STAND ALONE PATIENT BED

WAVENET PLANNING SOFTWARE

ALLEGRO ANALYZER. The WaveLight® Topolyzer™ VARIO and WaveLight® Analyzer II diagnostic devices are measuring instruments intended for use in eye examinations to measure corneal topography. Data from these systems may be exported and used to support refractive surgical procedures with the WaveLight® laser systems.

REFRACTIVE SUITE SWIVEL BED

WAVELIGHT TOPOLYZER VARIO: The WaveLight® Topolyzer™ VARIO and WaveLight® Analyzer II diagnostic devices are measuring instruments intended for use in eye examinations to measure corneal topography. Data from these systems may be exported and used to support refractive surgical procedures with the WaveLight® laser systems.

WAVELIGHT EX500 EX LASER US

ALLEGRETTO WAVE EYE-Q EXCIMER

STAND ALONE PATIENT BED

WL ANALYZER II-USA

The MEL 80 Excimer Laser System is indicated for use in primary Laser Assisted in situ Keratomileusis (LASIK) treatments for the reduction or elimination of - myopia of less than or equal to -7.0 D with or without refractive astigmatism of less than or equal to -3.0 D, with a Maximum MRSE of -7.0 D- naturally occurring hyperopia of less than or equal to +5.0 D with or without refractive astigmatism of greater than +0.5 D and less than or equal to +3.0 D, with a maximum MRSE of +5.0 D in patients who are 21 years of age or older with documentation of stable manifest refraction over the past year as demonstrated by Change in sphere and cylinder of 0.5 D.

ASSY, EXCIMER LASER SYSTEM,STAR S4 IR,

ASSY, SYSTEM, WAVESCAN ACV

INSTALL CD,WS 3.68,OPM,US

IDESIGN ADVANCED WAVESCAN STUDIO US

ASSY, CRATED, TABLE, VISION

IDESIGN REFRACTIVE STUDIO ABERROMETER US

KIT, ABR UPGRADE, IDESIGN RS, US

PACK IN, IDESIGN, VISION TABLE UPGRADE

The Final Fit software receives the measured data from the Refractive Power/Corneal Analyzer OPD-Scan Model ARK-10000 via floppy disk etc. Then the Final Fit software performs a simulation of postoperative corneal shape and generates shot data using the imported data that was measured by the ARK-10000 and amounts of correction that are entered. The Final Fit software has two major functions: 1.Generating shot data to be used with the EC-5000 based on the measured data of the ARK-10000 2.Comparing postoperative data measured by ARK-10000 with the preoperative or target data (Simulated data just before generating shot data)

The Final Fit software receives the measured data from the Refractive Power/Corneal Analyzer OPD-Scan Model ARK-10000 via floppy disk etc. Then the Final Fit software performs a simulation of postoperative corneal shape and generates shot data using the imported data that was measured by the ARK-10000 and amounts of correction that are entered. The Final Fit software has two major functions: 1.Generating shot data to be used with the EC-5000 based on the measured data of the ARK-10000 2.Comparing postoperative data measured by ARK-10000 with the preoperative or target data (Simulated data just before generating shot data)

The Final Fit software receives the measured data from the Refractive Power/Corneal Analyzer OPD-Scan Model ARK-10000 via floppy disk etc. Then the Final Fit software performs a simulation of postoperative corneal shape and generates shot data using the imported data that was measured by the ARK-10000 and amounts of correction that are entered. The Final Fit software has two major functions: 1.Generating shot data to be used with the EC-5000 based on the measured data of the ARK-10000 2.Comparing postoperative data measured by ARK-10000 with the preoperative or target data (Simulated data just before generating shot data)

NIDEK EXCIMER LASER CORNEAL SURGERY SYSTEM, model Quest, is an ophthalmic laser system used for correction of corneal refraction and ablation of the corneal surface. The system is composed of a laser generator which produces an excimer laser radiation of wavelength 193nm, a beam delivery unit, an optical system for observation, a gas system, and a computer for system control. The system is designed to be user friendly for easy and safe operation with NIDEK’s advanced optoelectronic technology.

NIDEK EXCIMER LASER CORNEAL SURGERY SYSTEM, model EC-5000CXIII, is an ophthalmic laser system used for correction of corneal refraction and ablation of the corneal surface. The system is composed of a laser generator which produces an excimer laser radiation of wavelength193nm, a beam delivery unit, an optical system for observation, a gas system, and a computer for system control. The system is designed to be user friendly for easy and safe operation with NIDEK’s advanced optoelectronic technology.