The material is an alternative to traditional dental prostheses material. SprintRay OnX Tough resin is intended exclusively for professional dental work.

The material is an alternative to traditional dental prostheses material. SprintRay OnX Tough resin is intended exclusively for professional dental work.

The material is an alternative to traditional dental prostheses material. SprintRay OnX Tough resin is intended exclusively for professional dental work.

SprintRay Ceramic Crown is a light-curable polymerizable resin intended to be used for the fabrication of; individual and fixed definitive full single crowns; definitive partial crowns in anterior and posterior area, individual and fixed single veneers; artificial teeth for dental prostheses, which are used for removable definitive full dentures; and individual and removable monolithic full and partial dentures in dental offices and laboratories. The material is an alternative to traditional restorative dental material.

SprintRay OnX Tough 2 is a tooth shade ceramic-hybrid resin used for the fabrication of hybrid denture prosthetics, implant-supported denture prosthetics, monolithic full and partial removable dentures, and preformed denture teeth to be used in a denture.

SprintRay OnX Tough 2 is a tooth shade ceramic-hybrid resin used for the fabrication of hybrid denture prosthetics, implant-supported denture prosthetics, monolithic full and partial removable dentures, and preformed denture teeth to be used in a denture.

SprintRay OnX Tough 2 is a tooth shade ceramic-hybrid resin used for the fabrication of hybrid denture prosthetics, implant-supported denture prosthetics, monolithic full and partial removable dentures, and preformed denture teeth to be used in a denture.

SprintRay OnX Tough 2 is a tooth shade ceramic-hybrid resin used for the fabrication of hybrid denture prosthetics, implant-supported denture prosthetics, monolithic full and partial removable dentures, and preformed denture teeth to be used in a denture.

SprintRay NightGuard Flex 2 is indicated for the fabrication of dental appliances such as mouthguards and nightguards.

SprintRay NightGuard Flex 2 is indicated for the fabrication of dental appliances such as mouthguards and nightguards.

SprintRay NightGuard Firm 2 is indicated for the fabrication of dental appliances such as mouthguards and nightguards.

APEX Base resin is a light-curable polymerizable resin intended to be used for the fabrication and repair of full and partial removable dentures and baseplates. The material is an alternative to traditional denture base material.

APEX Base resin is a light-curable polymerizable resin intended to be used for the fabrication and repair of full and partial removable dentures and baseplates. The material is an alternative to traditional denture base material.

APEX Base resin is a light-curable polymerizable resin intended to be used for the fabrication and repair of full and partial removable dentures and baseplates. The material is an alternative to traditional denture base material.

APEX Base resin is a light-curable polymerizable resin intended to be used for the fabrication and repair of full and partial removable dentures and baseplates. The material is an alternative to traditional denture base material.

APEX Teeth is a light-curable polymerizable resin intended to be used to fabricate artificial teeth for full and partial removable dentures. This material is an alternative to traditional denture teeth material.

APEX Teeth is a light-curable polymerizable resin intended to be used to fabricate artificial teeth for full and partial removable dentures. This material is an alternative to traditional denture teeth material.

APEX Teeth is a light-curable polymerizable resin intended to be used to fabricate artificial teeth for full and partial removable dentures. This material is an alternative to traditional denture teeth material.

APEX Teeth is a light-curable polymerizable resin intended to be used to fabricate artificial teeth for full and partial removable dentures. This material is an alternative to traditional denture teeth material.

SprintRay OnX Tough 2 is a tooth shade ceramic-hybrid resin used for the fabrication of hybrid denture prosthetics, implant-supported denture prosthetics, monolithic full and partial removable dentures, and preformed denture teeth to be used in a denture.

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Crown is an alternative to traditional dental prosthesis material that is intended exclusively for professional dental work. The device is manufactured via additive manufacturing process using a 3D printer with 405 nm wavelength, 50um print layer thickness, and light energy of 28.8 mW/cm2. It is available in the following shades: Bleach, A1, A2, A3, B1, C2, D2, B3, D3. The expected duration of use is based on in vitro testing where abrasion volume up to 6 mm3 and height loss up to 1.2 mm were observed under the test conditions (i.e. loading up to 2.4 MC).

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.

SprintRay Ceramic Crown is a photo-polymer methacrylate resin material used in conjunction with a 3D printer and a scanned 3D image in a dental office to build dental prosthetics by 3D printing layer upon layer of the composite material.