The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.

The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLINK Management Software allows the user to set up the DataLINK communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.

The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming data to third party software.Software is available in English, Chinese, and Japanese.

The Biometrics Analysis Software is a comprehensive tool for EMG, Goniometer and associated sensor analysis including real-time data analysis as the data is collected. The Analysis software also contains all of the features of the Management Software: The DataLOG Management Software allows the user to set up the DataLOG communications with the computer, configure the sensors, collect and save the data. the Management software also contains the Dynamic Link Library for streaming dataSoftware is available in English, Chinese, and Japanese.

DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13.

DataLINK (DLK900) is an on-line general purpose subject worn programmable Data Acquisition System allowing the user to collect both analog and digital data from a wide range of wired sensors including Biometrics' Goniometers, Torsiometers, active EMG sensors, Accelerometers, Pinchmeters, Hand Dynamometers and Contact Switches.This product is independently tested and certified to BS EN 60601-1:2006 + A1:2013

A modern microprocessor controlled general purpose amplifier system which is designed to be worn by the subject. The Amplifier (K800) provides a user friendly method for collecting signals from a variety of sensors including goniometers, sEMG and related signals, in a format which may readily be connected to proprietary display and recording systems including A/D cards.This product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13

The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13

The DataLOG is the latest in data acquisition technology developed to meet the needs of researchers for portable data collection and monitoring in human performance, sports science, medical research, industrial ergonomics, gait laboratories, and educational settings. Includes: 8 channel data acquisition unit, Bluetooth adapter, 6 x Micro SD cards, Card reader, Management Software, instrument caseThis product is independently tested and certified to BS EN 60601-1:2006 + A1:2013

Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting.Hand (fingers and thumb) – active and passive, extension and flexion, abduction and adduction, lateral deviations and rotational deformities, calculation of total active motion and total passive motionWrist – active and passive, extension and flexion, radial and ulnar deviationThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13

Accurate measurements of upper and lower extremity ROM with precise electronic tools for evaluation and progress reporting:Wrist, Forearm, Elbow, Shoulder, Hip, Knee, Ankle, Documentation of amputation, ankylosis, and arthrodesis for the above jointsThis product is independently tested and certified to EN 60601-1:1990 including Amendments A1, A2 and A13

Professional Suite is a wireless medical device that measures, records, and reports movements and muscle activity of the lowerback / lumbar spine. The system also measures range of motion in the sagittal and coronal anatomical planes.

Movement Suite is a wireless medical device that measures, records, and reports movements and muscle activity of the lowerback / lumbar spine. The system also measures range of motion in the sagittal and coronal anatomical planes.

MotionSense Digital Goniometer

MotionSense Adhesive Refill Kit

MotionSense Knee Alignment Block

OrthoLogIQ PT Version 1.0

MotionSense Application Version 1.3

MotionSense Application Version 1.4

MotionSense Application Version 1.5

A clinical information system with a digital goniometer. The system can be configured to have diagnostic functionality but does not allow or enable direct diagnosis. No decisive information for making a diagnosis can be provided by the system on its own and it cannot provide diagnosis by itself, nor does it perform as a clinician or provide an indicative diagnosis to the lay user.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

A device to assist the clinician with establishing an objective assessment of a person’s range of movement. The device is intended to be non-invasive, non-surgical and transient.

Now you can have all of these capabilities in one compact system. Surface EMG, rangeof motion and muscle testing – may be purchased separately or in any combination. The modulardesign of the MES 9000 allows you to purchase any combination of modules and expand as yourpractice grows. The MES 9000 --- the modular system that enables you to do a complete, integratedevaluation with objective documentation that supports your diagnosis.

By using sophisticated sensors within the inclinometers, the Dynamic ROM system records the patient's entire ROM through the plane of movement and displays it in a graphical representation on the computer screen. Unlike other systems which simply give you a static endpoint measurement of ROM, Dynamic ROM captures the entire movement. The figure to your left shows a typical Dynamic ROM recording of the dynamic motion of the spine during three repetitions of lumbar flexion and extension. The numbers correspond with the figure to the left showing the patient's motions.The inclinometers are attached to straps placed over T12 and S1. The recording of the sensor at S1 is subtracted from the recording at T12 to produce the DIFFerential recording graph which represents the true motion of the patient's lumbar during lumbar flexion and extension motion. The flattened DIFF tracing line on each repetition during end-point indicates that both sensors are moving at the same rate of speed, and that the lumbar lordosis stopped unfolding before the end-point of trunk flexion had been reached. With this information the clinician can observe and assess the quality and the pattern of the patient's motion as well as the quantity of the ROM. Dynamic Range of Motion from Noromed elevates range of motion testing from a simple measurement tool to a true diagnostic tool.

Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.

Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM@Home mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.

For the stand-alone mode version of the subject device, the SPM01K1 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes, and protective skin.

For the wireless mode version of the subject device, to be used in combination with a dedicated control software running on a pc/laptop, the content of the SPM01K2 convenience kit is: 1 electrostimulator SPM01M2 configuration; electrodes, and protective skin.

For the wireless mode version of the subject device, to be used in combination with an application installed on a tablet, the SPM01K3 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM mobile application (SPM01A1).

For the wireless mode version of the subject device, combined with an application installed on a tablet that can be used in a home environment, the content of the SPM01K4 convenience kit is: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM@Home mobile application (SPM01A2).

The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it.The SPM01M1 configuration supports Bluetooth Low Energy communication. In this case it can connect directly to a smartphone/tablet on which a dedicated app is installed. The dedicated control software is supplied via an usb receiver and must be used by a properly trained healthcare professional.

The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it. The SPM01M2 configuration supports IEEE 802.15.4 radio interface. In this case it provides for the exchange of data between the stimulator and a receiver connected to the PC, which then collects the data sent by the device and synchronizes the transmission. The dedicated control software is supplied via an usb receiver.