The Smartlipo Laser is a Nd:YAG laser system. it emits a 1064nm wavelength. Laser emission activation is by foot switch.

The Smartfile medical system is a Nd:YAG laser device for treatment of dental desease. The laser radiation is delivered to the treatment area through the handpieces.

The ASA LASER SH1 device is a medical device for carrying out therapy in the treatment of musculotendinous and joint pathologies with Nd:YAG laser sources.

The Smartxide 50 system consists in a carbon dioxide laser (CO2) with 50W of maximum power. The CO2 laser radiation is delivered to the treatment area through handpieces or a scanning unit (DOT scanner).

The Cynosure Smartskin+ system consists in a carbon dioxide laser (CO2) with 30W of maximum power. The CO2 laser radiation is delivered to the treatment area through an handpiece or a scanning unit.

The smart US-20D system consists in a carbon dioxide laser (CO2) with 25W of maximum power. The CO2 laser radiation is delivered to the treatment area through handpieces or a scanning unit (DOT scanner).

The Smartxide system consists in a carbon dioxide laser (CO2) with 30W of maximum power. The CO2 laser radiation is delivered to the treatment area through handpieces or a scanning unit (DOT scanner).

The ASA LASER HIRO 3.0 device is a medical device for carrying out therapy in the treatment of musculotendinous and joint pathologies with Nd:YAG Laser source.

The Thermaeye Plus is a pulsed light system having a Xenon flashlamp located in the handpieces. It is a light source emitting in the wavelength range 500-1200nm. Emission activation is by footswitch. Overall weight of the system is 16kg, and the size is 22x37x45cm (HxWxD).Electrical requirement is: 115 VAC, 10A, 50-60 Hz, single phase.

The Minisilk-FT is a pulsed light system having a Xenon flashlamp located in the handpieces. It is a light source emitting in the wavelength range 500-1200nm. Emission activation is by footswitch. Overall weight of the system is 16kg, and the size is 22x37x45cm (HxWxD).Electrical requirement is: 115 VAC, 10A, 50-60 Hz, single phase.

The Cynosure SLT II workstation has a solid state Nd:YAG laser capable of emitting laser radiation in three wavelenghts and includes a wide range of different delivery system, handpieces, fibers, cannulas and other accessories.

The ECHOLASER X4 is a medical device equipped with a diode laser source emitting at 1064nm wavelength in CW mode. The laser beam is transmitted via 1 to 4 optical fibres. The operator can use 1 to 4 fibres simultaneously, one independent from the other in both activation and power adjustment. Laser activation is controlled by footswitch.

The ECHOLASER X4 is a medical device equipped with a diode laser source emitting at 1064nm wavelength in CW mode. The laser beam is transmitted via 1 to 2 optical fibres. The operator can use 1 to 2 fibres simultaneously, one independent from the other in both activation and power adjustment. Laser activation is controlled by footswitch.

The ECHOLASER X4 is a medical device equipped with a diode laser source emitting at 1064nm wavelength in CW mode. The laser beam is transmitted via 1 to 2 optical fibres. The operator can use 1 to 2 fibres simultaneously, one independent from the other in both activation and power adjustment. Laser activation is controlled by footswitch.

The SmartXide2 system consists in a 10,600nm carbon dioxide laser (CO2) laser with 80W of maximum power. It can be equipped with an optional diode laser source of 50W maximum power. The laser radiation is delivered to the treatment area through the handpieces or the scanning units. A wide range of handpieces can be provided with the SmartXide² system, having different spot sizes and high performances in specific application field.

The SmartXide2 system consists in a 10,600nm carbon dioxide laser (CO2) laser with 60W of maximum power. It can be equipped with an optional diode laser source of 50W maximum power. The laser radiation is delivered to the treatment area through the handpieces or the scanning units. A wide range of handpieces can be provided with the Smartxide² system, having different spot sizes and high performances in specific application fields.

The DEKA SmartXide² Trio is a medical laser system equipped with a 60W CO2 laser source and an (optional) 980nm or 940nm 50W diode laser source.

The DEKA SmartXide2 Trio is a medical laser system equipped with a 80W CO2 laser source and an (optional) 980nm or 940nm 50W diode laser source.

The IMLIGHT CO2 Laser is a medical laser system equipped with a 40W CO2 laser source delivered through a hollow fiber.

The DEKA SmartXide² system is a medical laser system equipped with a 80W CO2 laser source and an (optional) 980nm or 940nm 50W diode laser source.The CO2 laser radiation has a wavelength of 10600nm and is delivered to the treatment area through an articulated arm and a delivery accessory connected to its distal end.The DEKA SmartXide² CO2 laser can be used with DEKA CO2 scanning units and the DEKA EasySpot Hybrid micromanipulator. The diode laser source can be provided in two alternative wavelengths: 940nm and 980nm.The diode laser radiation is delivered to the treatment area through optical fibers, which are guided to the target tissue with the aid of handpieces.

