3M™ Ranger™ Blood/Fluid Warming Unit, 24500, 120V-ENG-B, 1 Each

3M™ Ranger™ Fluid Warming Unit, Model 245, 120V-ENG-E , 1 each, 24500

3M™ Ranger® Fluid Warming Unit, Model 245, 120V-ENG-E 24500

3M™ Ranger™ Fluid Warming Unit, Model 245, 120V-ENG-E, Military , 1 each, 24533

24533 RANGER 245 MILITARY DEPLOY KIT-SMALL, MD245 120V-ENG-E

3M™ Ranger™ Fluid Warming Unit, 29500, Model 295, 120V-ENG-E, Refurbished

3M™ Ranger™ Fluid Warming Unit, Model 295, 120V-ENG-E, Refurbished , 1 each, 29500

3M™ Ranger® Fluid Warming Unit, Model 295, 120V-ENG-E, Refurbished 29500

3M™ Ranger™ Blood/Fluid Warming Unit, 29501, 120V-ENG-B, Refurbished, Corrugate Packaging, 1 Each

Assy, buddy, Power Module 120V, Unit

Assy, buddy, Power Module 230V, Unit

ASSY, BUDDY HEATER UNIT

ASSY, BUDDY LITE BATTERY HOUSING AND HEATER UNIT

ASSY, BUDDY LITE WITH AC, BATTERY HOUSING AND HEATER UNIT

Assy, buddy 2, Power Module, Unit

buddy, 120V SYSTEM, ENGLISH US CORD

buddy, 120V SYSTEM, FRENCH US CORD

buddy, 230V SYSTEM, DUTCH, STANDARD EUROPEAN CORD

buddy, 230V SYSTEM, ENGLISH, ISRAEL CORD

buddy, 230V SYSTEM, ENGLISH STANDARD EUROPEAN CORD

buddy, 230V SYSTEM,ENGLISH, SWITZERLAND CORD

buddy, 230V SYSTEM, ENGLISH, UK CORD

buddy, 230V SYSTEM, FRENCH STANDARD EUROPEAN CORD

buddy, 230V SYSTEM,FRENCH, SWITZERLAND CORD

buddy, 230V SYSTEM, GERMAN STANDARD EUROPEAN CORD

buddy, 230V SYSTEM,GERMAN, SWITZERLAND CORD

buddy, 230V SYSTEM, ITALIAN, STANDARD EUROPEAN CORD

buddy, 230V SYSTEM, ITALIAN, SWITZERLAND CORD

6 X Box 24=144

BUDDY 2 SYSTEM, ENGLISH

BUDDY 2 SYSTEM, UK

A blood warmer and IV fluid warmer, the Thermal Angel is a battery-powered disposable, lightweight easy to use portable blood and IV fluid warming device. The Thermal Angel blood warmer works in your environmen

The TA-UB1 Thermal Angel Ultra Battery is a rechargeable 12V LifePO4 (LFP) battery designed to power the Thermal Angel TA-200.

Rechargeable battery pack for powering the °M Warmer

Rechargeable battery pack for powering the °M Warmer

Disposable IV Fluid / Blood Warmer unit

Charger for charging the Power Pack / Power Pack+ (rechargeable battery packs)

The LifeWarmer Quantum Battery is an extremely powerful and intelligent battery in a small, lightweight package- weighing only 16 oz. The Quantum Battery powers the whole warming system with state-of-the-art Lithium Polymer cells harnessing 44 Volts of electrical potential. The battery, fully charged, is able to warm and maintain up to 2 units ( 900mL +/- 100mL) of cold (4C) blood products or IV solutions to a pre-set temperature of 100.4°F (38+/- 2C) at a flow rate of 100 mL/min (depending on the ambient temperature). Or, approximately 1700 mL of 20C IV solution to a set point of 38C +/- 2C at a flow rate of 200 mL/min.The Quantum Battery is built for use in the most austere and tactical environments. It is IP67 rated for water resistance and is the only portable fluid warming battery that has a disable feature on the audible alarm for tactical considerations. The Quantum Life Warmer Battery is rechargeable with a service life of 500 charge/discharge cycles.It is important to keep the Quantum Battery charged and ready for use. Always re-charge after deployment, even if the battery was not fully discharged. The battery can be kept plugged into the Quantum Charger, as the intelligent Battery senses charge demand and will charge as needed but never overcharge. The Battery has a “Status” button to check the state of charge at any moment, with 3 colored LEDs to inform the user about the condition of the battery.

