Visit kitHYGITECHReference: HY-03811The VISIT kit is specifically designed for short dental procedures. It contains comprehensive protective clothing for either the surgeon, the assistant or the patient. It is composed of 10 items.More info1 Bouffant cap1 Surgical hat1 Tie-on mask3 Paper hand-towels1 Surgical gown with cotton cuffs1 Pair of overshoes1 Wrapping pape

Duo kitHYGITECHReference: HY-09011The DUO kit is the kit needed for dressing both the surgeon and his assistant. some environment protection is also included, which makes this kit perfect for all kinds of procedures. The kit is composed of 32 items.4 Polyethylene gloves1 surgical drape (29.5"x 29.5"/ 75x75cm)2 Elastic cap handle covers2 Protective sleeves for tubing (3.5"x 47"/ 8x120cm)3 non-latex elastic bands1 Adhesive protective cover for control panel (6.3"x 8.9"/ 16x22cm)1 surgical cap2 Bouffant caps2 tie-on masks2 Pairs of overshoes1 surgical brush with nail cleaner4 Paper hand-towels1 assistant gown with cotton cuffs1 surgical gown with cotton cuffs1 U-shaped surgical drape with adhesive (31.5"x 39"/ 80x100cm)1 Wrapping paper

Hydraulic mayo table with swivelHYGITECHReference: HY-90021The Mayo table is positioned right next to the surgeon and supports the implantology engine. The ideal companion of the practitioner, the Mayo hydraulic table meets two objectives:- Improvement of the firm's organization - Considerable time savingTwo important points that guarantee optimal comfort during surgery

US1 surgery tip compatible MectronHYGITECHReference: HY-98011Bone saw for efficient bone cutting. Used mainly in osteotomy of large sections of bone in maxillofacial surgery

US1L surgery tip compatible MectronHYGITECHReference: HY-98012Curved to the left at 90°, it allows the bone to be cut very efficiently even in hard-to-reach areas. Effective for all osteotomy techniques in the jaw and mandible, especially bone block grafting

US1R surgery tip compatible MectronHYGITECHReference: HY-98013Curved to the right at 90°, it allows the bone to be cut very efficiently even in hard-to-reach areas. Effective for all osteotomy techniques in the jaw and mandible, especially bone block grafting

US2 surgery tip compatible MectronHYGITECHReference: HY-98014Allows to cut the bone with more precision and efficiency, with marked lines, 7-8.5-10mm. Concerns all osteotomy techniques in the jaw and mandible, including crest expansion, corticotomy techniques and bone block grafting

US3 surgery tip compatible MectronHYGITECHReference: HY-98015Flat scalpel for very precise cutting of bone in thinanatomical structures. All high-precisionosteotomy techniques such as crest expansion, interdental corticotomies, non-traumatic nasal spine.

US4 surgery tip compatible MectronHYGITECHReference: HY-98016Circular scalpel for periodontalosteotomy, crown elongation, bone chip harvesting, removal of inflammatory tissue (cysts, etc.).

US5 surgery tip compatible MectronHYGITECHReference: HY-98017 Scalpel with trapezoidal tip for osteoplasty surgeries, especially for remodeling and bone chip collection

UL1 surgery tip compatible MectronHYGITECHReference: HY-98021Indicated in lateral sinus lift techniques, this non-cutting 130° angled spatula separates the membrane in the internal areas

UL2 surgery tip compatible MectronHYGITECHReference: HY-98022Non-cutting tray surgery tip, particularly used for the removal of the Schneider membrane. Used as a 2 mm sinus membrane separator around the bone window

UL3 surgery tip compatible MectronHYGITECHReference: HY-98023Diamond ball surgery tip recommended for lateral sinus lift and/or osteotomy surgery near the nerves. This surgery tip makes it possible to develop an osteotomy or micrometric osteoplasty, in sensitive anatomical regions with minimal trauma

UI7 surgery tip compatible MectronHYGITECHReference: HY-98031Rounded surgery tip with diamond layer for implant bed preparation. Recommended for micrometric (1 mm) osteotomy surgeries, this surgery tip is used in three clinical cases:• To correct the axis of the pilot osteotomy • To complete the preparation of the implant bed • Reaching the sinus by the crestal route • Diameter: 2.4 mm

IM1 surgery tip compatible MectronHYGITECHReference: HY-98032Conical surgery tip with diamond layer for bone perforation. Recommended for initial pilot osteotomy in extraction sites, but also to check the alignment of the axis of IM 1 PIN preparations

IM2P surgery tip compatible MectronHYGITECHReference: HY-98033Surgery tip with marking used during the preparation of the implant bed, especially for bone perforation. Particularly effective in the case of pilot osteotomy in the anterior and posterior (maxillary) region, or optional to check the alignment of the axis of thepreparations 2 PIN 2-2.4Diameter: 2 mm

