The Tilt Cantilever Armrest Assembly for Endomorph Canes are Height and Angle Adjustable and mount onto the tilt back canes on a Motion Concepts power positioning system configured with Tilt. Armrest configurations available in Left, Right or Sets. The cantilever armrests can be rotated backwards to provide clearance for side transfers. Armrests available with straight tubes or 4" drop tubes (with a 4" downward offset in the armrest tube).

Cane Mounted Cantilever Armrests are attached to the wheelchair recline back canes (upper and lower mounting points) . Cantilever armrests can be rotated/flipped backwards to provide clearance for side transfers. Armrests are height and angle adjustable. (3 height ranges available: 9.5"-12", 10"-13", 13"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

Individual 6" Curved Calf Pads (Set) for use with various Motion Concepts independent legrests. Fabric covered foam pad. One-size. Mounting hardware included.

Optional Maxx Floating CM, Flip-Up Platform Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy). Floating Legrest Assembly is available with a Basic CM Foot Platform, or Standard Flip-Up Foot Platform (standard platform sold separately). Wheelchair component for use with Motion Concepts Power Positioning Systems

Waterfall Arm Pads (Highly durable skinned polyurethane resists cracking and peeling and provides extra comfort and protection for arms). Waterfall Arm Pads are available in Desk length 10" or Full length 14". Mounting hardware included. Depth adjustable Optional wheelchair component for use with Motion Concepts power positioning systems

The Dual Post Armrest (lower) Assembly mounts to the seat side rail of the Motion Concepts power positioning system configured with a Tilt function. The Dual Post armrest can be rotated backwards to provide clearance for side transfers. Dual Post Armrests are available in 2 adjustable height ranges: 9"-13", 12"-15", Left and Right Armrest configurations are available.

Ergonomic Arm Trough and Hand Pad Kit (Kit includes molded, skinned polyurethane arm trough designed to fit the natural arm curvature, together with a skinned polyurethane flat hand pad). Left and Right Kit configurations available.. Mounting hardware included. Depth and width adjustable. (The Flat Hand Pad and Arm Ergonomic Arm Trough are also available (sold) separately).

Ergonomic Arm Trough (Molded, skinned polyurethane arm pad designed to fit the natural arm curvature; elbow cut-out allows for various arm positions)Left and right arm trough configurations available.. Mounting hardware included. Depth and width adjustable. Optional Flat Hand Pad available (sold separately).

Fixed Power Down (Telescoping) Center Mount Legrest (Upper Assy). Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning systems.

Individual Flat Calf Pads (Set) for use with various Motion Concepts Legrests (individual or centre mount). Fabric covered foam pad. Available in a wide range of pad sizes.

Standard Flip-Up Foot Platform assembly including heel strap. The Standard flip-up foot platform is designed for use with Motion Concepts CM Legrests. Foot Platform sizes available in six sizes (XS, SM, MD, LG XL, XXL); Heel straps available in 1" or 2" heights.

Flat Hand Pad. (Molded, skinned polyurethane hand pad designed for use in combination with the Ergonomic Arm Trough (sold separately)). The Flat Hand Pad is compatible with Left or Right Arm Troughs. Mounting hardware is included.

Gel Arm Pads. (Fabric covered polymer gel arm pads provide extra protection for highly sensitive arms). Available in 3 models: Standard Narrow: 2" x 12"; Standard Wide: 3.5" x 12"; and Long Wide: 3.5" x 14". Mounting hardware included. Depth adjustable. Optional wheelchair component for use with Motion Concepts power positioning systems.

Optional Rubber Coated Footplate Heel Cups for use with MC Individual Footplate Assemblies. (Mounting hardware included)

Heavy-Duty 70° Swing Away Legrest Upper Assy. Upper downtube assembly only. Standard and Short Knee-to-Heel options available. Universal Left and Right. Wheelchair component designed for use with Motion Concepts power positioning systems.

Footplate Heel Loops designed for use with MC Individual Footplate Assemblies (Standard and Cut-Out models). Heel Loops are available in 14" or 16" lengths and 1" or 2" heights

Optional Basic (Rubber Coated) Foot Platform Mount designed for use with Motion Concepts CM Legrests. The Basic Footplate is available in a narrow or wide option.

