PORTABLE WORKSTATIONWirelessly Transfer Images Directly to PACS, Ultra-light, and Portable, Design tested to handle, water, dust, and splash resistanceThe DELWORKS FIT portable tablet workstation aims to maximize the portability and efficiency of the DELWORKS software - utilizing it anytime, anywhere.

The Anthem Generator is intended for use as part of a radiographic stationary x-ray system. The generator provides power and control for other parts of the system. It uses multi-pulse high frequency technology to produce waveforms near constant potential.

The Anthem Generator is intended for use as part of a radiographic stationary x-ray system. The generator provides power and control for other parts of the system. It uses multi-pulse high frequency technology to produce waveforms near constant potential.

The Anthem Generator is intended for use as part of a radiographic stationary x-ray system. The generator provides power and control for other parts of the system. It uses multi-pulse high frequency technology to produce waveforms near constant potential.

The Anthem Generator is a high-frequency x-ray generator designed for general radiographic applications..

The Anthem Generator is intended for use as part of a radiographic stationary x-ray system. The Generator provides power and control for other parts of the system. It uses multi-pulse high frequency technology to produce waveforms near constant potential.

The DM-FMT is the version of the DMX system which uses a floor mounted tubestand and does not perform synchronized tracking or stitching. This x-ray system can perform a comprehensive range of radiographic procedures.

The DM-FMT18M is the version of the DMX system which uses a floor mounted tube stand and does not perform tracking or stitching. This x-ray system can perform a comprehensive range of radiographic procedures.

The DM-FMT18T is the version of the DMX system which uses a floor mounted tube stand and performs synchronized tracking but not stitching. This x-ray system can perform a comprehensive range of radiographic procedures.

The DM-FWFC is the version of the DMX x-ray system that utilizes the floor to wall floor to ceiling tube mount (FWFC).

The DM-OTC18M is the version of the DMX system which uses an overhead tube crane and does not perform synchronized tracking or stitching. This x-ray system can perform a comprehensive range of radiographic procedures.

The DM-OTC18S is a version of the DMX x-ray system which allows for stitching and tracking. This system can perform a comprehensive range of radiographic procedures.

The DM-OTC18T is the version of the DMX system which uses an overhead tube crane and performs synchronized tracking but does not perform stitching. This x-ray system can perform a comprehensive range of radiographic procedures.

The Straight Arm is an economical and space-efficient X-ray system that can perform a comprehensive range of radiographic procedures.Its flexibility permits imaging of patients sitting or standing, as well as recumbent when optional mobile table is present.

The EV650 elevating table is designed for general purpose radiography and features a four-way floating table top with longitudinal and transverse travel. It uses electromechanical locks to maintain the desired position. It has a motor-driven telescopic base that can raise and lower the table top. It has a patient weight limit of 650 lbs.

The EV800 elevating table is designed for general purpose radiography and features a four-way floating table top with longitudinal and transverse travel. It uses electromechanical locks to maintain the desired position. It has a motor-driven telescopic base that can raise and lower the table top. It has a patient weight limit of 800 lbs.

The EV800T elevating table is designed for general purpose radiography and features a four-way floating table top with longitudinal and transverse travel. The EV800T is intended to be used with the DM-OTC18S auto-stitching system.

An x-ray system component intended to be mounted to the floor, to support and facilitate position of the x-ray tube.

An x-ray system component intended to be mounted to the floor, to support and facilitate position of the x-ray tube. The FMT18M does not allow for synchronized tracking and stitching.

An x-ray system component intended to be mounted to the floor, to support and facilitate position of the x-ray tube. The FMT18T allows for synchronized tracking but does not allow for stitching.

An x-ray system component intended to be mounted to the floor and ceiling or floor and wall, to support and facilitate position of the x-ray tube

An x-ray system component intended to be mounted to the floor and wall or floor and ceiling, to support and facilitate position of the x-ray tube.

This a motorized mobile diagnostic x-ray system. The Mobile Direct Radiographic system facilitates x-ray examinations, in situations where it is not feasible to transport the patient to a ward with fixed equipment. The unit is precise, yet easy to maneuver due to smooth battery-powered motorization

The MT500 mobile radiographic table is designed for general purpose radiography and features a table top and rolling base. It has a patient weight limit of 500 lbs.

An x-ray system component intended to be mounted to the ceiling, to support and facilitate position of the x-ray tube. The OTC18M does not allow for synchronized tracking or stitching.

An x-ray system component intended to be mounted to the ceiling, to support and facilitate position of the x-ray tube. The OTC18S allows for synchronized tracking and stitching.

An x-ray system component intended to be mounted to the ceiling, to support and facilitate position of the x-ray tube. The OTC18T allows for synchronized tracking but not stitching.

The RT100 float-top table is designed for general purpose radiography and features a four-way floating table top with longitudinal and transverse travel. It uses electromechanical locks to maintain the desired position. It has a patient weight limit of 700 lbs.

The Straight Arm is an economical and space-efficient X-ray system that can perform a comprehensive range of radiographic procedures.Its flexibility permits imaging of patients sitting or standing, as well as recumbent when optional mobile table is present

The VS100 is a wall-mounted radiographic cassette holder. A wall-mounted radiographic cassette holder is a device that is a support intended to hold and position radiographic cassettes for a radiographic exposure for medical use.

The VS300 is a wall-mounted radiographic cassette holder. A wall-mounted radiographic cassette holder is a device that is a support intended to hold and position radiographic cassettes for a radiographic exposure for medical use.

The VT300 is a wall-mounted radiographic cassette holder. A wall-mounted radiographic cassette holder is a device that is a support intended to hold and position radiographic cassettes for a radiographic exposure for medical use.

The VT300 is a wall-mounted radiographic cassette holder. A wall-mounted radiographic cassette holder is a device that is a support intended to hold and position radiographic cassettes for a radiographic exposure for medical use.

The VT300T is a wall-mounted radiographic cassette holder. A wall-mounted radiographic cassette holder is a device that is a support intended to hold and position radiographic cassettes for a radiographic exposure for medical use.