The Vega Aligner #43 knee brace with Range of motion (ROM) is designed to stabilize the motion of the knee joint, keeping it aligned during flexion and extension movements. Constructed entirely from breathable materials, the next-to-skin layer is made from anti-bacterial and anti-allergy fabric. Its complex structure, equipped with patella stabilizer, offers comfortable containment of the patellar compartment, useful in cases of associated conditions (medial or lateral ligaments, anterior or posterior cruciate ligament and patellar instability). Two patented, multicentric, adjustable aluminum rods are included to control flexion and extension quickly and easily. The rods are equipped with bearings supporting the condyles and rigid tibial and femoral supports to control rotation. L1832 or L1833 approved.INDICATIONSA knee orthosis with adjustable knee joints used for:• Patellar chonodropathy (osteochondral repairs)• Retropatellar osteoarthitis• Post-operative and post-traumatic irritations including rehabilitation of: MCL, LCL, PCL, ACL (Sprains, Meniscus injuries, Lateral, Anterior, Medial & Posterior tilt, etc.)• Post lateral release surgery to limit the extension and flexion of the joint• Patella and knee instabilities (Patella Dislocation, Patella Subluxation, Patella Alta, Patella stabilization, Patella tendon repairs)• General knee pain• Mild Chondromalacia• Condylar Fractures• Tibial Plateau Fractures

The Vega Aligner #43 knee brace with Range of motion (ROM) is designed to stabilize the motion of the knee joint, keeping it aligned during flexion and extension movements. Constructed entirely from breathable materials, the next-to-skin layer is made from anti-bacterial and anti-allergy fabric. Its complex structure, equipped with patella stabilizer, offers comfortable containment of the patellar compartment, useful in cases of associated conditions (medial or lateral ligaments, anterior or posterior cruciate ligament and patellar instability). Two patented, multicentric, adjustable aluminum rods are included to control flexion and extension quickly and easily. The rods are equipped with bearings supporting the condyles and rigid tibial and femoral supports to control rotation. L1832 or L1833 approved.INDICATIONSA knee orthosis with adjustable knee joints used for:• Patellar chonodropathy (osteochondral repairs)• Retropatellar osteoarthitis• Post-operative and post-traumatic irritations including rehabilitation of: MCL, LCL, PCL, ACL (Sprains, Meniscus injuries, Lateral, Anterior, Medial & Posterior tilt, etc.)• Post lateral release surgery to limit the extension and flexion of the joint• Patella and knee instabilities (Patella Dislocation, Patella Subluxation, Patella Alta, Patella stabilization, Patella tendon repairs)• General knee pain• Mild Chondromalacia• Condylar Fractures• Tibial Plateau Fractures

The Vega Aligner #43 knee brace with Range of motion (ROM) is designed to stabilize the motion of the knee joint, keeping it aligned during flexion and extension movements. Constructed entirely from breathable materials, the next-to-skin layer is made from anti-bacterial and anti-allergy fabric. Its complex structure, equipped with patella stabilizer, offers comfortable containment of the patellar compartment, useful in cases of associated conditions (medial or lateral ligaments, anterior or posterior cruciate ligament and patellar instability). Two patented, multicentric, adjustable aluminum rods are included to control flexion and extension quickly and easily. The rods are equipped with bearings supporting the condyles and rigid tibial and femoral supports to control rotation. L1832 or L1833 approved.INDICATIONSA knee orthosis with adjustable knee joints used for:• Patellar chonodropathy (osteochondral repairs)• Retropatellar osteoarthitis• Post-operative and post-traumatic irritations including rehabilitation of: MCL, LCL, PCL, ACL (Sprains, Meniscus injuries, Lateral, Anterior, Medial & Posterior tilt, etc.)• Post lateral release surgery to limit the extension and flexion of the joint• Patella and knee instabilities (Patella Dislocation, Patella Subluxation, Patella Alta, Patella stabilization, Patella tendon repairs)• General knee pain• Mild Chondromalacia• Condylar Fractures• Tibial Plateau Fractures

The Vega Aligner #43 knee brace with Range of motion (ROM) is designed to stabilize the motion of the knee joint, keeping it aligned during flexion and extension movements. Constructed entirely from breathable materials, the next-to-skin layer is made from anti-bacterial and anti-allergy fabric. Its complex structure, equipped with patella stabilizer, offers comfortable containment of the patellar compartment, useful in cases of associated conditions (medial or lateral ligaments, anterior or posterior cruciate ligament and patellar instability). Two patented, multicentric, adjustable aluminum rods are included to control flexion and extension quickly and easily. The rods are equipped with bearings supporting the condyles and rigid tibial and femoral supports to control rotation. L1832 or L1833 approved.INDICATIONSA knee orthosis with adjustable knee joints used for:• Patellar chonodropathy (osteochondral repairs)• Retropatellar osteoarthitis• Post-operative and post-traumatic irritations including rehabilitation of: MCL, LCL, PCL, ACL (Sprains, Meniscus injuries, Lateral, Anterior, Medial & Posterior tilt, etc.)• Post lateral release surgery to limit the extension and flexion of the joint• Patella and knee instabilities (Patella Dislocation, Patella Subluxation, Patella Alta, Patella stabilization, Patella tendon repairs)• General knee pain• Mild Chondromalacia• Condylar Fractures• Tibial Plateau Fractures