IM3P surgery tip compatible MectronHYGITECHReference: HY-98034Surgery tip with marking and double irrigation (to avoid overheating in the maxilla). Necessary for the preparation of the implant site and in particular for bone perforation. Used in two concrete clinical applications:• For implant site expansion • To complete the preparation of the implant bedDiameter: 3 mm

EX1 surgery tip compatible MectronHYGITECHReference: HY-98041Flat cutting chisel for extraction. Insert mainly used in root osteoplasty for:• Cut at the level of the ankyloses • Separate the roots

EX2 surgery tip compatible MectronHYGITECHReference: HY-98042Flat cutting chisel bent on the left for extraction. Surgery tip mainly used in root osteoplasty in posterior regions for:• Cut at the level of the ankyloses • Separate the roots

EX3 surgery tip compatible MectronHYGITECHReference: HY-98043Right-angled flat cutting chisel for extraction.Surgery tip mainly used in root osteoplasty in posterior regions for:• Cut at the level of the ankyloses• Separate the roots

V-BS2L surgery tip compatible SatelecHYGITECHReference: HY-98101Bone saw oriented to the left allowing the cutting of cortical ceramic bone. Used primarily to perform vertical or horizontal osteotomy cuts on the patient's right or left mandibleCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

BS2R surgery tip compatible SatelecHYGITECHReference: HY-98102Bone saw oriented to the right, allowing the cutting of cortical ceramic bone. Used mainly to perform vertical or horizontal osteotomy lines on the patient's right or left mandibleCompatible with : Piezotome, Implant Center™

BS4 surgery tip compatible SatelecHYGITECHReference: HY-98103Circular scalpel oriented at 130°, used for osteoplasty and sampling of bone particles or chips: crest osteoplasty, removal of inflammatory tissue (cysts, etc.)Compatible with : Piezotome, Implant Center™

V-BS5 surgery tip compatible SatelecHYGITECHReference: HY-98104 Flat scalpel for the realization of fine osteotomies. All high-precision osteotomy techniques such as: crest expansion, osteotomy line, distraction, approach of the vestibular bone flap in the presence of a thick cortex in sinus surgeryCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

E-BS6 surgery tip compatible SatelecHYGITECHReference: HY-98105Curved scalpel particularly effective for osteoplasty surgeries: especially for remodeling and bone chip collectionCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

SL1 surgery tip compatible SatelecHYGITECHReference: HY-98111Flat diamond surgery tip, mainly used in the following surgical procedures:• Cutting the vestibular bone flap • Sharp angle attenuationCompatible with : Piezotome, Implant Center™

V-SL1 surgery tip compatible SatelecHYGITECHReference: HY-98112Flat diamond surgery tip, mainly used in the following surgical procedures:• Cutting the vestibular bone flap • Sharp angle attenuationCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

SL2 surgery tip compatible SatelecHYGITECHReference: HY-98113Diamond ball tip (1.5m), with laser marking every 2mm. Recommended for:• Smoothing of the edges of the vestibular bone flap • Precision OsteoplastyCompatible with : Piezotome, Implant Center™

V-SL2 surgery tip compatible SatelecHYGITECHReference: HY-98114Diamond ball tip (1.5m), with laser marking every 2mm. Recommended surgery tip for:• Smoothing of the edges of the vestibular bone flap • Precision OsteoplastyCompatible avec : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

V-SL4 surgery tip compatible SatelecHYGITECHReference: HY-98115Indicated in sinus lift techniques, this 90° angled non-cutting spatula allows the sinus membrane to be lifted deep inside the sinus.Diameter of the spatula: 4mmCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

V-SL5 surgery tip compatible SatelecHYGITECHReference: HY-98116Non-cutting spatula bent at 135° allowing the sinus membrane to detach in depth inside the sinus and to clear anatomical structures.Diameter of the spatula: 4mmCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

LC1 surgery tip compatible SatelecHYGITECHReference: HY-98121Flat cutting chisel for extraction. Surgery tip mainly used in root osteoplasty. It allows to penetrate deeply and with caution along the alveolar ligament (desmodontium), between the bone and the alveolar rootLength: 9 mmCompatible with : Piezotome, Implant Center™

V-LC1 surgery tip compatible SatelecHYGITECHReference: HY-98122Flat cutting chisel for extraction. Surgery tip mainly used in root osteoplasty. It allows to penetrate deeply and with caution along the alveolar ligament (desmodontium), between the bone and the alveolar rootLength: 9 mmCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

