ICT Indexing Connector

Couch Top

Couch Adapter

Couch Extension

Couch Top Base SIEMENS ZXT

Couch Top Base ELEKTA Precise

iBEAM® Indexing Bar (Set of 3) is designed for the BodyFIX® 14 Indexing System and allows indexing and positioning of compatible surface mounted accessories

iBEAM® Couchbase Adapter VARIAN Exact

Couchtop Base Varian Exact

Couch Top (Short)

iBEAM® evo CT Overlay rests above the plane of the original CT Cradle.

iBEAM® evo Couchtop EP is compatible to the Elekta Precise PSS.

iBEAM® evo Couch Adapter allows mounting of the BrainLAB Couchmount System for Varian Exact.

iBEAM® evo ESARTE Adapter

ICT Couch Calibration Bar

iBEAM® evo CT Overlay GE LS RT16 rests above the plane of the original CT Cradle.

iBEAM® evo Couchtop CA is compatible to Siemens ZXT, Varian ETR and Nucletron Simulix table pedestals with the configuration of the respective Ibeam Couchbase Adapters.

iBEAM® evo CT Overlay Siemens P20 rests above the plane of the original CT Cradle.

iBEAM® Couchbase Adapter NSE

iBEAM® evo CT Overlay Philips BCT rests above the plane of the original CT Cradle.

iBEAM® evo CT Overlay GE LS PU rests above the plane of the original CT Cradle.

iBEAM® evo CT Overlay Toshiba Aquilion LB rests above the plane of the original CT Cradle.

iBEAM®evo CT Overlay Siemens PHS-1600 rests above the plane of the original CT Cradle.

iBEAM®evo CT Overlay Siemens MPT rests above the plane of the original CT Cradle.

The Connexion™ modular couchtop consists of a Base Board that attaches to the Precise Table and several modules which can be attached (and detached) to the Base Board. Each of the different modules is designed to fulfill specific treatment scenarios.

Designed to address the needs of IGRT, IMRT and VMAT techniques, the Connexion™ Imaging Module accomplishes this through its low, homogenous beam attenuation properties, providing a sophisticated solution for modern treatment techniques.

Being able to reduce attenuation in this scenario results in lower skin dose to the patient. The Connexion™ Central Opening Module provides a central opening where attenuation and dose build-up are minimized, allowing you to reduce skin doses.

By reducing attenuation and build-up doses to the skin from treatment fields that would normally pass though the couchtop, the Connexion™ Lateral Opening Module is designed for techniques that use oblique fields, such as SBRT. This module increases clearance around the couchtop, giving you extra flexibility in treatment set-up when you need it.

Providing patient-specific immobilization for head and neck treatments often require a variety of immobilization devices. The Connexion™ Head and Neck Module provides a dedicated solution to support head and neck immobilization, by providing a common interface to not only Elekta immobilization devices, but also other commonly used third party accessories.

The removable accessory rails are positioned along the superior lateral area of the Connexion™ Imaging Module and the Connexion™ Central Opening Module. They are designed to be simply and easily removed between treatments.

The Indexing Bridges are required in order to use the BodyFIX® 14 Target Positioner together with the Connexion™ Lateral Opening Module for SBRT.

Connexion™ Tennis Racket Inlay

The Short Indexing bar is required for accurate repositioning of accessories at the middle area of the Connexion™ Lateral Opening Module.

Non-Elevating Radiographic Patient Table HXVF

Non-Elevating Radiographic Patient Table HXVF

Elevating Radiographic Patient Table HXVF

Siemens Biograph mCT one piece couchtop

For use with Siemens Biograph mCT

Siemens Biograph mCT with Lok-Bar™ , rectangular extension, and storage rack

Siemens Biograph mCT UCT LE couchtop with Lok-Bar™

For use with Universal Couchtop™ Long Extension

For use with ThermFix Immobilization System

For use with ThermFix Immobilization System

For use with ThermFix Immobilization System

For use with ThermFix Immobilization System

For use in Photon and CT

ProForm™ Pediatric MR Overlay