The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

Prosthetic Screws are intended for fixation of abutment to dental implant.

Prosthetic Screws are intended for fixation of abutment to dental implant.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.Ask A Technician The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. Qty Ask A Technician The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. Qty Ask A Technician The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. Th

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The WP Natural Profile Abutment System is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform, and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The WP Natural Profile Abutment System is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform, and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The WP Natural Profile Abutment System is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform, and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

The WP Natural Profile Abutment System is attached directly to the implant and enables the clinician to restore cases that are periodontally and aesthetically demanding. This versatile system permits the development of an emergence profile which is in harmony with the soft tissue. Final margination can be prepared to accurately follow the gingival contours in order to achieve maximum aesthetics. They are available in regular platform, narrow platform, and wide platform. Intended for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into Abutment Bases which are screwed into endosseous implants.

Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.

Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.

Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.08415491039750

Devices are used in dental implant applications for oral rehabilitation of edentulous and partially dentate patients in the maxilla and mandible. Implant retained restorations may consist of single crowns or bridges as well as complete or partial dentures. Healing Abutments are intended for placement onto the implant during stage II surgery. As the tissue heals, it conforms to the contours of the abutment. As the gingiva heals, the tissue adapts to the form of the healing abutment, creating permanent oral access to the implant and prepares the gingiva for restoration.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

The UCLA-Type Abutment is attached directly to the implant. It provides a pattern for the creation of a screw retained veneered crown. Sterngold UCLA Abutments are available in single-implant (hexed) and multi-implant (non-hexed) designs. This abutment is well suited for sites with minimal thickness of soft tissue. They are available in wrought titanium 6 AL-4V ELI, gold and Delrin plastic.

For use with Natural Profile Abutments. Prosthetic Screws are intended for fixation of abutment to dental implant.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The ORA System is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The abutment screws directly into endosseous implants or they screw into SFI Abutments which are screwed into endosseous implants. The ORA Implant Abutment System is a precision machined ball shaped abutment that connects a compatible dental implant system with a removable partial or complete overdenture. The implant abutment is screwed into the dental implant. Connection to and retention of a denture is provided by a rubber o-ring, which may or may not be held within a metal housing. There are two color o-rings, a red processing o-ring and a white final o-ring. Connection and retention may also be provided by a plastic keeper that is processed into the denture.

The SternSnap Attachment is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The attachment screws into SFI Abutments which are screwed into endosseous implants. The SternSnap Attachment is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The attachment screws into SFI Abutments which are screwed into endosseous implants.

Stern Snap One-Piece Implant Abutment 2mm Cuff (B) Contents: 1 attachment, 1 each Yellow and Green retaining caps, 1 blockout spacer. SternSnap Overdenture Implant Abutment System that can be used to retain overdentures on most popular implants. It features a low profile that takes up only 2.5mm of height in the denture and has a long-lasting plastic retention cap that comes in three retention levels (1 lb, 2lb and 3 lb) and doesn’t require a metal housing, making it a simpler, more economical option.

Stern Snap One-Piece Implant Abutment 3mm Cuff (B) Contents: 1 attachment, 1 each Yellow and Green retaining caps, 1 blockout spacer SternSnap Overdenture Implant Abutment System that can be used to retain overdentures on most popular implants. It features a low profile that takes up only 2.5mm of height in the denture and has a long-lasting plastic retention cap that comes in three retention levels (1 lb, 2lb and 3 lb) and doesn’t require a metal housing, making it a simpler, more economical option.

The SternSnap Attachment is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The attachment screws into SFI Abutments which are screwed into endosseous implants. The SternSnap Attachment consists of a modified ball, which screws into an SFI Abutment and a retaining cap that gets processed into the denture. The retaining female engages the outside of the ball shape and allows retention of the prosthesis to the denture.

The SternSnap Attachment is indicated for use with dental implants to support and/or retain removable dental prostheses in the treatment of partially or totally edentulous patients to restore chewing function. The attachment screws into SFI Abutments which are screwed into endosseous implants. The SternSnap Attachment consists of a modified ball, which screws into an SFI Abutment and a retaining cap that gets processed into the denture. The retaining female engages the outside of the ball shape and allows retention of the prosthesis to the denture.