A dental torque wrench for placement and adjustment of dental implants, abutments, abutment screw and prosthetic screws during oral surgery and prosthetic procedures.

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Elos Accurate Hybrid Base is a titanium base designed to interface with a dental implant andto support a patient-specific ceramic superstructure or a multi-unit direct restoration cemented tothe base. The base and the superstructure form a patient-specific abutment that will support adefinitive restoration, either a single crown or a multi-unit restoration. The Elos Accurate HybridBase Engaging is intended for single-unit restorations and Elos Accurate Hybrid Base Nonengagingis intended for multi-unit restorations. Alternatively, a definitive multi-unit restorationmay be cemented directly to the Elos Accurate Hybrid Base.

The Prosthetic Screws provided for the Elos Accurate Hybrid Base are used to secure the final prosthetic restoration to the implant. The Prosthetic Screws have a hexalobular driver connection interface.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Elos Accurate Hybrid Base is a titanium base designed to interface with a dental implant andto support a patient-specific ceramic superstructure or a multi-unit direct restoration cemented tothe base. The base and the superstructure form a patient-specific abutment that will support adefinitive restoration, either a single crown or a multi-unit restoration. The Elos Accurate HybridBase Engaging is intended for single-unit restorations and Elos Accurate Hybrid Base Nonengagingis intended for multi-unit restorations. Alternatively, a definitive multi-unit restorationmay be cemented directly to the Elos Accurate Hybrid Base.

The Prosthetic Screws provided for the Elos Accurate Hybrid Base are used to secure the final prosthetic restoration to the implant. The Prosthetic Screws have a hexalobular driver connection interface.

The product consists of the Prosthetic Screwdriver which is manufactured from stainless steel. The product is available in different lengths. For specific product descriptions, please refer to individual product labels.

The product consists of the Prosthetic Screwdriver which is manufactured from stainless steel. The product is available in different lengths. For specific product descriptions, please refer to individual product labels.

The product consists of the Prosthetic Screwdriver which is manufactured from stainless steel. The product is available in different lengths. For specific product descriptions, please refer to individual product labels.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Glidewell Torque Wrench is made of lightweight titanium and stainless steel. The Torque Wrench & Driver product design, finish and quality make the tool well suited for placement and adjustment of implants, abutments and screws during surgery and other clinical procedures. The Torque Wrench & Driver is easy to prepare for cleaning, disinfection and sterilization. Exchangeable screwdrivers and the Driver make the tool compatible to various implant systems. The driver is available for a variety of connections. For specific product descriptions, please refer to individual product labels.

The Glidewell Torque Wrench is made of lightweight titanium and stainless steel. The Torque Wrench & Driver product design, finish and quality make the tool well suited for placement and adjustment of implants, abutments and screws during surgery and other clinical procedures. The Torque Wrench & Driver is easy to prepare for cleaning, disinfection and sterilization. Exchangeable screwdrivers and the Driver make the tool compatible to various implant systems. The driver is available for a variety of connections. For specific product descriptions, please refer to individual product labels.

The Prosthetic Screws provided for the Elos Accurate Hybrid Base are used to secure the final prosthetic restoration to the implant. The Prosthetic Screws have a hexalobular driver connection interface.

The Prosthetic Screw is provided for a customized abutment to secure the final prosthetic restoration to the implant in the patient’s mouth. The Prosthetic Screws is intended to be used with customized abutment from a Elos Medtech approved milling center. The Prosthetic Screw is provided none-sterile and is intended to be sterilized prior to installation in the patient’s mouth. The Prosthetic Screws are designed for single one-time use in the patient’s mouth.

The Prosthetic Screw is provided for a customized abutment to secure the final prosthetic restoration to the implant in the patient’s mouth. The Prosthetic Screws is intended to be used with customized abutment from a Elos Medtech approved milling center. The Prosthetic Screw is provided none-sterile and is intended to be sterilized prior to installation in the patient’s mouth. The Prosthetic Screws are designed for single one-time use in the patient’s mouth.

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The product consists of the Elos Accurate® Analog for Printed Models (Analog) manufactured in the biocompatible material titanium alloy grade 5 ELI (TiAl6V4 ELI).

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Pre-Milled Blank is used in creation of a customized abutment. It has a pre-manufactured connection interface that fits directly to an endosseous dental implant. The customized shape of the abutment shall be manufactured by either an Elos Medtech approved milling facility or at point of use. The Pre-Milled abutment is delivered non-sterile and the final restoration and corresponding screw is intended to be sterilized at the dental clinic before it is placed in the patient.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.

The Scan Body is used as an accessory for dental scanners in order to locate the exact position of the implants placed in the patient’s jawbone.The Scan Body is intended to be attached to the implant/abutment directly in the patients’ mouth when using an intra-oral scanner.It is manufactured from biocompatible titanium alloy (TiAl6V4 ELI).The Scan Body Driver that is provided separately, is used to fasten the Scan Body to the Implant.