The Lifewarmer Quantum Charger from is an AC-powered reusable device that can fully charge the Quantum Battery rapidly and safely. The Charger has built-in algorithms to ensure proper, steady charging without overcharging or damaging the health and integrity of the battery. The Battery can go from nearly 0% to full within 90 minutes. The Life Warmer Charger has two colored LED lights to inform the provider of the status of charge and condition of the battery.The Quantum Battery Charger connects to the Battery via an omni-directional plug that allows for rapid energy transfer while prioritizing safety even in cases of hasty disconnection. The Quantum Battery will alert the user if there is any issue associated with the health of the battery. The Charger comes supplied with a 6-foot AC power cord.

The Life Warmer Quantum Controller is the command center of the Quantum Blood and Fluid Warming System. It contains the microprocessor and control algorithm that continually assesses temperature input from tubing thermistors and regulates the energy provided to the tubing heating elements in the proximal and/or distal segments to reach and maintain temperature between 100.4°F (38°+/- 2°C) at patient delivery. The Controller receives power when connected to the Battery and modulates the energy flow to the TIS/TTS-B. The Quantum Controller has two connections, one for the battery and one for the Thermal Tubing of choice. The connection to the battery is an omni-directional plug for ease of insertion and the connection is safe and secure. The connection to the TIS or TTS-B is bi-directional and simple to execute- it’s plug and play.The Controller has LED lights on the shoulder of the device to inform the user about the output temperature and flow of the fluid. It will visually alert the care provider to the status of the system.The Controller is reusable and comes fitted with a Jacket that permits the mating (connection) of the TIS or TTS-B Life Warmer tubing circuit connector to the connector slot on the Controller.

The LifeWarmer Quantum Thermal Infusion Set (TIS) is the revolutionary IV tubing set that allows for safe, rapid warming of IV fluids without adding hardly any additional steps to the normal IV setup process. Modeled after standard IV infusion tubing, the familiar configuration allows for ease of use. The sophisticated intelligence and proprietary warming technology are integrated into the tubing system for simplicity and to reduce additional equipment and procedural steps. Roughly the same size and weight as standard IV tubing, there is almost no additional equipment burden.The Quantum IV administration tubing is double-extruded to yield a configuration that has both an inner tubing layer and an outer tubing layer. A conductive heating element is between the two layers but does not come in contact with the fluid path or disrupt the laminar flow. The outer tubing layer acts as an insulator while the inner tubing layer transfers the heat from the heating element to the fluid path. Thermistors located in the tubing continually measure temperature and provide that input to the Quantum Controller. The monitoring and independent application of energy (heat) along the fluid path allows the Quantum to respond to varying temperature inputs from the fluid source to near the point of patient entry to ensure fluid temperature is the right temperature at delivery.The Quantum Life Warmer, fully charged, is able to warm and maintain up to approximately 1700 mL of 20C IV solution to a set point of 100.4F (38 +/- 2C) at a flow rate of 200 mL/min. Effective warming flow rates range from 2 to 200 mL/minute depending on input fluid temperature and ambient conditions.

