The Total Wrist Fusion System (WRISTFUSEEST) consists of two pre-contoured plates with eight holes and a straight plate with nine holes. These plates are fixed to the bone with 2.7mm diameter and 3.5mm diameter screws. Instrumentation is provided to assist in the implantation. Screws with a diameter of 2.7mm vary in size length from 10mm to 24mm. Screws with a diameter of 3.5mm vary in size length from 12mm to 28mm. This system is generally indicated for use in patients with arthritis of the joints of the wrist, rheumatoid wrist deformities, carpal instability, wrist pain, brachial plexus nerve palsies, and loss of function due to osteoarthritis.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal non sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal non sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal non sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

The Advansys Hindfoot Complete set includes TTC plates, screws for fixation, and instruments to be used as a guide for the implants, including K-wire. The TTC Plates are intended for arthrodesis of the ankle joint and distal tibia, fractures, osteotomies, fusions and replantation of small bones in the foot and ankle.

The Advansys Midfoof Complete set includes Lisfranc plates, Lapidus plates, screws, and instruments used to guide the implants, including K-wire. The Lisfranc Plate consists of an osteosynthesis plate designed to bridge the tarsometatarsal joints. It is available in different sizes and is implanted using the locking system fixation screws and washers. Lisfranc Plates are intended for fractures, fusions, osteotomies and replantation of small bones at the tarsometatarsal joints. The Lapidus Plate consists of an osteosynthesis plate designed to bridge the first tarometatarsal joint.

In case of severe deformities of the forefoot, the basal osteotomy may be preferable to the distal osteotomy as it promotes a greater degree of correction. Due to the leverage effect, the osteotomy site is subject to significant dorsiflexion stress. The B-BOP plate is specifically designed for basal osteotomy of the first metatarsal, with strong stability. The set includes the B-BOP plates, screws, and instruments, including K-wire.

The Hallu-Fix set includes Hallu-Fix S Plates, Hallu-Fix C Plates, screws, and instruments. The Hallu Plates are low profile titanium plates dedicated to first metatarsophalangeal arthrodesis. The system is intended to be implanted for fixation of fractures, osteotomies or arthrodesis of the first metatarsophalangeal joint.

The Hallu-Lock plate system is a low profile titanium plate dedicated to the first metatarsophalangeal arthrodesis. This system includes Hallu-Lock C plates, Hallu-Lock S plates, screws, and instruments. The system is intended to be implanted for fixation of fractures, osteotomies or arthrodesis of the first metatarsophalangeal joint.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

SURFIX Titanium cancellous bone screws and lock screws are available in different lengths from 20 mm to 100 mm.

The TIBIAXYS System consists of bone plates and screws for arthrodesis, osteotomies and fractures of ankle joint, distal tibia and fibula. The system is indicated for fixation of bone fractures or bone reconstruction. Instruments are provided for guidance of implants.

The UNI-CP system includes compression plates, screws, and instruments.The compression plate is indicated for fixation of bone fractures or bone reconstruction. By widening the “eye” on the interaxis of the plate, mechanical deformation leads to narrowing of the interaxis of the two legs and thus provides compression between the two bone fragments to fuse. The rigidity of the “legs” is obtained using the locking system.

The Integra Spider Limited Wrist Fusion titanium plate includes eight-holes and can be utilized in various locations throughout the wrist.

The Mini Integra Spider Limited Wrist Fusion titanium plate includes six-holes and can be utilized in various locations throughout the wrist.

The Integra Spider Limited Wrist Fusion titanium bone screw is used in assembly with the plate.

The Integra Spider Limited Wrist Fusion titanium bone screw is used in assembly with the plate.

The Integra Spider Limited Wrist Fusion titanium bone screw is used in assembly with the plate.

The Integra Spider Limited Wrist Fusion titanium bone screw is used in assembly with the plate.

The Integra Spider Limited Wrist Fusion titanium bone screw is used in assembly with the plate.

The Construct Ankle Fusion Plate System consists of two anterior tibia-talus and a lateral tibia-talus-calcaneus arthrodesis plates. The plates are contoured to the peri articular anatomy and have tapered threaded holes which accept compression or locking threaded screws with a major thread diameter of 4.5 or 6.5mm. All plates and screws are manufactured from stainless steel or titanium. The system is intended for arthrodesis of the ankle joint and distal tibia, fractures, osteotomies, fusions, and replantation of small bones in the foot and ankle. Instruments are provided.

The Integra Total Foot System is a system containing bone plates and screws designed for use in the skeletally mature foot. The plates and screws are intended to be used for stabilization and fixation of fresh fractures, intra-articular and extra-articular fractures, joint depression and multi-fragmentary fractures. The subject devices can also be used in revision procedures, joint fusion, and in reconstructing the small bones of the feet. Implants are manufactured from Titanium Alloy. . The fore foot and mid foot plates include open wedge plates, universal forefoot plates, MPJ fusion plates, and tarsalis plates. Also included are 2.7mm locking screws.

