Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for Arm.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for Thigh.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for the Lower Leg.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for IVRA (arm).

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for the Arm and has dual port capabilities.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for Thigh and has dual port capabilities.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for Lower Leg and has dual port capabilities.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This part number is specifically used for IVRA (arm) and has dual port capabilities.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This has dual port capabilities.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This has dual port capabilities.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This has dual port capabilities.

Delfi tourniquet cuffs are available in various models for pediatric to bariatric patients. Available in a selection of lengths and widths to facilitate proper fit, and color coded for size and identification. Single use tourniquet cuffs are intended for single use only. This has dual port capabilities.

Reduction Head Cannulated Mulit-Axial Screw

ACU 1060.1 Transtracheal Catheter provides tracheal access for manual jet ventilators. The attached syringe helps to determine correct needle placement in the trachea by air aspiration. Needle size: 13Gauge / Adult RX only.

ACU 1060.2 Transtracheal Catheter provides tracheal access for manual jet ventilators. The attached syringe helps to determine correct needle placement in the trachea by air aspiration. Needle size: 14Gauge / Child RX only.

The ADP 150 Hose Connector: Dimensions - 15mm O.D. x 1/2" O/D. Reusable.

A device with a handle used to plug the end of an anesthesia circuit/breathing circuit at two possible locations: the Y-piece or the gas sampling elbow. The temporary plugging of the anesthesia breathing circuit allows anesthetic gases to be flushed from the anesthesia machine through the WAG (waste anesthetic gas) scavenging line by way of continuous oxygen/air flow rate over a set amount of time, or by activating the flush valve and applying positive bag pressure in repeated succession. This practice reduces the amount of anesthetic gas released into the operating room and thus reduces harmful gas exposure to operating room personnel and premature anesthetic gas exposure to patients during preoxygenation or mask induction.There is no patient contact as the plug must be removed before the breathing circuit can be attached to a mask, endo/naso-tracheal tube, or any other breathing device.

Curved Macintosh laryngoscope blade Size 1 - 87mm

Curved Macintosh laryngoscope blade Size 2 - 108mm

Curved Macintosh laryngoscope blade Size 3 - 130mm

Curved Macintosh laryngoscope blade Size 4 - 158mm

Straight Miller laryngoscope blade Size 0 - 75mm

Straight Miller laryngoscope blade Size 1 - 102mm

Straight Miller laryngoscope blade Size 1.5 - 127mm

Straight Miller laryngoscope blade Size 2 - 155mm

Straight Miller laryngoscope blade Size 3 - 195mm

Straight Miller laryngoscope blade Size 4 - 205mm

Wall-mounted storage box provides storage and immediate availability for emergency-use items such as oxygen masks, resuscitator bags, airways, masks, filters, etc. (The storage box does not include these items.) Dimensions: 20" Length x 8" Width x 6" Depth.

BE 1000-2 Bag Hanger mates with arm of O2 Instant Flow Valve to support a resuscitation bag. This is an accessory to the BE 3000 Series Oxygen Instant Flow Valves. Reusable.

Tapered Connector - 22mm ID x 27mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 22mm ID x 22mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Ventilator Tubing Accessory - Swivel Tubing Clamp. Swivels 360 degrees; fits tubing and rails 1/2" to 1" inch diameter.

The BE 105-101-40 Pressure Adapter with Connector: Dimensions - Barbed port fits 3/16" I.D. tubing x 15mm I.D./22mm O.D. x 22mm I/D (silicone connector end) . Barbed port is capped with a silicone rubber cap.

Swivel Adapter 22mm ID x 15mm ID/22mm OD. Specialty adapter for ventilator circuits/CPAP systems. Swivels 360 degrees. Molded of polypropylene. Single Patient Use.

General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circuit. Molded of polycarbonate. Reusable.

General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circuit. Molded of polystyrene butadiene, Single Patient Use.

The BE 105-40 Pressure Adapter: Dimensions - Barbed port fits 3/16" I.D. tubing, x 15mm I.D./22mm O.D. x 15mm I.D./22mm O.D. Barbed port is capped with a silicone rubber cap.

BE 105-7 Bronchoscope Swivel - 15mm ID (patient port) x15mm OD (equipment port). Reusable. Fits components of adult ventilator circuits. Molded of polyetherimide. Includes two silicone rubber caps; one cap allows for the use of a suctioning catheter while the other cap allows for the use of a fiber-optic bronchoscope without significant loss of PEEP.

BE 105-8 Bronchoscope Swivel - 15mm ID/22mm OD (patient port) x15mm OD (equipment port). Reusable. Fits components of adult ventilator circuits. Molded of polyetherimide. Includes two silicone rubber caps; one cap allows for the use of a suctioning catheter while the other cap allows for the use of a fiber-optic bronchoscope without significant loss of PEEP.

Specialty Adapter with Vent - 15mm ID/22mm OD/15mm ID/22mm OD. Fits components of adult ventilator circuits. Molded of polycarbonate. Reusable.

The BE 114-1 Flexible Support Arm Pole Bracket permits mounting of "Flexible Support Arms" to poles up to 1" in diameter. Components and materials: bracket body: anodized aluminum; screw: steel with phenolic handle. Made in the USA.

The BE 114-2 Flexible Support Arm Pole Bracket permits mounting of "Flexible Support Arms" to poles up to 1.5" in diameter. Components and materials: bracket body: anodized aluminum; screw: steel with phenolic handle. Made in the USA.

The BE 114-5 Flexible Support Arm Universal Rail Mount Bracket permits rail mounting of "Flexible Support Arms". The BE 114-5 is not compatible with rails mounted flush to wall. Components and materials: bracket body: anodized aluminum; screw: steel with phenolic knob. Made in the USA.

The BE114-5TB Flexible Support Arm Single Tubing Clamp holds a ventilator tube in place when attached to an III "Flexible Support Arm". Made of polypropylene with phenolic ball knob mount. Made in the USA.

The reusable BE 117 Non-Rebreathing ‘T’ is designed for use with a spontaneously breathing patient where “back flow” must be avoided. The ‘T’ is designed to prevent the flow of gas back toward the source and to ensure unilateral breathing.

The BE 117-W Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Can be used to easily add a monitoring device such as a temperature probe to the breathing circuit. Dimensions: 22mm O.D. x 22mm I.D. x 15mm I.D./22mm O.D. Single Patient Use. Molded of High Density Polyethylene.