Dimensions: 7 x 7 mm Material: PCL Intended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 13 x 5 mm Material: PCL Intended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 15 x 5 mm Material: PCL Intended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 13 x 5 mm Material: PCL Intended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 15 x 5 mm Material: PCL Intended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 25 x 25 x 1 mm Material: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 50 x 50 x 1.25 mm Material: PCL Intended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 50 x 50 x 1.5 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 50 x 50 x 1 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletalsystem.

Dimensions: 50 x 50 x 2 mm Material: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 39 x 10 x 1.25 mm Material: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 39 x 10 x 1 mm Material: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 100 x 2 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 100 x 3.5 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 60 x 2 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 60 x 3.5 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 11 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 13 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 14 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 15 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 8 x 8 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 9 x 9 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 11 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 13 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 14 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 15 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 11 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 13 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 14 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 15 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 8 x 7 x 4 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 13 x 8 x 4 x 6 mm Material: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletal system.

Dimensions: 39 x 25 x 1.25 mmMaterial: PCLIntended Use: The Osteopore PCL Scaffold Bone Filler is intended for use in the repair of neurosurgical burr holes, craniotomy cuts and other cranial defects. It is also for use in the augmentation or restoration of bony contour in the craniofacial skeleton. It should be gently packed into bony voids or gaps of the skeletalsystem.