V-LC2 surgery tip compatible SatelecHYGITECHReference: HY-98123Very fine flat cutting chisel for extraction. Used for root osteoplasty, it is used in addition to the LC1 surgery tip, in order to reach hard-to-reach areas (e. g. restricted spaces between the root and the alveolar bone) without risk of damaging the bone cortexLength: 10 mm

V-LCL2 surgery tip compatible SatelecHYGITECHReference: HY-98124Very fine flat cutting chisel, 45° to the left. Used for root osteoplasty, it facilitates access to posterior areas and confined spaces. Its fineness allows it to elaborate a delicate work without risk of degrading the bone table. This surgery tip offers the surgeon precision and comfort in sites with reduced visibilityLength: 10 mm

V-LC2R surgery tip compatible SatelecHYGITECHReference: HY-98125Very fine flat cutting chisel, 45° to the right. Used for root osteoplasty, it facilitates access to posterior areas and confined spaces. Its fineness allows it to elaborate a delicate work without risk of degrading the bone table. This surgery tip offers the surgeon precision and comfort in sites with reduced visibilityLength: 10 mm

V-PIRAHNA surgery tip compatible SatelecHYGITECHReference: HY-98126Double sharpening saw allowing to act both on the depth and on the cutting thickness. Particularly effective for root hemisections and amputations, it is also used to cut the molars included during their extractionLength: 9 mmCompatible with : Piezotome Solo (LED), Piezotome 2, Implant Center™ 2

E-BS2L surgery tip compatible with EMSHYGITECHReference: HY-98201Bone saw oriented to the left, allowing the cutting of cortical ceramic bone. Used primarily to perform vertical or horizontal osteotomy cuts on the patient's right or left mandible

E-BS2R surgery tip compatible with EMSHYGITECHReference: HY-98202Right-directed bone saw, allowing the cutting of cortical ceramic bone. Used mainly to perform vertical or horizontal osteotomy lines on the patient's right or left mandible

E-BS4 surgery tip compatible EMSHYGITECHReference: HY-98203Circular scalpel oriented at 130°, used for osteoplasty and sampling of bone particles or chips: crest osteoplasty, removal of inflammatory tissue (cysts, etc.)

E-BS5 surgery tip compatible with EMSHYGITECHReference: HY-98204Flat scalpel, for the realization of fine osteotomies. All high-precision osteotomy techniques such as: crest expansion, osteotomy line, distraction, approach of the vestibular bone flap in the presence of a thick cortex in sinus surgery

E-BS6 surgery tip compatible EMSHYGITECHReference: HY-98205Curved scalpel particularly effective for osteoplasty surgeries: especially for remodeling and bone chip collection

E-SL1 surgery tip compatible EMSHYGITECHReference: HY-98211Flat diamond insert used mainly in the following surgical procedures:• Cutting the vestibular bone flap• Sharp angle attenuation

E-SL2 surgery tip compatible EMSHYGITECHReference: HY-98212Diamond ball surgery tip (1.5m), with laser marking every 2mm. Recommended insert for:• Smoothing of the edges of the vestibular bone flap • Precision osteoplasty

E-SL4 surgery tip compatible EMSHYGITECHReference: HY-98213Indicated in sinus elevation techniques, this non-cutting 90° angled spatula allows the sinus membrane to be lifted deep inside the sinusDiameter of the spatula: 4mm

E-SL5 surgery tip compatible EMSHYGITECHReference: HY-98214 Non-cutting spatula bent at 135° allowing the sinus membrane to detach in depth inside the sinus and to clear anatomical structuresDiameter of the spatula: 4mm

E-LC1 surgery tip compatible with EMSHYGITECHReference: HY-98221Flat cutting chisel for extraction. Insert mainly used in root osteoplasty. It allows to penetrate deeply and with caution along the alveolar ligament (desmodontium), between the bone and the alveolar rootLength: 9 mm

E-LC2 surgery tip compatible with EMSHYGITECHReference: HY-98222Very fine flat cutting chisel for extraction. Used for root osteoplasty, it is used in addition to the LC1 surgery tip, in order to reach hard-to-reach areas (e. g. restricted spaces between the root and the alveolar bone) without risk of damaging the bone cortex.Length: 10 mm

E-LC2R surgery tip compatible EMSHYGITECHReference: HY-98223Very fine flat cutting chisel, 45° to the right. Used for root osteoplasty, it facilitates access to posterior areas and confined spaces. Its fineness allows it to elaborate a delicate work without risk of degrading the bone table. This surgery tip offers the surgeon precision and comfort in sites with reduced visibility

E-PIRAHNA surgery tip compatible EMSHYGITECHReference: HY-98224Double sharpening saw, allowing to act both on the depth and on the cutting thickness. Particularly effective for root hemisections and amputations, it is also used to cut the molars included during their extraction