Geri Connect & Geri Assess connects one or more Geri incubators through a LAN. The Geri Connect & Geri Assess software enables multiple users to access and review patient/embryo data, using a Chrome browser on their PC workstations.

The Geri Embryo Incubator is a benchtop incubator with six modular incubation chambers each with its own temperature control capability and separate gas inlet feed. Each chamber contains heating elements in its lid and base, together with an orange light source (591 nm) and camera with integrated optics thattake time-lapse images of embryos and allows operators to view embryos without removing them from the incubation chamber. Inside each chamber is a filter used to filter the gas mixture entering the incubation chamber from the gas supply. The gas is supplied from standard premixed medical gas cylinders.The Geri Embryo Incubator includes firmware to control the incubator settings, and software to control patient information and settings.

Geri Connect & Geri Assess connects one or more Geri incubators through a LAN. The Geri Connect & Geri Assess software enables multiple users to access and review patient/embryo data, using a Chrome browser on their PC workstations.

Geri Connect & Geri Assess connects one or more Geri incubators through a LAN. The Geri Connect & Geri Assess software enables multiple users to access and review patient/embryo data, using a Chrome browser on their PC workstations.

This equipment is designed for providing an environment with controlled temperature, CO2, (other gases), and elevated humidity for the development of ova or embryos at or near Body temperature.

This equipment is designed for providing an environment with controlled temperature, CO2, (other gases), and elevated humidity for the development of ova or embryos at or near Body temperature.

This equipment is designed for providing an environment with controlled temperature, CO2, (other gases), and elevated humidity for the development of ova or embryos at or near Body temperature.

This equipment is designed for providing an environment with controlled temperature, CO2, (other gases), and elevated humidity for the development of ova or embryos at or near Body temperature.

This equipment is designed for providing an environment with controlled temperature, CO2, (other gases), and elevated humidity for the development of ova or embryos at or near Body temperature.

BT37 Benchtop Incubator - Origio

BT37 Benchtop Incubator.

BT37 Benchtop Incubator

Kryo 360 Controller Rate Freezer - 1.7 Chamber Only

Kryo 360 Controlled Rate Freezer. 3.3 litre Chamber Only

Kryo 560 Controlled Rate Freezer - 16 LItre Chamber Only

Kryo ART Freezer System. 1.7 Litre Chamber

Kryo ART Controlled Rate Freezer System. 16 Litre Chamber

Kryo ART Freezer System. 3.3 Litre Chamber

Kryo ART Controlled Rate Freezer. 1.7 litre Chamber Only

Kryo ART Controlled Rate Freezer. 16 litre Chamber Only

Kryo ART Controlled Rate Freezer. 3.3 litre Chamber Only

Assisted Reproduction Accessories

Assisted Reproduction Accessories

Assisted Reproduction Accessories

Direct Heat CO2 Incubator

Direct Heat CO2 Incubator

Water Jacketed CO2 Incubator

Water Jacketed CO2 Incubator

Water Jacketed CO2 Incubator

Water Jacketed CO2 Incubator

Water Jacketed CO2 Incubator

Water Jacketed CO2 Incubator

Water Jacketed CO2 Incubator

Water Jacketed CO2 Incubator

Direct Heat CO2 Incubator

Direct Heat CO2 Incubator

Direct Heat CO2 Incubator

Direct Heat CO2 Incubator

Direct Heat CO2 Incubator

Direct Heat CO2 Incubator

Controlled Rate Freezer

Controlled Rate Freezer

Controlled Rate Freezer

Controlled Rate Freezer

Controlled Rate Freezer

Controlled Rate Freezer

EmbryoScope+ consists of the following devices with the following indications for use:The EmbryoScope+ incubator provides an environment with controlled temperature and gas concentrations (CO2 and O2) for the development of embryos at or near body temperature. Use of the EmbryoScope+ incubator is limited to five days (120 hr) covering the time from post insemination to day five of development.The EmbryoSlide+ culture dish is intended for preparing, storing, and transferring human embryos. The EmbryoSlide+ culture dish must be used together with the EmbryoScope+ incubator.The EmbryoViewer software is intended for displaying, comparing, storing, and transferring images generated by theEmbryoScope+ incubator. This software includes a user annotation function for capturing information on embryo development parameters as well as a user-defined modeling function, which allows the user to combine annotatedinformation on embryo development parameters to aid in embryo selection. The EmbryoViewer software does not controlany hardware components in the EmbryoScope+ incubator.The ES Server software is intended to store, archive and transfer data. In addition, this software includes functions for managing models and performing calculations based on image data and embryo development parameters.The EmbryoScope+ incubator, EmbryoViewer software, and ES Server software must be used together to export embryo images from the EmbryoScope+ incubator. The EmbryoViewer software and ES Server software must be used together to analyze the embryo images.

The EmbryoScope time-lapse incubator (Version D) provides an environment with controlled temperature, CO2 (and other gases) for the development of embryos. This model has an integrated inverted microscope and imaging system for embryo viewing. Device use is limited to five days (120 hr) covering the time from post-fertilization to day 5 of development.