Extension Tube Assembly for use with Motion Concepts Independent Legrests (Pivot Plus Legrest or HD 70 Swing-Away Legrest) . Available in 4 tube lengths: 9.4", 11.4", 14.4" or 17.4" . (Note: 17.4" extension tube not available for use with HD 70 Swing Away Legrests).

Pivot Mount Assembly for use with Motion Concepts Independent Legrests (Pivot Plus Legrest or HD 70 Swing-Away Legrest). Left and Right configurations available. Available in 3 sizes/types : Standard, Bariatric, Low KTH.

Upper LNX Power Center Mount Legrest Assembly. Optional knee-to-heel (KTH) lengths available (standard, short and mini configurations). Assembly includes actuator motor. Wheelchair component designed for use with Motion Concepts power positioning systems.

Upper Floating Center Mount Legrest Assembly. Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning systems.

Optional Plantar Flex LNX, Flip-Up Platform Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy). Available in 2 Knee-to-Heel Ranges. Foot platform sold separately. Wheelchair component for use with Motion Concepts Power Positioning Systems

Optional CM Legrest, Power Flip-Up Foot Platform Mount (Lower Assembly) installs onto the LNX Power Center Mount Legrest (Upper Assy) or the Fixed CM Legrest (Upper Assy). Includes actuator motor. Foot platform sold separately. Wheelchair component for use with Motion Concepts Power Positioning Systems

Upper LNX Power Down (Telescoping) Center Mount Legrest Assembly. Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning systems.

The Latitude Style Foot Platform assembly is designed for use with Motion Concepts Power Elevating Calf Panel. The latitude-style foot platform is available with an optional padded foam cover (in standard black Polyester fabric or Onyx (faux-vinyl) fabric), or may be order without a pad.

Maxx-Style Cane Mounted Cantilever Armrests are attached to the wheelchair recline back canes (upper and lower mounting points). Cantilever armrests can be rotated/flipped backwards to provide clearance for side transfers. Armrests are height and angle adjustable. (2 height ranges available: 9.5"-13", 12.5"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

Individual (moulded i-skin) Calf Pads (Set) for use with Motion Concepts CM Legrests. One-size only. Mounting hardware included.

Maxx Power Pivot Plus Legrest Upper Assy (with Calf Pad). Upper downtube assembly only (includes legrest actuator). Left and Right configurations available. Wheelchair component designed for use with Motion Concepts power positioning systems.

Multi Position Flat Arm Pads (Highly durable skinned polyurethane resists cracking and peeling and provides extra comfort and protection for arms)Flat Arm Pads are available in Desk length 10" or Full length 14". Mounting hardware included. Depth and width adjustable Optional wheelchair component for use with Motion Concepts power positioning systems.

Maxx Fixed Center Mount (FCM) Legrest (Upper) Assembly. (Non-Elevating/Non-Articulating). Wheelchair component designed for use with Motion Concepts power positioning systems.

Maxx Manual Pivot Plus Legrest Upper Assy (with Calf Pad). Upper downtube assembly only. Left and Right configurations available. Wheelchair component designed for use with Motion Concepts power positioning systems.

Optional Manual Transfer Arm Assembly. Installs on the the side rails of the Motion Concepts Power Positioning System. (Weight capacity = 175 lb.) Must be raised and lowered manually. Available for left or right side mounting.

Outback Recline (2-point) Armrest Assembly attaches to the recline back cane and seat side frame. Outback design allows armrest to flip outward and backwards to provide maximum clearance for side transfers. Height Adjustable. Two height ranges available (9"-13" or 13"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

The Dual Post Outback Tilt Armrest (lower) Assembly mounts to the seat side rail of the Motion Concepts power positioning system configured with a Tilt function. The outback design allows the armrest to rotate outward and backwards to provide maximum clearance for side transfers. (The Upper Dual Post Armrest Tube Assy is sold separately). Left and Right Armrest configurations are available.

