Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

For use with Natural Profile and UCLA-Type Abutments.Install with large external hex drivers (.048").

Prosthetic Cylinders provide precision fit to abutment. Used for Fabrication of Final Restoration. Plastic Cylinders are fabricated to assure clean burnout.

Angled Abutment are available for cases where implants are not able to provide alignments leading to clinical parallelism. Available in 15 and 30 degree angulations, they offer the clinician a wide range of three-dimensional options. Their internal design allows them to be locked into any one of twelve rotational positions. The 15 degree Angled Abutments are designed for use with cemented prostheses, and the 30 degree Angled Abutments for cemented or screw retained prostheses.

Angled Abutment are available for cases where implants are not able to provide alignments leading to clinical parallelism. Available in 15 and 30 degree angulations, they offer the clinician a wide range of three-dimensional options. Their internal design allows them to be locked into any one of twelve rotational positions. The 15 degree Angled Abutments are designed for use with cemented prostheses, and the 30 degree Angled Abutments for cemented or screw retained prostheses.

Angled Abutment are available for cases where implants are not able to provide alignments leading to clinical parallelism. Available in 15 and 30 degree angulations, they offer the clinician a wide range of three-dimensional options. Their internal design allows them to be locked into any one of twelve rotational positions. The 15 degree Angled Abutments are designed for use with cemented prostheses, and the 30 degree Angled Abutments for cemented or screw retained prostheses.

Angled Abutment are available for cases where implants are not able to provide alignments leading to clinical parallelism. Available in 15 and 30 degree angulations, they offer the clinician a wide range of three-dimensional options. Their internal design allows them to be locked into any one of twelve rotational positions. The 15 degree Angled Abutments are designed for use with cemented prostheses, and the 30 degree Angled Abutments for cemented or screw retained prostheses.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

Implant Interface design varies, dependent upon implant type. The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The RP Low Margin Abutment, these abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. The Low Margin Abutment is attached directly to the implant and allows for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites.

The RP Low Margin Abutment, these abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. The Low Margin Abutment is attached directly to the implant and allows for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites.

The RP Low Margin Abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The RP Low Margin Abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The RP Low Margin Abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The RP Low Margin abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The RP Low Margin Abutment, these abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. The Low Margin Abutment is attached directly to the implant and allows for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites.

A prefabricated device intended to provide a permanent intermediate fixture level between a dental implant and the final prosthesis/restoration (e.g., bridge, single tooth, overdenture). It includes one or more structural component(s) [e.g., abutment, ball, bar, bar overlay, coping, ring], and may be made of various materials [e.g., titanium (Ti), plastic, gold alloy]. It includes devices glued to prostheses and/or devices that can be replaced during cleaning cycles. An abutment screw(s) may be included, however the suprastructure does not represent the screw(s) in isolation. It may also be referred to as an abutment assembly or mesostructure.

The RP Low Margin Abutment, these abutments allow for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system; yet the same restorative procedures and instrumentation are used. The Low Margin Abutment is attached directly to the implant and allows for more aesthetic restorations than are possible with conventional standard abutments. Due to the abutment's conical shape, restorative components are unique to the system. Available in 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm cuff sizes. They accommodate up to 25% of total divergence between implants. Small diameter allows use at mandibular anterior sites.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The WP Natural Profile Abutment is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The WP Natural Profile Abutment is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The WP Natural Profile Abutment System is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform, and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The WP Natural Profile Abutment System is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform, and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.

Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.