The DEKA SmartXide² system is a medical laser system equipped with a 80W CO2 laser source and an (optional) 980nm or 940nm 50W diode laser source.The CO2 laser radiation has a wavelength of 10600nm and is delivered to the treatment area through an articulated arm and a delivery accessory connected to its distal end. The DEKA SmartXide 2 CO2 laser can be used with DEKA CO2 scanning units and the DEKA EasySpot Hybrid micromanipulator.The diode laser source can be provided in two alternative wavelengths: 940nm and 980nm.The diode laser radiation is delivered to the treatment area through optical fibers, which are guided to the target tissue with the aid of handpieces.

The SmartXide² system consists in a carbon dioxide laser (CO2) laser with 60W of maximum power. The CO2 laser radiation is delivered to the treatment area through the handpieces or the scanning units. A wide range of handpieces can be provided with the Smartxide² system, having different spot sizes and high performances in specific application field.

The Synchro Repla:y Premium 1.4.2 is a medical laser workstation equipped with an High power Alexandrite 755 nm laser. The system can also be equipped with a pulsed light handpieces.

The Synchro Repla:y Excellium 3.4 is a medical laser workstation equipped with an High power Alexandrite 755 nm laser and an high power Nd:YAG 1064 nm laser. The system can also be equipped with a pulsed light handpieces.

The Synchro Repla:y Excellium HP is a medical laser workstation equipped with an high power Nd:YAG 1064 nm laser. The system can also be equipped with a pulsed light handpieces.

The SmartXide Touch system consists in a carbon dioxide laser (CO2) with 60W of maximum power. The CO2 laser radiation is delivered to the treatment area through the handpieces or the scanning units.

DEKA SmartXide UltraSpeed is a 10,600 nm CO2 laser devices whit a maximum power of 40W.The laser source delivers the laser output through interchangeable laser handpieces.Handpiece activation is by footswitch.

The smartxide Touch system consists in a carbon dioxide laser (CO2) with 60W of maximum power. The CO2 laser radiation is delivered to the treatment area through the handpieces or the scanning units.

The MultiPulse PRO DUO is a medical laser system equipped with a 60W CO2 laser source delivered either through articulated arm or through a hollow fiber.

The MultiPulse PRO 60 is a medical laser system equipped with a 60W CO2 laser source delivered through articulated arm.

The DEKA Motus AX is a medical device equipped with a 755nm solid state laser source.The laser source delivers the laser output through a lens coupled user replaceable optical fiber with a wide range of interchangeable, quick release laser handpieces with electronic spot recognition.Handpiece activation is either by footswitch or fingerswitch.

The DEKA Motus AY is a medical device quipped with a 755nm and 1064nm solid state laser sources. The laser source delivers the laser output through a lens coupled user replaceable optical fiber with a wide range of interchangeable, quick release laser handpieces with electronic spot recognition. Handpiece activation is either by footswitch or fingerswitch.

The TIAC 1 is a medical device that used high frequency RF currents to produce a localized increase in temperature in subcutaneous tissue, for temporary relief of pain and muscle spasm and increase local circulation. The device has integrated massaging handpieces intended to provide a temporary reduction in the appearance of cellulite.

The TIAC II is a medical device that used high frequency RF currents to produce a localized increase in temperature in subcutaneous tissue, for temporary relief of pain and muscle spasm and increase local circulation. The device has integrated massaging handpieces intended to provide a temporary reduction in the appearance of cellulite.

The NEAUVIA CELL is a medical device that used high frequency RF currents to produce a localized increase in temperature in subcutaneous tissue, for temporary relief of pain and muscle spasm and increase local circulation. The device has integrated massaging handpieces intended to provide a temporary reduction in the appearance of cellulite.

The DEKA LUXEA is a versatile medical platform that can be equipped with various types of laser and pulsed light handpieces.Thanks to its universal connector it is possible to quickly insert and deactivate the various handpieces to cover a wide spectrum of application.The available handpieces are:- VIVID: 808±10 nm Laser- SPARKS: 1064nm Laser- PRISMA: 1064nm Q-Switched laser- VIRIDIS: Pulsed Light handpiece 15mmx13mm with integrated 500-1200 nm filter- LILAC: Pulsed Light handpiece 48mmx13mm with interchangeable filters- RUBER: Pulsed Light handpiece 48mmx17mm with integrated 550nm filter- LAZUR: Pulsed Light handpiece 48mmx13mm with integrated 420-950 nm filterEmission activation is either by footswitch or fingerswitch.Electrical specifications are 115-240V~, 50-60Hz, 2300VA max.

The DEKA TRUIST is a versatile medical platform that can be equipped with various types of laser and pulsed light handpieces.Thanks to its universal connector it is possible to quickly insert and deactivate the various handpieces to cover a wide spectrum of application.The available handpieces are:- VIVID: 808±10 nm Laser- SPARKS: 1064nm Laser- PRISMA: 1064nm Q-Switched laser- VIRIDIS: Pulsed Light handpiece 15mmx13mm with integrated 500-1200 nm filter- LILAC: Pulsed Light handpiece 48mmx13mm with interchangeable filters- RUBER: Pulsed Light handpiece 48mmx17mm with integrated 550nm filter- LAZUR: Pulsed Light handpiece 48mmx13mm with integrated 420-950 nm filterEmission activation is either by footswitch or fingerswitch.Electrical specifications are 115-240V~, 50-60Hz, 2300VA max.

