O'Connor scleral depressor/marker, 5 3/8'', double-ended, 3.0mm wide teardrop-shaped end and 1.5mm Gass marking end, flat handle

Ambler Toric Intra-op axis marker, 5'', outer diameter 13.5mm, 10.5mm inner marking diameter, rotating ring aligns the marks in proper meridian, round handle, titanium

Ambler Toric reference marker, 4 1/2'', angled 70 degrees shaft, 3 blades, 10.0mm inside diameter, 15.0mm outside diameter, round handle

Ambler Toric reference marker, 4 1/2'', angled 70 degrees shaft, 3 blades, 10.0mm inside diameter, 15.0mm outside diameter, round handle, titanium

Ambler Toric reference marker, 4 7/8'', 3 blades in-line mounted, 10.0mm inside diameter, 15.0mm outside diameter, round handle

Ambler Toric Intra-op axis marker II, 4 7/8'', two 2.0mm marking blades, cutouts on the two 180 degrees positions for easy alignment, round handle, titanium

Ambler Toric Intra-op axis marker II, 4 7/8'', two 2.0mm marking blades, cutouts on the two 90 degrees positions for easy alignment, round handle, titanium

Anis corneal suture placement radial marker, 4 1/4'', 8 blades, 8.0mm diameter center opening, flat handle

Anis radial marker, 4 3/8'', 4 blades, 4.0mm diameter center opening, 12.5mm outside diameter, flat handle

Anis radial marker, 4 3/8'', 6 blades, 4.0mm diameter center opening, 12.5mm outside diameter, flat handle

Anis radial marker, 4 3/8'', 8 blades, 4.0mm diameter center opening, 12.5mm outside diameter, flat handle

Anis radial marker, 4 3/8'', 10 blades, 4.0mm diameter center opening, 12.5mm outside diameter, flat handle

Anis radial marker, 4 3/8'', 12 blades, 4.0mm diameter center opening, 12.5mm outside diameter, flat handle

Anis radial marker, 4 3/8'', 16 blades, 4.0mm diameter center opening, 12.5mm outside diameter, flat handle

Bores 2-ray axis marker, 4 1/8'', flat handle, for use with 8850E

Bores corneal radial marker, 6 blades, 4.0mm center opening, 9.5mm outside diameter, flat handle

Bores corneal radial marker, 8 blades, 4.0mm center opening, 9.5mm outside diameter, flat handle

Bores 2-ray axis marker, 3 7/8'', round handle, for use with 8855E

Bores 2-ray axis marker, 4'', flat handle, for use with 8873E

Bores low-profile optic zone marker, 3 3/4'', 1.60mm diameter, 1.65mm ring height, round handle

Bores low-profile optic zone marker, 3 3/4'', 10.0mm diameter, 1.65mm ring height, round handle

Yamane-Adan Marker II For IOL Fixation, Flat Handle, Stainless Steel

Optic Zone Marker 5.75 mm Stainless Steel

Optic Zone Marker 6.0 mm Stainless Steel

Toric IOL Marker for marking two 2.5mm axis marks, Flat Handle,..100mm Overall Length

Beveled Degree Gauge with four alignment notches, atraumatic teeth, 5 Degree Ruler markings on bevel with handle mounted at 0, 104mm Overall Length, Round Knurled Handle, Stainless Steel

Beveled Degree Gauge with four alignment notches, 5 Degree Ruler markings on bevel with handle mounted at 0,..104mm Overall Length, Round Knurled Handle, Stainless Steel

Alignment Gauge Marker with three blunt alignment pins to mark the 3, 6, & 9 o'clock positions, Round Knurled..Handle, 100mm Overall Length, Stainless Steel

bores optic zone marker, 3 3/4" (9.5 cm), 4.50 mm

bores optic zone marker, 3 3/4" (9.5 cm), 2.75 mm

bores optic zone marker, 3 3/4" (9.5 cm), 3.00 mm

bores optic zone marker, 3 3/4" (9.5 cm), 3.25 mm

bores optic zone marker, 3 3/4" (9.5 cm), 3.50 mm

bores optic zone marker, 3 3/4" (9.5 cm), 3.75 mm

bores optic zone marker, 3 3/4" (9.5 cm), 4.00 mm

bores optic zone marker, 3 3/4" (9.5 cm), 4.25 mm

bores optic zone marker, 3 3/4" (9.5 cm), 4.75 mm

bores optic zone marker, 3 3/4" (9.5 cm), 5.00 mm

bores optic zone marker, 3 3/4" (9.5 cm), 6.00 mm

bores optic zone marker, 3 3/4" (9.5 cm), 8.00 mm

bores radial marker, 4.0 mm center opening, 9.5 mm o.d., 6 blades

bores radial marker, 4.0 mm center opening, 9.5 mm o.d., 8 blades

osher-neumann corneal marker, for radial keratotomy, 4.5 mm inner diameter, 4 1/4" (11.0 cm), 4 blades

osher-neumann corneal marker, for radial keratotomy, 4.5 mm inner diameter, 4 1/4" (11.0 cm), 6 blades

osher-neumann corneal marker, for radial keratotomy, 4.5 mm inner diameter, 4 1/4" (11.0 cm), 8 blades

4 1/4" Hoffer O-Z Marker 6.00mm Diameter with Smooth and Flat Handle, Extra Fine Crosshairs

5" Thornton Swivel Fixation Ring, with 13mm Ring and 8mm Cutout, Titanium, Round Knurled Handle

4 5/8" Mendez Degree Gauge, Calibrates Every 10 Degrees, From 0 to 180 Degrees

Toric Marker, 11mm ID, 15mm OD, Marks 0 Degree to 180 Degree Increments, Labeled Every 30 Dregees, Head Mounted at 0 Degrees, Holes Every 90 Degrees, Titanium Round Handle

Gonioprism, Gonio Mag 1.20x, Contact Diameter 9mm, Static Field of View 90 Degrees