Drill bit Ø2.7 mm, for 2.7 mm pins/nails, quick coupling

Applicator Ø3.2 mm, reusable, for 3.2 mm pins and for 1.5/2.0/2.7/3.2 mm nails

Drill bit Ø3.2 mm, for Ø3.2 mm pins/nails, with quick coupling

Applicator tip, arthroscopic, for 1.5/2.0 mm nails

Applicator handle, arthroscopic, for pins and nails

Applicator Drill Guide, Arthroscopic, for 1.5/2.0 mm nails

Sterilisation tray, for ActivaPin™ instruments

Applicator housing, arthroscopic, for pins and nails

Instrument set, for ActivaPin™

Drill bit Ø1.5 mm, for 2.0 mm screws, quick coupling

Tap Ø2.0 mm, for 2.0 mm screws

Countersink, for 2.0 mm screws

Double drill sleeve Ø1.5/2.0 mm, for 2.0mm screws

Drill bit Ø2.0 mm, for 2.7 mm screws, quick coupling

Tap Ø2.7 mm, for 2.7 mm screws

Double drill sleeve Ø2.0/2.7 mm, for 2.7mm screws

Drill bit Ø2.5mm, for 3.5 mm screws, quick coupling

Tap Ø3.5 mm, for 3.5 mm screws

Holding sleeve, for 2.0/2.7/3.5mm screws

Countersink, for 2.7/3.5 mm screws

Double drill sleeve Ø2.5/3.5 mm, for 3.5mm screws

Drill bit Ø3.2 mm, for 4.5 mm screws up to length 90 mm, quick coupling

Tap Ø4.5 mm, for 4.5 mm screws up to length 90 mm

Holding sleeve, for 4.5mm screws

Countersink, for 4.5mm screws

Double drill sleeve Ø3.2/4.5 mm, for 4.5mm screws

Drill bit Ø3.2 mm, for 4.5 mm screws up to length 70 mm, quick coupling

Tap Ø4.5 mm, for 4.5 mm screws up to length 45 mm

Protection sheath

Sterilization tray, for ActivaScrew™ instruments

T-handle, quick coupling

Small handle, quick coupling

Depth gauge, for 2.0/2.7/3.5 mm screws

Depth gauge, for 4.5 mm screws

HEX shaft, for 2.0/2.7/3.5 mm screws

HEX shaft, for 4.5mm screws

ActivaScrew™ Cannulated Instrument Set

K-wire Ø1.25 mm, length 150 mm, threaded tip, for 3.5mm cannulated screws

K-wire Ø1.25 mm, length 150 mm, trocar tip, for 3.5mm cannulated screws

K-wire Ø1.6 mm, length 150 mm, threaded tip, for 4.0/4.5mm cannulated screws

K-wire Ø1.6 mm, length 150 mm, trocar tip, for 4.0/4.5mm cannulated screws

K-wire Ø1.6 mm, length 300 mm, trocar tip, measuring ring at 150 mm, for 4/4.5 mm cannulated screws

Drill bit Ø2.7 mm, for 3.5 mm cannulated screws, quick coupling

Tap Ø3.5 mm, for 3.5 mm cannulated screws

Direct driver, for 3.5 mm cannulated screws

Double drill sleeve Ø2.7/3.5 mm, for 3.5 mm cannulated screws

Drill bit Ø3.2 mm, for 4.0 mm cannulated screws, quick coupling

Tap Ø4.0 mm, for 4.0 mm cannulated screws

Drill bit Ø3.5 mm, for 4.5 mm cannulated screws, quick coupling

Tap Ø4.5 mm, for 4.5 mm cannulated screws