The implantable device Elite SPK is intended for the attachment of soft tissue to bone during arthroscopic or open treatment of rotator cuff tears. The implant device is packaged with previously cleared sutures, in their final sterilized form

GT TUNNELER is a sterile, single-use device used in standard shoulder arthroscopy procedures.

GT TUNNELER device and non-adsorbable sutures.

The GATEWAY is a 2.4 GHz wireless receiver that communicates with the WISE inertial sensor.

Complete set of surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

Surgical instrument to be used with Superelastic Transosseous Needle (STN).

The Showmotion LOWER 6 kit includes 6 WISE sensors, a GATEWAY receiver, elastic bands and a charger.The platform allows to carry out the kinematic analysis of the movement of the lower district.

The Showmotion LOWER 8 kit includes 8 WISE sensors, a GATEWAY receiver, elastic bands and a charger.The platform allows to carry out the kinematic analysis of the movement of the lower district.

The Showmotion SPINE 2 kit includes 2 WISE sensors, a GATEWAY receiver, elastic bands and a charger. The platform allows to carry out the kinematic analysis of the movement of the spine.

The Showmotion SPINE 3 kit includes 3 WISE sensors, a GATEWAY receiver, elastic bands and a charger. The platform allows to carry out the kinematic analysis of the movement of the spine and the head.

Showmotion software can be used to control motion sensors hardware in order to track kinematics of upper/lower body by means of specific biomechanical protocols. Showmotion software can also be used as a stand-alone system when opening a subject's database, playing back previously recorded analyses, and when generating specific reports or comparison analyses. In this configuration there is no need to connect with the hardware sensors.

The Showmotion TOTAL 12 kit includes 12 WISE sensors, a GATEWAY receiver, elastic bands and a charger. The platform allows to carry out the kinematic analysis of the movement of the total body.

The Showmotion UPPER 5 kit includes 5 WISE sensors, a GATEWAY receiver, elastic bands and a charger.The platform allows to carry out the kinematic analysis of the movement of the upper district.

The Showmotion UPPER 7 kit includes 7 WISE sensors, a GATEWAY receiver, elastic bands and a charger.The platform allows to carry out the kinematic analysis of the movement of the upper district.

Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.

Optionally, the electrostimulator (SPM01M1) can require the combined use with the MySPM@Home mobile application, as accessory of the Subject device. It allows to monitor the user and guide rehabilitation and training through specific protocols.

For the stand-alone mode version of the subject device, the SPM01K1 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes, and protective skin.

For the wireless mode version of the subject device, to be used in combination with a dedicated control software running on a pc/laptop, the content of the SPM01K2 convenience kit is: 1 electrostimulator SPM01M2 configuration; electrodes, and protective skin.

For the wireless mode version of the subject device, to be used in combination with an application installed on a tablet, the SPM01K3 convenience kit includes: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM mobile application (SPM01A1).

For the wireless mode version of the subject device, combined with an application installed on a tablet that can be used in a home environment, the content of the SPM01K4 convenience kit is: 1 electrostimulator SPM01M1 configuration; electrodes; protective skin, and 1 tablet with the MySPM@Home mobile application (SPM01A2).

The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it.The SPM01M1 configuration supports Bluetooth Low Energy communication. In this case it can connect directly to a smartphone/tablet on which a dedicated app is installed. The dedicated control software is supplied via an usb receiver and must be used by a properly trained healthcare professional.

The configuration is composed of an electrostimulator and other components, useful for recharging, wearing, stimulating and/or controlling it. The SPM01M2 configuration supports IEEE 802.15.4 radio interface. In this case it provides for the exchange of data between the stimulator and a receiver connected to the PC, which then collects the data sent by the device and synchronizes the transmission. The dedicated control software is supplied via an usb receiver.

The WISE is a magnetic and inertial unit including 3D accelerometers, gyroscopes and magnetometers.