The NIRVANA is a diode laser device indicated for hair removal and permanent hair reduction. The device is provided with two different handpieces that deliver the laser energy to the patient.The NIRVANA electrical specifications are: 100-115V~, 50/60Hz, 1600VA.

The Smartxide TETRA system consists in a carbon dioxide laser (CO2) with 30W of maximum power. The CO2 laser radiation is delivered to the treatment area through the handpieces or the scanning units.

The Smartxide Tetra system consists in a carbon dioxide laser (CO2) with 50W of maximum power. The CO2 laser radiation is delivered to the treatment area through the handpieces or the scanning units.

The PHYSIQ is a device provided with 4 handpieces by 2 electrodes each intended to employ EMS (Electrical Muscle Stimulation) and TENS (Transcutaneous Electrical Nerve Stimulation) technologies for various medical applications.

The PHYSIQ is a system provided with 4 IR LED to provide topical heating for the purpose of elevating tissue temperature for temporary relief of muscles.A LED mounted on top of each handpiece is lighted when the handpiece is emitting.

The Elite iQ™ workstation is a dual wavelength system that delivers laser energy in both the Nd:YAG (1064-nm) and Alexandrite (755-nm) wavelengths. Through various spot sizes, fluences and repetition rates, the system offers hair removal treatment and aesthetic treatments across all skin types. An Alexandrite standalone workstation is also available for purchase. The Elite iQ delivers the laser energy through a lens-coupled optical fiber with a wide range of interchangeable, quick-release laser handpieces with electronic spot recognition. The Elite iQ also includes the Skintel® Melanin Reader for objective measurement of the melanin content of skin. The locking casters allow this stand-alone laser system to be secured in place, as well as to be conveniently moved or transported. When not in use, handpiece components and other system components can be stowed in the storage area located in the side drawer. All system connections, such as the foot switch and remote interlock connections, are located on the rear of the laser. This includes all applicable device labels. User-selectable controls and functions are located on the front of the laser. Elite iQ software features include a Windows® operating system, LCD touch screen and a state-of-the-art graphic user interface.

The Elite iQ™ workstation is a dual wavelength system that delivers laser energy in both the Nd:YAG (1064-nm) and Alexandrite (755-nm) wavelengths. Through various spot sizes, fluences and repetition rates, the system offers hair removal treatment and aesthetic treatments across all skin types. An Alexandrite standalone workstation is also available for purchase (M122D1 model). The Elite iQ delivers the laser energy through a lens-coupled optical fiber with a wide range of interchangeable, quick-release laser handpieces with electronic spot recognition. The Elite iQ also includes the Skintel® Melanin Reader for objective measurement of the melanin content of skin. The locking casters allow this stand-alone laser system to be secured in place, as well as to be conveniently moved or transported. When not in use, handpiece components and other system components can be stowed in the storage area located in the side drawer. All system connections, such as the foot switch and remote interlock connections, are located on the rear of the laser. This includes all applicable device labels. User-selectable controls and functions are located on the front of the laser. Elite iQ software features include a Windows® operating system, LCD touch screen and a state-of-the-art graphic user interface.

The DEKA AGAIN PRO family is a medical laser family equipped with Nd:YAG 1064nm laser.The laser sources deliver the laser output through a lens coupled user repleaceable optical fiber with a wider range of intercheangeable, quick release laser handpieces with electronic spot recognition.

The DEKA SmartPerio is a Nd:YAG laser device for soft tissues intraoral treatments. The DEKA SmartPerio system delivers laser through an optical fiber that is guided to the target tissue with the aid of an handpiece and a tip.

The DEKA Motus AZ+ is a medical device equipped with Alexandrite 755nm laser and Nd:YAG 1064nm laser.The laser sources deliver the laser output through a lens coupled user replaceable optical fiber with a wide range of interchangeable, quick release laser handpieces with electronic spot recognition.

The DEKA Motus AZ is a medical device equipped with Alexandrite 755nm laser.The laser sources deliver the laser output through a lens coupled user replaceable optical fiber with a wide range of interchangeable, quick release laser handpieces with electronic spot recognition.

The LipoAI is medical laser equipped with a short pulse 1444 nm Nd:YAG laser source. The device delivers the laser energy through a 600 um optical fiber. The fiber is protected by a small stainless-steel cannula (max. 1.4mm) and is inserted in the tissue through a small aperture in the skin.

The Helix system consists of:• Laser system console (containing the optical bench assembly and laser, the microcontroller control electronics and system software, the high voltage power supply, the laser cooling system, the compressed air-purge system, and the service panel)• LCD control panel with touch-screen technology: the LCD display provides information on the status and settings of the Helix system with touch-screen technology provided to input commands into the system.• Two wavelengths – CO2 and 1570 nm• Articulated arm• Footswitch• Delivery devices (CO2 non-fractional applicators, Scanner CO2/1570nm fractional applicator)