Outback Recline Cantilever Armrest Assembly attaches to the recline back cane. Outback design allows armrest to flip outward and backwards to provide maximum clearance for side transfers. Armrest is height and angle adjustable. Two height ranges available (7"-9" and 9"-12.5"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

The Outback Tilt Cantilever Height and Angle Adjustable Armrest Assembly mounts to the tilt back canes on a Motion Concepts power positioning system configured with Tilt. The outback design allows the armrest to rotate outward and backwards to provide maximum clearance for side transfers. (Armrest is available in 3 adjustable height ranges: 7"-9", 9"-12", 12"-15").

One-Piece Malleable (i-skin) Calf Panel for use with Motion Concepts CM Legrests. (Bendable/shape-able integral skin foam pad). One-Size only

Stander Outback Drop Cantilever Armrests (set) are attached to the recline back canes on the Motion Concepts Modular Power Standing Systems (MPSS). The outback design allows armrest to flip outward and backwards to provide maximum clearance for side transfers. Armrest is height and angle adjustable. Drop armrest is designed with a 4" downward offset in the armrest tube.

One-Piece Flat Calf Panel Mount Assy designed for use with Motion Concepts CM Legrests (includes mounting hardware). One-Piece Calf Pad sold separately. Available in a variety of widths and heights to accommodate different user needs.

One-Piece Flat Calf Panel Pad use with Motion Concepts CM Legrests. (HR PU foam pad with black polyester fabric cover). Available in a variety of widths and heights to accommodate different user needs. Installs onto the corresponding sized One-Piece Calf Panel Assy.

The Pediatric Dual Post Armrest Assembly mounts to the seat side rail of the Motion Concepts power positioning system configured with a Tilt function. The Dual Post armrest can be rotated backwards to provide clearance for side transfers. Pediatric Dual Post Armrests are available in 2 adjustable height ranges: 6.75"-9", 8.5"-18.5", Left and Right Armrest configurations are available.

Maxx Power Elevating/Articulating Calf Panel (Upper) Assembly. Optional Elevating Calf Panel (includes foam pad), may be used on its own, or in combination with the Power Down Foot Platform. Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning systems.

Optional Power Down Foot Platform Module (Lower Assy) designed for use wit the Power Elevating Calf Panel Assy. (Foot Platform sold separately). Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning systems.

Power Elevating Calf Panel Assy with optional Latitude Foot Platform. Optional Elevating Calf Panel Assy is available with or without a foot platform. (Optional Foot Platform Foam Pad available in Onyx (faux vinyl fabric), or standard polyester fabric. Assembly includes actuator motor. Optional wheelchair component designed for use with Motion Concepts power positioning systems.

Optional Power Transfer Arm Assembly. Installs on the the side rails of the Motion Concepts Power Positioning System. (Weight capacity = 175 lb.) Includes actuator motor. Available for left or right side mounting.

Recline (2-point) Adjustable Height Armrest Assembly attaches to the recline back cane and seat side frame. The Recline Armrest is designed to flip backward to provide clearance for side transfers. Two height ranges available (9"-13" or 13"-16"). Left and Right armrest configurations available. Optional wheelchair component for use with Motion Concepts power positioning systems

Recline (2-point) Body Fit Adjustable Height Armrest Assembly attach to the recline back cane and seat side frame. The Recline Armrest is designed to flip backward to provide clearance for side transfers. The Body Fit bracket design allows for 2" or 4" offset for an enlarged seating area. Two height ranges are available (9.5"-13" or 12.5"-16"). Left and Right armrest configurations available in either 2" and 4" offset.

The Rail Mounted Tilt Cantilever Armrest Assy is Height Adjustable and mounts onto the seat frame side rails on a Motion Concepts power positioning system. Armrest configurations available in Left, Right or Sets. The armrests can be rotated backwards to provide clearance for side transfers. The rail mounted armrests are available in 2 height ranges: 9"-12.5" and 11"-14".

Stander Cane Mounted Cantilever Armrests (Set) are attached to the recline back canes on the Motion Concepts Modular Power Standing Systems (MPSS). Cantilever armrests can be rotated/flipped backwards to provide clearance for side transfers. Armrests are height and angle adjustable.

Optional adjustable Footplate Toe Straps (Set) for use with MC Individual Footplate Assemblies. Toe Straps are available in three lengths: 6.5", 8.5 and 10.5".