The pack contains five radel K-FIX® ergonomically profiled pin protectors that has three main functions in foot surgery for protruding wires.It protects patients and/or hospital staff from wire sharp ends.It prevents any inward pin migration as well as reducing bandage size.It allows easy removal of the wire by the surgeon.Its fixation requires no instrument. The protector ball is introduced until firm locking on the wire extremity previously bent.

The container is used in the transport and the sterilization of the QWIX® associated instruments. It includes one combined base with reference 119941ND and one lid with reference 996200ND.The transport and sterilization containers are not intended to maintain sterility.

The 7.5mm screw rack is part of the set with reference 121960ND used in the transport and the sterilization of the LARGE QWIX® 5.5mm and 7.5mm screw associated instruments and non sterile implants. It is composed of one rack and one washer rack lid with reference 119976ND.The transport and sterilization containers are not intended to maintain sterility.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

The BOLD SCREW is a cannulated compression screw made of titanium alloy. Its design includes a long non-threaded shaft, allowing optimal compression, and a self-tapping screw tip. These features enable its use in small bone fixation and its specific design allows its use in the foot.

"AO ""2 in 1"" cannulated drill dia. 2.2/3.0mm L.22mm"

The sterile '2 in 1' shouldered drill, with a 4.5mm diameter A-O attachment and a total length of 90mm, a five lip 3mm diameter countersink, is designed to drill in one single drive the body of the the 3.0 & 3.7mm screws and the shape of the screw heads to allow complete countersink.

The cover is part of the of the base with reference 159980ND used in the transport and the sterilization of the non sterile implants.

The silicone carpet is part of the complete container with reference 159990ND used in the transport and the sterilization of the associated instruments and non sterile implants.

The cover is part of the base with reference 159980ND used in the transport and the sterilization of the non sterile implants.

The trial plate radel module is part of the tray with reference 169101ND used in the transport and the sterilization of the ADVANSYS® TTC associated instruments. It is composed of one module and six silicone bumpers to securely maintain the devices.The transport and sterilization containers are not intended to maintain sterility.

The radel midfoot trial plate module is part of the container with reference 169102ND used in the transport and the sterilization of the associated instruments. It is composed of one module and three silicone bumpers to securely maintain the devices.The transport and sterilization containers are not intended to maintain sterility.

Titanium alloy sterile washer belonging to the Newdeal locking system fixation. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Titanium alloy sterile washer belonging to the Newdeal locking system fixation. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Titanium alloy sterile variable angle washer belonging to the Newdeal angular locking system fixation. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Titanium alloy sterile variable angle washer belonging to the Newdeal angular locking system fixation. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal non sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal non sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal non sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

Stainless steel Newdeal sterile locking system fixation consists of screws and washers. This system is available in different sizes. The osteosynthesis screws are fixed to the bone through the plate holes, creating a single implant/screw unit. The system is locked by means of washers drilled into the threaded lipped sockets at the top of each hole, thus blocking each screw head.

The Advansys Hindfoot Complete set includes TTC plates, screws for fixation, and instruments to be used as a guide for the implants, including K-wire. The TTC Plates are intended for arthrodesis of the ankle joint and distal tibia, fractures, osteotomies, fusions and replantation of small bones in the foot and ankle.

The Advansys Midfoof Complete set includes Lisfranc plates, Lapidus plates, screws, and instruments used to guide the implants, including K-wire. The Lisfranc Plate consists of an osteosynthesis plate designed to bridge the tarsometatarsal joints. It is available in different sizes and is implanted using the locking system fixation screws and washers. Lisfranc Plates are intended for fractures, fusions, osteotomies and replantation of small bones at the tarsometatarsal joints. The Lapidus Plate consists of an osteosynthesis plate designed to bridge the first tarometatarsal joint.

In case of severe deformities of the forefoot, the basal osteotomy may be preferable to the distal osteotomy as it promotes a greater degree of correction. Due to the leverage effect, the osteotomy site is subject to significant dorsiflexion stress. The B-BOP plate is specifically designed for basal osteotomy of the first metatarsal, with strong stability. The set includes the B-BOP plates, screws, and instruments, including K-wire.

