Connection Tube DIN, CO2, ZGV plug (without valve) to 7/16"-20UNF fitting, ISO-colored, 1.50 m long.A length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)

Connection Tube DIN, CO2, ZGV connector (without valve) to 7/16"-20UNF fitting, ISO-colored, 3.00 m long.A length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)

Connection Tube DIN, CO2, ZGV connector (without valve) to 7/16"-20UNF fitting, ISO-colored, 6.00 m longA length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)

Connection Tube DISS, CO2, DISS fitting to 7/16"-20UNF fitting, ISO-colored, 1.50 m long.A length of reinforced colour-coded flexible tubing produced according to ISO5359 and intended to conduct compressed carbon dioxide (CO2) from a CO2 terminal unit or CO2 cylinder to a medical device that functions with CO2 (e.g., ventilator, insufflation system). The gas pressure in the tubing will be low, a "working pressure" (e.g., 3 - 5 bar), having been reduced by a regulator from a high pressure. The tubing is reinforced with, e.g., woven polyester or cotton, and intended for use within a static clinical environment (e.g., intensive care). It is available in various lengths, including standard coil lengths. This is a reusable device. (en)

CO2 high pressure Tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted ISO adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high-pressure tube 55 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted PIN index adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high pressure tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted PIN index adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high pressure tube, Storz Insufflator connection 7/16"-20UNF to W21.8_14 with sinter filter, 55 cm.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

CO2 high pressure tube 102 cm, Storz insufflator connection 7/16"-20UNF on both sides + mounted ISO adapter with sinter filter.A length of flexible tube intended to deliver and withstand gases under very high pressure, e.g., greater than 200 bar/3000 pounds per square inch (psi). It may be composed of any of several malleable or semi-rigid materials (e.g., plastic, rubber, or nylon), and braided with cotton wool and/or stainless steel. It is typically used to transport high pressure compressed medical gas to a pressure regulating device. It is available in various lengths, including standard coil lengths. This is a reusable device.

Oxymixer blender configurable with blender Low Flow or High Flow blender version.

Oxymixer blender High Flow SET

Oxymixer blender Low Flow SET

Oxymixer blender Low Flow with 15LPM Flowmeter

Oxymixer XL blender Low Flow