Snap Kover

Light Handle Cover

Disposable Equipment Cover

Light Handle Cover

1. Line Voltage: 220~230V, 50/60Hz2. Output Power: 5.0kW3. Fluoroscopy Mode - F-mode: 0.5~10mA - P-mode: 0.5~20mA - Boost mode: 30mA - DS mode: 10~30mA4. Radiography Mode - kV range: 40~125kV, mA range: 20~100mA, mAs range: 0.8~200mAs5. X-ray Tube - XRR-2551(Rotating Type), Focal Spot: 0.3/0.6, Target Angle: 10degree, Anode Heat Storage: 210kHU6. Detector - VIVIX-D 1212G (VIEWORKS), 12 x 12 inch

1. Line Voltage: 220~230V, 50/60Hz2. Output Power: 3.2kW3. Fluoroscopy Mode - F-mode: 0.5~10mA - P-mode: 0.5~20mA - Boost mode: 30mA - DS mode: 10~30mA4. Radiography Mode - kV range: 40~110kV, mA range: 15~40mA, mAs range: 0.8~100mAs5. X-ray Tube - XRR-2551(Rotating Type), Focal Spot: 0.3/0.6, Target Angle: 10degree, Anode Heat Storage: 210kHU6. Detector - VIVIX-D 1212G (VIEWORKS), 12 x 12 inch

1. Line Voltage: 220~230V, 50/60Hz2. Output Power: 2.4kW3. Fluoroscopy Mode - F-mode: 0.5~10mA - P-mode: 0.5~20mA - Boost mode: 30mA - DS mode: 10~30mA4. Radiography Mode - kV range: 40~110kV, mA range: 16~30mA, mAs range: 0.8~100mAs5. X-ray Tube - XRR-2551(Rotating Type), Focal Spot: 0.3/0.6, Target Angle: 10degree, Anode Heat Storage: 210kHU6. Detector - VIVIX-D 1212G (VIEWORKS), 12 x 12 inch

1. Line Voltage: 220~230V, 50/60Hz2. Output Power: 5kW3. Fluoroscopy Mode - F-mode: 0.5~10mA - P-mode: 0.5~20mA - Boost mode: 30mA - DS mode: 10~30mA4. Radiography Mode - kV range: 40~125kV, mA range: 20~100mA, mAs range: 0.8~200mAs5. X-ray Tube - XRR-2551(Rotating Type), Focal Spot: 0.3/0.6, Target Angle: 10degree, Anode Heat Storage: 210kHU6. Image Intensifier - E5830SD-PA4(TOSHIBA), 9inch7. Camera - CCD, Resolution: 1K X 1K

The KMC-650 is a great solution to produce radiological images of patient during medical operations. This inverter control X-ray unit visualizes the anatomical structure on screen, which is obtained by X-ray fluoroscopy and the image intensifier. This system can be applied in emergency room, operation room, cast room or etc. of hospital.

The KMC-950 is a great solution to produce radiological images of patient during medical operations. This inverter control X-ray unit visualizes the anatomical structure on screen, which is obtained by X-ray fluoroscopy and the image intensifier. This system can be applied in emergency room, operation room, cast room or etc. of hospital.

SPINEL 12HD Surgical Mobile Fluoroscopic X-ray System is intended to provide fluoroscopic and radiographic imaging of the patient during diagnostic, surgical and interventional procedures. Clinical applications may include but are not limited to digital subtraction angiography, orthopedic, neurological, abdominal, vascular, cardiac, critical care and emergency room procedures.

The SPINEL 3G is a great solution to produce radiological images of patient during medical operations. This inverter control X-ray unit visualizes the anatomical structure on screen, which is obtained by X-ray fluoroscopy and the image intensifier. This system can be applied in emergency room, operation room, cast room or etc. of hospital.

The CLISIS SYSTEMS is a floor-mounted radiographic, fluoroscopic and linear tomographic system that consists of a 90/90 universal remote-controlled table with variable height, an R&F panel connected to a digital system and a voltage generator.

The Discovery RF180 is a floor-mounted radiographic, fluoroscopic and linear tomographic system that consists of a 90/90 universal remote-controlled table with variable height, an R&F panel connected to a digital system and a voltage generator.

It's a system for acquiring digital images in fluoroscopy and radiography modes from a solid state large-sized detector, specifically designed to be integrated in radiology diagnostic rooms and emergency rooms. Opera D4000RF allows radiological diagnostic examinations to be performed in real time on the skeleton, the gastro-intestinal tract, the vascular system and urogenital system.

