Integra® Jarit® Hand Drill, 9-3/4", Cannulated, Jacobs Chuck, Wires And Pins Up To 4mm Aluminum

Integra® Jarit® Hand Drill, 6-1/4", Cannulated, Jacobs Chuck, Wires And Pins Up To 4mm Aluminum

Integra® Ruggles®-Redmond™ Anterior Cervical Fusion (ACF) Distractor, Twist Drill

The sterile 2' in 1' cannulated shouldered drill, with a 4.0mm diameter cilyndrical attachment and a total length of 65mm, a four lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm compression screws and the shape of the screw heads to allow complete countersink.

The sterile 2' in 1' cannulated shouldered drill, with a 4.0mm diameter cylindrical attachment and a total length of 65mm, a four lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm compression screws and the shape of the screw heads to allow complete countersink.

The sterile 2' in 1' cannulated shouldered drill, with a 4.0mm diameter cylindrical attachment and a total length of 65mm, a four lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm compression screws and the shape of the screw heads to allow complete countersink.

Non-sterile '2 in 1' shouldered drill to single drive the body of compression screws and shape of the screw heads to allow complete countersink

"2 in 1" drill dia. 2,2 / 3mm L.18mm AO

"2 in 1" drill dia. 2,2 / 3mm L.7mm AO

The sterile '2 in 1' shouldered drill, with a 1.6mm diameter cylindrical attachment and a total length of 90mm, a four lip 3mm diameter countersink, is designed to drill in one single drive the body of the 3.0 & 3.7mm compression screws and the shape of the screw heads to allow complete countersink.

AO "2 in 1" cannulated drill dia. 2.2/3.0mm L.22mm

The sterile '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total length of 90mm, a five lip 3mm diameter countersink, is designed to drill in one single drive the body of the the 3.0 & 3.7mm screws and the shape of the screw heads to allow complete countersink.

The short drill of diameter 4.3 mm and of total length 210 mm is used to pre-drill before the insertion of the calcaneus screws.

The drill of diameter 4.3 mm and of total length 210 mm is used to pre-drill before the insertion of the tibial screws and the optional talar screw.

The drill of diameter 5.0 mm and of total length 180 mm is used to drill before the insertion of the compression rod.

The long drill of diameter 4.3 mm and of total length 250 mm is used to pre-drill before the insertion of the calcaneus screws.

The cannulated drill of diameter 7.0 mm and of total length 220 mm is used to pre-drill before the reaming of the intramedullary canal.

The medium drill of diameter 4.3 mm and of total length 235 mm is used to pre-drill before the reaming of the intramedullary canal.

The cannulated drill of diameter 9.0 mm and of total length 220 mm is used to pre-drill before the reaming of the intramedullary canal.

The conical reamer of diameter 10.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.

The conical reamer of diameter 11.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.

The conical reamer of diameter 12.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.

The conical reamer of diameter 13.5 mm and of total length 350 mm for Panta® XL Nail is used to ream the intramedullary canal to prepare the nail insertion.

The drilling guide is placed in the plate on the bone and is used to guide the drilling of the bone and protect the soft tissues.

The drilling guide is placed in the plate on the bone and is used to guide the drilling of the bone and protect the soft tissues.

The drill is used in conjunction with the half pins for the Integra External Fixation System.

The drill is used in conjunction with the half pins for the Integra External Fixation System.

The drill is used in conjunction with the half pins for the Integra External Fixation System.

Integra® Total Foot SystemThe drill bit is a cutting tool used to create cylindrical holes. This drill bit is made for a Stryker fitting.

Integra® Total Foot SystemThe drill bit is a cutting tool used to create cylindrical holes. This drill bit has an AO fitting.

Integra® Total Foot SystemThe drill guide is used for precision and accuracy when drilling.

Integra® Total Foot SystemThe Synthes Style Twist Drill is a drill with a twisted body and is used for making holes.

Integra® Total Foot SystemThe Synthes Style Twist Drill is a drill with a twisted body and is used for making holes.

Integra® Total Foot SystemThe Synthes Style Twist Drill is a drill with a twisted body and is used for making holes.

CAPTURE™ Cannulated Screw SystemThe overdrill is used with the TC-series 2.0/2.5 mm screws.

CAPTURE™ Cannulated Screw SystemThe overdrill is used with the TC-series 3.0/4.0 mm screws.

CAPTURE™ Cannulated Screw SystemThe TH cannulated relief drill is used to create a pilot hole for the screw.

Humeral Resurfacing Arthroplasty

Humeral Resurfacing Arthroplasty

Humeral Resurfacing Arthroplasty

Titan™ Reverse Shoulder SystemThe double drill guide is used for precision and accuracy when drilling.

Titan™ Total Shoulder SystemThe glenoid short solid peg drill is used with the total shoulder system.

Titan™ Total Shoulder SystemThe cannulated center starter drill is used with the total shoulder system.

Titan™ Total Shoulder SystemThe cannulated peg drill is used with the total shoulder system.

Titan™ Total Shoulder SystemThe solid center starter drill is used with the total shoulder system.

Titan™ Total Shoulder SystemThe glenoid solid peg drill is used with the total shoulder system.

CAPTURE™ High Torque Screw SystemThe cannulated drill is a tool used for making holes.

CAPTURE™ High Torque Screw SystemThe drill is a tool used for making holes.

CAPTURE™ High Torque Screw SystemThe drill is a tool used for making holes.

CAPTURE™ High Torque Screw SystemThe drill is a tool used for making holes.