The Vega Aligner #43 knee brace with Range of motion (ROM) is designed to stabilize the motion of the knee joint, keeping it aligned during flexion and extension movements. Constructed entirely from breathable materials, the next-to-skin layer is made from anti-bacterial and anti-allergy fabric. Its complex structure, equipped with patella stabilizer, offers comfortable containment of the patellar compartment, useful in cases of associated conditions (medial or lateral ligaments, anterior or posterior cruciate ligament and patellar instability). Two patented, multicentric, adjustable aluminum rods are included to control flexion and extension quickly and easily. The rods are equipped with bearings supporting the condyles and rigid tibial and femoral supports to control rotation. L1832 or L1833 approved.INDICATIONSA knee orthosis with adjustable knee joints used for:• Patellar chonodropathy (osteochondral repairs)• Retropatellar osteoarthitis• Post-operative and post-traumatic irritations including rehabilitation of: MCL, LCL, PCL, ACL (Sprains, Meniscus injuries, Lateral, Anterior, Medial & Posterior tilt, etc.)• Post lateral release surgery to limit the extension and flexion of the joint• Patella and knee instabilities (Patella Dislocation, Patella Subluxation, Patella Alta, Patella stabilization, Patella tendon repairs)• General knee pain• Mild Chondromalacia• Condylar Fractures• Tibial Plateau Fractures

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

The OA (Osteoarthritis) Knee Brace with Range of Motion (#46) brings your comfort to a new level with its elegant and light design. Available for the right or left knee, this brace alleviates knee pain by reducing the weight on your medial or lateral compartment by using the three-point pressure system. It is composed of two aluminum reinforced semi-rigid straps that surround the distal region (above the knee) and the proximal region (below the knee). These straps are to be custom molded to allow for an optimal torsion support. Additionally, these straps are bound together by a patented articulated aluminum support that is easily adjustable for flexion and extension and accessible within a zipped pocket.The patient can adjust the amount of lateral pressure applied by choosing between two different buttress (cushion) thicknesses. The high surface of the brace’s sleeve allows for comfortable support around the affected joint. The patellar support on this brace is easy and simple to use and allows for a straightforward fitting of the product. Should you need to mold the brace to certain specifications or simply to wash the sleeve, the articulated support could be easily removed by unzipping the brace (see instructions). INDICATIONS: Use this knee brace for the following indications:• Mild to moderate medial compartment OA without instability.• Meniscus procedures.• Chondral defect procedures.• Moderate lateral compartment OA without instability; it is possible to reduce the load on the lateral compartment by using a “right” brace on a left leg or a “left” brace on a right leg.

Telescopic Post-Operative Knee Brace (#66T) This medical device is a Post-Op Knee brace with articulated telescopic bars in light aluminium alloy, padded by soft MTP and sponge fabric in contact with skin to reduce sweating. It has separate bands in order to ensure greater breathability of the leg and valves for belts specially designed to reduce the pressure of the bands. It also has adjustable strap closures that insures the orthosis is tightly secured to the limb.The knee brace has a Range of Motion Joint, adjustment of flexion and extension at 10° (flexion 0° / 120°; extension 0° / 90°) and an option to block joint every 10°. It contains condylar protective detachable pads. Its shape provides an excellent anatomic stabilization of the limb and comfortable to wear and use.One size fits all. L1832 or L1833 approved.INDICATIONSPost-operative knee ligament reconstruction treatment, complete prosthesis, femoral or tibia fractures at the knee, valgus and varus osteotomy.Recommended to treat post-traumatic knee strain requiring semi-flexion immobilization.

ELASTIC KNEE SUPPORT SIZE 2XL

ELASTIC KNEE SUPPORTSIZE L

ELASTIC KNEE SUPPORT SIZE M

ELASTIC KNEE SUPPORT SIZE S

ELASTIC KNEE SUPPORT SIZE XL

OPEN KNEE SUPPORT WITH ARTICULATION SIZE L

OPEN KNEE SUPPORT WITH ARTICULATION SIZE M

knee brace with patellar reinforcement - size L

knee brace with patellar reinforcement - size M

knee brace with patellar reinforcement - size s

knee brace with patellar reinforcement - size XL

KNEE SUPPORT WITH PATELLA OPENING - SIZE L

KNEE SUPPORT WITH PATELLA OPENING - SIZE M

KNEE SUPPORT WITH OPENING PATELLA - SIZE S

KNEE SUPPORT WITH PATELLA OPENING - SIZE XL

OPEN KNEE SUPPORT R4 SIZE L

OPEN KNEE SUPPORT R4 SIZE S

REINFORCED KNEE PAD - SIZE L

REINFORCED KNEE PAD - SIZE XL

NEOPRENE PATELLA STRAP SIZE: UNIVERSAL

KNEE SUPPORT WITH SIDE SHAPE - SIZE L

KNEE PAD WITH SIDE WHALES

KNEE PAD WITH SIDE WHALES

KNEE SUPPORT WITH SIDE SHAPE - SIZE XL

OPEN KNEE SUPPORT WITH PATELLA SUPPORT - SIZE M

OPEN KNEE SUPPORT WITH PATELLA SUPPORT - SIZE