The LifeWarmer Quantum Thermal Transfusion Set- Blood is the revolutionary IV tubing set that allows for safe, rapid warming of blood, blood products, or IV fluids without adding hardly any additional steps to the normal IV setup process. Modeled after standard blood infusion tubing, the familiar configuration allows for ease of use. The sophisticated intelligence and proprietary warming technology are integrated into the tubing system for simplicity and to reduce additional equipment and procedural steps. Roughly the same size and weight as standard blood tubing, there is almost no additional equipment burden.The Quantum IV administration tubing is double-extruded to yield a configuration that has both an inner tubing layer and an outer tubing layer. A conductive heating element is between the two layers but does not come in contact with the fluid path or disrupt the laminar flow. The outer tubing layer acts as an insulator while the inner tubing layer transfers the heat from the heating element to the fluid path. Thermistors (thermal resistors) located in the tubing continually measure temperature and provide that input to the Quantum Controller. The monitoring and independent application of energy (heat) along the fluid path allows the Quantum to respond to varying temperature inputs from the fluid source to near the point of patient entry to ensure fluid temperature is the right temperature at delivery.The Quantum Life Warmer, fully charged, is able to warm and maintain up to 2 units ( 900mL +/- 100mL) of cold (4C) blood products or IV solutions to a pre-set temperature of 100.4F (38+/- 2C) at a flow rate of 100 mL/min (depending on the ambient temperature). Or, approximately 1700 mL of 20C IV solution to a set point of 38C +/- 2C at a flow rate of 200 mL/min. Effective warming flow rates range from 2 to 200 mL/minute depending on input fluid temperature and ambient conditions.

The Lifewarmer Quantum Blood and Fluid Warming System is a Game-Changing innovation that has succeeded in closing a critical capability gap previously left exposed by other commercial off-the-shelf fluid warmers currently fielded. Size, weight, performance, and ease of use are no longer collective barriers to the delivery of whole blood in far forward and near point of injury (POI) prehospital casualty management.The Quantum exceeds all healthcare and logistical requirements for the delivery of warmed blood or fluids across the defined spectrum of care. The system consists of unique thermal administration sets that incorporate sensing elements with an integrated heating system that does not disrupt the fluid path. With advanced intelligence throughout the system, the lightweight Controller modulates and moderates the energy flow to the integrated heating elements to ensure consistent normothermic fluid delivery to the casualty. The 44V battery is the smallest in category, able to rapidly adjust power distribution based on the temperature and flow rate of the input fluid. This creates a highly efficient system capable of previously unrealized performance optimizations. The Quantum system has an operational weight of just 22 total ounces yet can deliver two units of 39°F Whole Blood (WB) at 100mL/min with an output temperature of 100.4°F (38°+/- 2°C) with only a 24 second warm-up period. The Quantum Blood and Fluid Warming System provides the Tactical Health Care Professional with significant technological overmatch in the fight to eliminate preventable combat death.Quantum System Contents:1 x Controller1 x Battery1 x Battery Charger2 x TTS-B (Thermal Transfusion Set - Blood)NOTE: TTS-B is Single Use Only, Supplied sterile via Ethylene Oxide

The Lifewarmer Quantum Blood and Fluid Warming System (IV Fluid ONLY Configuration) is a Game-Changing innovation that has succeeded in closing a critical capability gap previously left exposed by other commercial off-the-shelf fluid warmers currently fielded. Size, weight, performance, and ease of use are no longer collective barriers to the delivery of whole blood in far forward and near point of injury (POI) prehospital casualty management.The Quantum exceeds all healthcare and logistical requirements for the delivery of warmed blood or fluids across the defined spectrum of care. The system consists of unique thermal administration sets that incorporate sensing elements with an integrated heating system that does not disrupt the fluid path. With advanced intelligence throughout the system, the lightweight Controller modulates and moderates the energy flow to the integrated heating elements to ensure consistent normothermic fluid delivery to the casualty. The 44V battery is the smallest in category, able to rapidly adjust power distribution based on the temperature and flow rate of the input fluid. This creates a highly efficient system capable of previously unrealized performance optimizations. The Quantum system has an operational weight of just 22 total ounces yet can deliver two units of 39°F Whole Blood (WB) at 100mL/min with an output temperature of 100.4°F (38°+/- 2°C) with only a 24 second warm-up period. The Quantum Blood and Fluid Warming System provides the Tactical Health Care Professional with significant technological overmatch in the fight to eliminate preventable combat death.Quantum System Contents:1 x Controller1 x Battery1 x Battery Charger2 x TIS (Thermal Infusion Set)NOTE: TIS is Single Use Only, Supplied sterile via Ethylene Oxide and Not Intended for use with Blood and Blood Products

KIT, QUANTUM ULTIMATE INTENSIVE RESUSCITATION CARRY (Q.U.I.C.K.) - BASIC

PVC infusion extension

DEHP-free