Full Calcanea Plate Instrument and Implant Set

The principal of the FOREFOOT sets is to propose a group of implants (screws and staples) and the associated instruments in a single package dedicated to the forefoot orthopaedic surgery. The set is intended to make easy the surgeon work and give more solution in the same set. The Forefoot Set includes Bold compression screws, QWIX fixation screws, Spin snap-off screws, Solustaple, Uni-clip staples, and instrumentation.

The Hallu-Fix set includes Hallu-Fix S Plates, Hallu-Fix C Plates, screws, and instruments. The Hallu Plates are low profile titanium plates dedicated to first metatarsophalangeal arthrodesis. The system is intended to be implanted for fixation of fractures, osteotomies or arthrodesis of the first metatarsophalangeal joint.

The Hallu-Lock plate system is a low profile titanium plate dedicated to the first metatarsophalangeal arthrodesis. This system includes Hallu-Lock C plates, Hallu-Lock S plates, screws, and instruments. The system is intended to be implanted for fixation of fractures, osteotomies or arthrodesis of the first metatarsophalangeal joint.

The I.CO.S Screw is a cannulated compression screw with non-threaded shaft, allowing optimal compression. The head of this screw can be screwed and translated along the body in order to increase the compression controlled by the surgeon. It also has a self-tapping screw tip. The I.CO.S screw is indicated for fixing the elective osteotomies of the forefoot and/or mid foot bones and for fractures fixation. This set includes I.CO.S screws that are 4mm in diameter. Instruments are also provided.

The I.CO.S Screw is a cannulated compression screw with non-threaded shaft, allowing optimal compression. The head of this screw can be screwed and translated along the body in order to increase the compression controlled by the surgeon. It also has a self-tapping screw tip. The I.CO.S screw is indicated for fixing the elective osteotomies of the forefoot and/or mid foot bones and for fractures fixation. This set includes I.CO.S screws that are 6mm in diameter. Instruments are also provided.

The IPP-ON set includes instruments to be used as a guide for Interphalangeal implants. The interphalangeal implant is designed to respect anatomical flexion to achieve fixation of interphalangeal arthrodesis of the lesser toes in case of rigid or semi-rigid hammertoe deformity, revision of failed arthroplasty or arthrodesis, and shortening due to length excess of the second toe.

The Large Uni-Clip Staple is a staple so that, by widening the diamond shaped opening, mechanical deformation leads to narrowing of the interaxis of the two legs. The surgeon can obtain a true compression, adjustable and controlled with many choice of size. The Large Uni-Clip Staple is indicated for fixation of bone fractures or for bone reconstruction. The set includes the staples and instruments.

The PANTA nail set inclides instrumentation wich are used as a guide for the implantation of PANTA Nail system.The PANTA ankle nail is a straight, cannulated intramedullary nail.

The PANTA XL nail set inclides instrumentation wich are used as a guide for the implantation of PANTA XL Nail system.The PANTA XL ankle nail is a straight, cannulated intramedullary nail.

The QWIX positioning and fixation screw are designed to provide speed and precision for challenging surgical situations. They are indicated for fixation of bone fractures or for bone reconstructions. QWIX 3.0 and 4.3 are designed with self-drilling flutes. The compression screw has a non-threaded shaft and a self-tapping screw tip. Instruments are also provided.

The Large QWIX positioning and fixation screws were designed for extremity fixation, to provide speed and precision for challenging surgical situations. The QWIX screw is a cannulated, fully threaded screw with a self-tapping screw tip. Instruments are also provided.

The complete PANTA removal set includes instruments to be used for the removal of all PANTA nail system.

The TIBIAXYS System consists of bone plates and screws for arthrodesis, osteotomies and fractures of ankle joint, distal tibia and fibula. The system is indicated for fixation of bone fractures or bone reconstruction. Instruments are provided for guidance of implants.

The UNI-CP system includes compression plates, screws, and instruments.The compression plate is indicated for fixation of bone fractures or bone reconstruction. By widening the “eye” on the interaxis of the plate, mechanical deformation leads to narrowing of the interaxis of the two legs and thus provides compression between the two bone fragments to fuse. The rigidity of the “legs” is obtained using the locking system.