Polyaxial Screw, 4.5mm x 15mm

Polyaxial Screw, 4.5mm x 25mm

Polyaxial Screw, 5.0mm x 8mm

Polyaxial Screw, 5.0mm x 10mm

Polyaxial Screw, 5.0mm x 12mm

Polyaxial Screw, 5.0mm x 14mm

Polyaxial Screw, 5.0mm x 15mm

Polyaxial Screw, 5.0mm x 16mm

Polyaxial Screw, 5.0mm x 18mm

Polyaxial Screw, 5.0mm x 20mm

Polyaxial Screw, 5.0mm x 22mm

Polyaxial Screw, 5.0mm x 24mm

Polyaxial Screw, 5.0mm x 25mm

Polyaxial Screw, 5.0mm x 26mm

Polyaxial Screw, 5.0mm x 28mm

Polyaxial Screw, 5.0mm x 30mm

Polyaxial Screw, 5.0mm x 35mm

Polyaxial Screw, 5.0mm x 40mm

Polyaxial Screw, 5.0mm x 45mm

Polyaxial Screw, 5.0mm x 50mm

Rod, 3.5mm x 85mm

Rod, 3.5mm x 90mm

Rod, 3.5mm x 95mm

Rod, 3.5mm x 100mm

Rod, 3.5mm x 105mm

Rod, 3.5mm x 110mm

Rod, 3.5mm x 115mm

Rod, 3.5mm x 150mm

Rod, 3.5mm x 200mm

Used to gain access through the bone cortex.

Probe for use with the CarboClear Posterior Cervical Screw System

Part of the CarboClear Posterior Cervical Screw System Instrumentation Set.

Part of the CarboClear Posterior Cervical Screw System instrumentation set

Bone surface reamer for use with the CarboClear Posterior Cervical Screw System

Depth gauge for use with the CarboClear Posterior Cervical Screw System (to measure depth of a prepared hole)

Part of the CarboClear Posterior Cervical Screw System Instrumentation Set

Torque Limiter (Straight Handle) for use with the CarboClear Posterior Cervical Screw System

Torque Limiter (Straight Handle) for use with the CarboClear Posterior Cervical Screw System

Bone Tap for use with the CarboClear Posterior Cervical Screw System

Bone Tap for use with the CarboClear Posterior Cervical Screw System

Drill bit for use with the CarboClear Posterior Cervical Screw System

Drill bit for use with the CarboClear Posterior Cervical Screw System

Rod holding forceps, for use with the CarboClear Posterior Cervical Screw System

Screwdriver for use with the CarboClear Posterior Cervical Screw System

Prebent Rod, Ø3.5mm x 100mm

Prebent Rod, Ø3.5mm x 110mm

Prebent Rod, Ø3.5mm x 120mm

Prebent Rod, Ø3.5mm x 90mm

Long Prebent Rod Caddy

The COSY Cervicothoracic Occipital Rod-Screw is a multiple component, posterior spinal fixations system which consists of solid screws, cannulated screws, standard tulips, angulated tulips, curved rods, straight rods, hybrid rods, parallel connectors, inline connectors, occipital plates, occipital bone screws, hooks, and offset connectors. All implants, except of variations of the rods, are available in Ti-6AL-4V ELI per ASTM F136. Rods are available in Ti-6AL-4V ELI per ASTM F136 or Co-Cr28-Mo6 per ASTM F1537. The pedicle screws consist of a tulip and a pedicle screw shaft. The shaft has aprominent thread, to provide anchorage of the screw in the pedicle section of the vertebrae. Each tulip is securely attached to the rod via a set screw. The shafts of the pedicle screws are provided in different lengths, diameters, fully or partially threaded, and with a symmetric or asymmetric angulation to provided adaptability to the patient’s anatomy. The rods can be shortened on site by the surgeon. The occipital plate is available with four or five holes and areas to be bent for better fixation to the occipital part of the skull. The plate is fixed via bone screws and as two gliding tulips to provided anchoring of the rod. The gliding tulips are constructed similar to the tulips of the pedicle screws in the area of the rod- set screw -tulip intersection.