The Headed Compression Screw System contains compression screws used with the Ankle Fusion Plating System. This set includes screws with diamter 6.5mm or 7.5mm.

The Headed Compression Screw System contains compression screws used with the Ankle Fusion Plating System. This set includes screws with diameter 4.0mm or 4.5mm

The Integra Proximal Humeral Fracture Plate System will be composed of left and right humeral reconstruction plate implants in two options, GT Plate and LP Plate. The plates and screws are made of 316L Stainless Steel. The GT plate is designed to cover the greater tuberosity and is available in four-hole, seven-hole, and ten-hole lengths or sizes. The LP plate is designed to sit lower on the greater tuberosity and is available in three-hole, six-hole, and nine-hole lengths or sizes. The system will also feature 3.5mm locking screws, non-locking compression screws and non-locking partial thread screws. In addition 2.7mm locking screws are also available. The system is indicated for fractures and fracture dislocations, osteotomies and non-unions of the proximal humerus. Instruments are provided to assist with the implants.

The Integra Total Foot System is a system containing bone plates and screws designed for use in the skeletally mature foot. The plates and screws are intended to be used for stabilization and fixation of fresh fractures, intra-articular and extra-articular fractures, joint depression and multi-fragmentary fractures. The subject devices can also be used in revision procedures, joint fusion, and in reconstructing the small bones of the feet. Implants are manufactured from Titanium Alloy. The rear foot plates include lapidus plates, interpositioning plates, universal rear foot plates, rear foot reconstruction plates, flat line arthrodesis plates, dwyer displacement plates, calcaneus plates, and fibular plates. Also included are 3.7mm locking screws.

The Spider™ and Mini Spider™ Limited Wrist Fusion System consist of two stainless steel plates, featuring an 8-hole and a 6-hole design. Both plates have a unique three-dimensional design optimized for four-corner and other limited wrist fusion procedures.

The Integra Total Foot System is a system containing bone plates and screws designed for use in the skeletally mature foot. The plates and screws are intended to be used for stabilization and fixation of fresh fractures, intra-articular and extra-articular fractures, joint depression and multi-fragmentary fractures. The subject devices can also be used in revision procedures, joint fusion, and in reconstructing the small bones of the feet. Implants are manufactured from Titanium Alloy. The instrumentation is manufactured from biocompatible materials. The 2-Hole Straight Tarsalis Plate is offered in short and long lengths. The 3-Hole and 10-Hole Straight Plates are included in the system as standard lengths. The 4-Hole Straight Tarsalis Plate is offered in both standard and short lengths. The Crescentic Tarsalis Plate is offered in left and right configurations. The 4-Hole Diamond Plate is available in left and right configurations. The T-Shaped Tarsalis Plates are offered in 4-hole, 5-hole, and 6-hole configurations. The 5-hole designs are provided in straight, left, and right configurations. The 6-hole is only provided in straight configuration. Upon request, the 6-hole, 7-hole and 8-hole T-Shaped Tarsalis Plates are available.

The Integra Total Foot System is a system containing bone plates and screws designed for use in the skeletally mature foot. The plates and screws are intended to be used for stabilization and fixation of fresh fractures, intra-articular and extra-articular fractures, joint depression and multi-fragmentary fractures. The subject devices can also be used in revision procedures, joint fusion, and in reconstructing the small bones of the feet. Implants are manufactured from Titanium Alloy. The instrumentation is manufactured from biocompatible materials. The fore foot plates include open wedge plates, universal forefoot plates, MPJ fusion plates, and tarsalis plates.

The Integra Total Foot System is a system containing bone plates and screws designed for use in the skeletally mature foot. The plates and screws are intended to be used for stabilization and fixation of fresh fractures, intra-articular and extra-articular fractures, joint depression and multi-fragmentary fractures. The subject devices can also be used in revision procedures, joint fusion, and in reconstructing the small bones of the feet. Implants are manufactured from Titanium Alloy. The instrumentation is manufactured from biocompatible materials. The rear foot plates include lapidus plates, interpositioning plates, universal rear foot plates, rear foot reconstruction plates, flat line arthrodesis plates, dwyer displacement plates, calcaneus plates, and fibular plates.

The VIPERSET consists of a distal volar radius plate with the option of either a 4-hole or 6-hole plate with left or right configuration, screws in diameter size 2.7mm or 3.5mm, and instruments to assist in the implantation. The set is generally indicated for reduction, stabilization and internal fixation of proximal radius bone fractures and osteotomies involving the distal radius.