The product is comprised of a minimally invasive surgical trocar (Outer sheath sleeve, Inner trocar and Optical obturator) and accessories (Lens cleaning syringe and Lens cleaning tube). There are two tubes with a luer lock connector attached to the InterLock Trocar. The tube connected to the Outer sheath sleeve is used for abdominal insuf ation and the other attached to the Inner trocar is used for the objective lens cleaning function. The design of the InterLock Trocar maintains the laparoscope and the hand instrument in direct alignment. This feature provides a surgeon with control of the laparoscope image and the hand instrument with one hand, meaning the laparoscope is in direct alignment or parallel to the hand instrument. The hand instrument is always in the eld of view of the laparoscope. The laparoscope does not need to be held by another surgeon or health care personnel. The InterLock Trocar holds the laparoscope and no additional surgeon or assistant is required to control operation of the laparoscope.

This device is intended to be used with a video processor, light sourse, monitor, hand instruments, electorosurgical unit and other ancillary equipment for minimally invasive observation, diagnosis and treatment in general abdominal, gynecologic and thoracic areas.

FUJIFILM Video Laparoscope EL-R740M30 is intended to be used with a video processor, light source, monitor, hand instruments, electrosurgical unit and other ancillary equipment for minimally invasive observation, diagnosis and treatment in general abdominal, gynecologic and thoracic areas.

This device is intended to be used with a video processor, light sourse, monitor, hand instruments, electorosurgical unit and other ancillary equipment for minimally invasive observation, diagnosis and treatment in general abdominal, gynecologic and thoracic areas.

This device is designed to be used with the endoscope holder "Point Setter" manufactured by Mitaka Kohki Co., Ltd.

The Pointsetter is indicated for use as a holder for an endoscope

The UniARM is for use in holding medical devices such a endoscopes and retractors in surgery.

This device is designed to be used with the endoscope holder "UniARM" manufactured by Mitaka Kohki Co., Ltd.

Laparoscope 10 x 344 mm, 0°, UHD

Laparoscope 10 x 344 mm, 30°, UHD

Laparoscope 5 x 312 mm, 0°

Laparoscope 5 x 312 mm, 30°

Laparoscope 2 x 258 mm, 30º

Laparoscope 2 x 258 mm, 0º

TipVisionTM Videoscope 10x341mm 0° AC

TipVisionTM Videoscope 10x341mm 30° AC

24-inch LCD Full HD medical monitor

24-inch LCD Full HD medical monitor

27-inch LCD Full HD medical monitor

27-inch LCD Full HD medical monitor

27-Inch 4K LCD Medical Monitor

27-Inch 4K LCD Medical Monitor

27-Inch 4K LCD Medical Monitor

27-Inch 4K LCD Medical Monitor

31-Inch 4K medical monitor

31-Inch 4K medical monitor

31-Inch 4K medical monitor

31-Inch 4K medical monitor

31-Inch 4K medical monitor

31-Inch 4K medical monitor

55-Inch 4K medical monitor

55-Inch 4K medical monitor

55-Inch 4K medical monitor

55-Inch 4K medical monitor

31-Inch 4K medical monitor

55-Inch 4K medical monitor

55-Inch 4K medical monitor

IP Converter

IP Converter

IP Converter (DVI Optical)

IP Converter (SDI Optical)

Network System Manager

Network System Manager

Network System Manager

Tenaculum Forceps, jaws Ø 7 mm, double action, Ø 10 mm, WL 420 mm, incl. outer tube Ø 13 mm

Grasping Forceps, single action, Ø 10 mm, WL 420 mm, incl. outer tube Ø 13 mm

Tenaculum Forceps, jaws Ø 10 mm, double action, Ø 10 mm, WL 420 mm, incl. outer tube Ø 13 mm

Changable outer tube Ø 13mm for forceps Ø 10mm, WL 420 mm

Tenaculum forceps Ø 13 / 10mm, WL 330mm, jaws Ø 10mm, double action, two teeth, ring handle stainless with flap-ratchet, non demountable, LL,stainless steel shaft, thread connection, incl. exchangeable outer tube

Claw grasper forceps Ø 13 / 10mm, jaws Ø 10mm, single action, two teeth, ring handle stainless with flap-ratchet, non demountable, LL, WL 330mm, shaft stainless steel, thread connection, incl. exchangeable outer tube