ADHEZION BIOMEDICAL, LLC SP-015V SecurePortIV

SecurePortIV is a catheter securement adhesive to be applied as a film forming securement and sealant at the point of vascular access catheter skin entry.SP-015V50 unit box contains 50 SP-015V applicators

This adapter connects to the exhalation valve for additional versatility.

Reducing Adapter for use in breathing/ventilator circuit. - 15mm I.D./22mm O.D. x 30mm I.D. Molded of polyetherimide. Reusable.

The reusable BE 142-A is designed for use with ventilators, anesthesia machines, resuscitators, and other systems where PEEP or CPAP is required. A threshold-like resistance is applied after active exhalation. The PEEP valve prevents the exhalation pressure from dropping below a pre-determined value. PEEP ranges are adjustable from 3 to 20cm of water. Maximum PEEP can vary +/-10%. Objectives of PEEP therapy: 1) increase functional residual capacity by maintaining a positive pressure throughout the ventilatory cycle - improves gas distribution,2) aid in the prevention of atelectasis via aveolar stinting, 3) decrease in the inspired oxygen fraction (FiO2) is an advantage, 4) help in the stabilization of flail chest condition, and 5) monitor tidal volume by connecting a spirometer to the outlet port.

Burr, Oval, 10 flute, 3.0mm

These Stryker 3002 Ex Secure 2 Beds are in fully functional condition and include electric controls for adjusting the head, foot, and height positions, along with Trendelenburg capabilities. The bed has adjustable side rails and a secure braking system. It also features pressure-relief surfaces.

Table in great working condition. Moves up and down. Very tiny tear in vinyl (picture shown)

SecurePortIV is a catheter securement adhesive to be applied as a film forming securement and sealant at the point of vascular access catheter skin entry.

SecurePortIV is a catheter securement adhesive to be applied as a film forming securement and sealant at the point of vascular access catheter skin entry.SP-015V50 unit box contains 50 SP-015V applicators

This adapter connects to the exhalation valve for additional versatility.

Reducing Adapter for use in breathing/ventilator circuit. - 15mm I.D./22mm O.D. x 30mm I.D. Molded of polyetherimide. Reusable.

The reusable BE 142-A is designed for use with ventilators, anesthesia machines, resuscitators, and other systems where PEEP or CPAP is required. A threshold-like resistance is applied after active exhalation. The PEEP valve prevents the exhalation pressure from dropping below a pre-determined value. PEEP ranges are adjustable from 3 to 20cm of water. Maximum PEEP can vary +/-10%. Objectives of PEEP therapy: 1) increase functional residual capacity by maintaining a positive pressure throughout the ventilatory cycle - improves gas distribution,2) aid in the prevention of atelectasis via aveolar stinting, 3) decrease in the inspired oxygen fraction (FiO2) is an advantage, 4) help in the stabilization of flail chest condition, and 5) monitor tidal volume by connecting a spirometer to the outlet port.