It's a system for acquiring digital images in fluoroscopy and radiography modes from a solid state large-sized detector, specifically designed to be integrated in radiology diagnostic rooms and emergency rooms. Opera D4000RF allows radiological diagnostic examinations to be performed in real time on the skeleton, the gastro-intestinal tract, the vascular system and urogenital system.

It's a system for acquiring digital images in fluoroscopy and radiography modes from a solid state large-sized detector, specifically designed to be integrated in radiology diagnostic rooms and emergency rooms. Opera D4000RF allows radiological diagnostic examinations to be performed in real time on the skeleton, the gastro-intestinal tract, the vascular system and urogenital system.

The device is a stretcher in carbon fiber and it is raised via an hydraulic piston mechanism which is controlled by a foot-pedal.

The Opera Swing is an x-ray diagnostic system and is indicated for performing general radiography, fluoroscopy and angiography procedures/applications.

STERILE DISPOSABLE EQUIPMENT COVER - C-ARM DRAPE 36" X 90" - EXTRA BAND

The 0909FCB flat panel detector employs a CsI:Tl scintillator for X-ray-to-light converter. Column-structurized CsI:Tl scintillator have high resolution performance due to much less light blurring, and is thus available for a longer period of time. CMOS active pixel detector makes extremely low noise level and highly sensitive performance. Due to seamless one chip CMOS, there is no data missing or artifacts. The high physical and functional performance of 0909FCB gives competitive image quality. The RAW files can be further processed as DICOM compatible image files by separate console SW for a radiographic diagnosis and analysis.

The IVL Catheter is a proprietary lithotripsy device delivered through the peripheral arterial system of the lower extremities to the site of an otherwise difficult to treat calcified stenosis. Energizing the lithotripsy device will generate pulsatile mechanical energy within the target treatment site, disrupting calcium within the lesion and allowing subsequent dilation of a peripheral artery stenosis using low balloon pressure. The IVL Catheter is comprised of an integrated balloon with an array of lithotripsy emitters for the localized delivery of pulsatile mechanical energy. The system consists of an IVL Catheter, an IVL Connector Cable and an IVL Generator. The IVL Catheter is available in four (4) sizes: 8.0 x 30mm, 9.0 x 30mm, 10.0 x 30mm, and 12.0 x 30mm. The L6 Peripheral IVL Catheter is compatible with a 7 or 8F sheath and has a working length of 110cm.The Shockwave L6 Peripheral IVL Catheter shaft contains an inflation lumen, a guidewire lumen, and the lithotripsy emitters. The inflation lumen is used for inflation and deflation of the balloon with 50/50 saline/contrast medium. The guidewire lumen enables the use of a 0.018” guidewire to facilitate advancement of the catheter to and through the target stenosis. The system is designed as ‘Over-the-wire’ (OTW) with 110cm shaft working length, so an exchange length (300cm) guidewire is indicated. The emitters are positioned along the length of the balloon working length for delivery of pulsatile mechanical energy. The balloon is located near the distal tip of the catheter. Two radiopaque marker bands within the balloon denote the length of the balloon to aid in positioning of the balloon during treatment. The balloon is designed to provide an expandable segment of known length and diameter at a specific pressure. The proximal hub has three ports: one for inflation/deflation of the balloon, one for guidewire lumen, and one for connection to the IVL Connector Cable.

The XR-MX/1000 system is a solid-state detector fluoroscopic X-ray system, primarily for urological applications (functional x-ray diagnostics, endourology and minimally invasive urological surgery). The system may be used for urological treatment, planning and diagnostic procedures.

The XR-MX/1000 system is a solid-state detector fluoroscopic X-ray system, primarily for urological applications (functional x-ray diagnostics, endourology and minimally invasive urological surgery). The system may be used for urological treatment, planning and diagnostic procedures.

The XR-MX/1000 system is a solid-state detector fluoroscopic X-ray system, primarily for urological applications (functional x-ray diagnostics, endourology and minimally invasive urological surgery). The system may be used for urological treatment, planning and diagnostic procedures.

Equipment for the extracorporeal induced shock wave therapy for stationary and mobile use.

Mobile C-arm

Mobile C-arm

Mobile C-arm

Mobile C-arm

Image-intensified fluoroscopic x-ray system, mobile

Image-intensified fluoroscopic x-ray system, mobile

Image-Intensified Fluoroscopic X-Ray System, Mobile

Image-Intensified Fluoroscopic X-Ray System, Mobile

Image-Intensified Fluoroscopic X-Ray, Mobile