Lockdown Loop Tensioner - Single Use

Lockdown Angled Introducer for use on left shoulder - single use

Lockdown Angled Intrducer for use on right shoulder - single use

Left Shoulder Single Use Instrument Pack

Right Shoulder Single Use Instrument Kit

Lockdown 5cm Acromiaclavicular (AC) Device

Lockdown 6cm Acromiaclavicular (AC) Device

Lockdown 7cm Acromiaclavicular (AC) Device

Lockdown 8cm Acromiaclavicular (AC) Device

Lockdown 9cm Acromiaclavicular (AC) Device

Lockdown 10cm Acromiaclavicular (AC) Device

Lockdown 11cm Acromiaclavicular (AC) Device

Lockdown 12cm Acromiaclavicular (AC) Device

Lockdown 13cm Acromiaclavicular (AC) Device

Lockdown 14cm Acromiaclavicular (AC) Device

Lockdown 15cm Acromiaclavicular (AC) Device

Lockdown 16cm Acromiaclavicular (AC) Device

Lockdown 17cm Acromiaclavicular (AC) Device

Lockdown 18cm Acromiaclavicular (AC) Device

Lockdown 19cm Acromiaclavicular (AC) Device

Lockdown 20cm Acromiaclavicular (AC) Device

9mm Washer

Lockdown AO Drill 2.5mm diameter (Sterile)

Lockdown AO Cortical Tap 3.5mm diameter (Sterile)

LockDown Acromioclavicular (AC) Length Gauge

14mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

16mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

18mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

20mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

22mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

24mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

26mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

28mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

30mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

32mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

34mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

36mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

38mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

40mm Cortical Screw (3.5mm Dia) & 1mm Washer (SS)

AO SCREWDRIVER SHAFT Ø2.5MM (HEX). THE FINISHED PART NUMBER IS IN629/1 - "AO SCREWDRIVER SHAFT Ø2.5MM (HEX) - RM04051"

DRILL SLEEVE Ø2.5mm & TAP SLEEVE Ø3.5mm. THE FINISHED PART NUMBER IS IN631/1 - "DRILL SLEEVE Ø2.5mm & TAP SLEEVE Ø3.5mm - RM04053"

LOCKDOWN (LSSS) SURGICAL TRAY BASE WHICH HOUSES ALL INSTRUMENTS REQUIRED FOR THE LOCKDOWN SHOULDER STABILISATION PROCEDURE. tHIS TRAY ALSO HAS A LID (DI NO#: 05060433600920) ASSOCIATED WITH IT THAT LOCKS INTO PLACE. TRAY BASE SUPPLIED BY RUDISCHHAUSER.

Lockdown (LSSS) Surgical Instrument Metal Tray Lid. This Tray lid attaches to the Lockdown Tray base (DI NO#: 05060433600845). This lid is supplied by Rudischhauser.

AO CANNULATED SILICONE SCREWDRIVER HANDLE WITH QUICK COUPLING. THE "AO SCREWDRIVER SPINNER" - DI NO# (05060433600883) SCREWS ONTO THE END OF THIS DEVICE. THIS CREATES THE FINAL INSTRUMENT IN630/1 - "AO CANNULATED HANDLE WITH QUICK COUPLING AND SPINNER - AS01068"

AO SCREWDRIVER SPINNER (THIS PART FITS ONTO THE BOTTOM END OF "AO CANULATED SILICONE SCREWDRIVER HANDLE WITH QUICK COUPLING, RM06006 - PRIMARY DI NO# (0506433600876)". THIS INSTRUMENT PART ALONG WITH "AO CANULATED SILICONE SCREWDRIVER HANDLE WITH QUICK COUPLING" MAKEUP INSTRUMENT IN630/1 - "AO CANNULATED HANDLE WITH QUICK COUPLING AND SPINNER - AS01068"

DEPTH GAUGE OUTER BODY TUBE. THIS TUBE HOUSES THE "DEPTH GAUGE INNER BODY WITH BALL & SPRING - RM06009 (DI NO# 05060433600913)" AND HAS A CAP THAT FITS ONTO THE END OF IT CALLED "DEPTH GAUGE OUTER BODY CAP - RM06010 (05060433600890)". THIS CREATES THE FINAL INSTRUMENT IN626/1 - "DEPTH GAUGE ASSEMBLY - AS01069"

DEPTH GAUGE INNER BODY WITH BALL & SPRING. THIS INNER TUBE HAS MARKINGS ON IT. IT SITS INSIDE THE "DEPTH GAUGE OUTER BODY TUBE - RM06008 (DI NO# 05060433906)". THIS CREATES THE FINAL INSTRUMENT IN626/1 - "DEPTH GAUGE ASSEMBLY - AS01069"

DEPTH GAUGE OUTER BODY CAP. THIS CAP SCREWS ONTO "DEPTH GAUGE OUTER BODY TUBE - RM06008 (DI NO# 05060433600906)" AND ENCLOSES "DEPTH GAUGE INNER BODY WITH BALL & SPRING - RM06009 (DI NO# 05060433600913)". THIS CREATES THE FINAL INSTRUMENT IN626/1 - "DEPTH GAUGE ASSEMBLY- AS01069 "