Laminar Hook - W5 x H4

Laminar Hook - W5 x H5

Laminar Hook - W5 x H7

Laminar Hook - W5 x H9

Laminar Hook - W7 x H5

Laminar Hook - W7 x H7

Pedicle Hook - 5mm

Pedicle Hook - 7mm

Pedicle Hook - 9mm

Awl

Guide Pin A

Guide Pin B

Probe - Curved

Probe - Straight

Tester - Thin

Tester - Thick

Torque Wrench for Set Screw

Torque Wrench for T/L

In-Site Rod Bender (Left)

In-Site Rod Bender (Right)

5 Hex Driver

4 Hex Driver

Compressor

Spreader

Cutter II

Rocker (Rexious)

Rocker

Screw Adjustor

Head Alignment

Rod Bender

Cutter

Cross Link Driver

Power Holder

Set Screw Driver Guide

Set Screw Driver

Rod Pusher

Spreader

Compressor

Derotator

Rod Holder

Retractor

Rod Fork

Transverse Link Set 80mm

Transverse Link Set 100mm

Transverse Link Set 110mm

Transverse Link Set 120mm

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.

The AnyPlus Spinal Fixation System consists of various hooks, screws, rods and connectors and is intended to create a rigid spinal construct. The components are manufactured from Ti6AI4V ELI according to ISO 5832-3 and ASTM F-136. The screws are available from 4.0 to 10.5mm diameters with lengths ranging from 20 to 100mm (Length does not include the screw head). Specialized instruments are available for the application and removal of the Anypluss Spinal Fixation System. AnyPlus Spinal Fixation System are non-cervical spinal fixation devices intended for use as posterior pedicle screw fixation systems (T1 -S2), a posterior hook fixation system (T 1-5), or as a anterolateral fixation system (T8-L_5). All components in the system are limited to skeletally mature patients. System components are to be used for immobilization and stabilization of the spine as an adjunct to fusion. These devices are indicated for all of the following indications regardless of the intended use: degenerative disc disease (defined as discogenic back pain with degeneration of the disc confirmed by history and radiographic studies), spondylolisthesis, trauma (i.e., fracture or dislocation), deformities or curvatures (i.e., scoliosis, kyphosis, and/or lordosis, Scheuermann's Disease), tumor, stenosis, pseudoarthrosis, and failed previous fusion.