Beckman Coulter, Inc. ODL25120 Automate 2500 Family

The AquaBplus Water Purification Systems are reverse osmosis units intended for use with hemodialysis systems to remove organic and inorganic substances and microbial contaminants from the water used for treating hemodialysis patients or related therapies. These devices are intended to be a component in a complete water purification system, and are not complete water treatment systems.Each reverse osmosis unit must be preceded by pre-treatment devices, and may need to be followed by post-treatment devices as well, to meet current AAMI/ANSI/ISO and Federal (U.S.) standards.

The AquaBplus Water Purification Systems are reverse osmosis units intended for use with hemodialysis systems to remove organic and inorganic substances and microbial contaminants from the water used for treating hemodialysis patients or related therapies. These devices are intended to be a component in a complete water purification system, and are not complete water treatment systems.Each reverse osmosis unit must be preceded by pre-treatment devices, and may need to be followed by post-treatment devices as well, to meet current AAMI/ANSI/ISO and Federal (U.S.) standards.

Coverslips

The sleep remote is an external device that is about the size of a cell phone and is used by the patient to activate the Inspire system before they go to sleep. The patient places the remote over the implanted IPG site, and uses push buttons on top of the programmer to: a.) turn the therapy ON or OFF, b.) temporarily suspend therapy, or c.) make adjustments to the stimulation strength (within limits set by the physician). The patient’s sleep remote also allows patients to check the status of the IPG battery. There are both visual and audio indicators that provide information on the IPG status (therapy ON/OFF, therapy paused, stimulation level and battery status). The Inspire sleep remote will only communicate with the Inspire IPG.

The sleep remote is an external device that is about the size of a cell phone and is used by the patient to activate the Inspire system before they go to sleep. The patient places the remote over the implanted IPG site, and uses push buttons on top of the programmer to: a.) turn the therapy ON or OFF, b.) temporarily suspend therapy, or c.) make adjustments to the stimulation strength (within limits set by the physician). The patient’s sleep remote also allows patients to check the status of the IPG battery. There are both visual and audio indicators that provide information on the IPG status (therapy ON/OFF, therapy paused, stimulation level and battery status). The Inspire sleep remote will only communicate with the Inspire IPG.

The VivaScope 2500 is an IVD confocal microscope that produces enlarged images of fresh or fixed specimens, in reflectance (phase contrast) mode, or in fluorescence mode for specimens that are stained with fluorochromes that fluoresce when illuminated with a laser. The VivaScope 2500 is used by physicians and other licensed healthcare professionals to view enlarged images of specimens during pathological examinations.

AMBCO Audiometer - Model 2500

The AquaBplus Water Purification Systems are reverse osmosis units intended for use with hemodialysis systems to remove organic and inorganic substances and microbial contaminants from the water used for treating hemodialysis patients or related therapies. These devices are intended to be a component in a complete water purification system, and are not complete water treatment systems.Each reverse osmosis unit must be preceded by pre-treatment devices, and may need to be followed by post-treatment devices as well, to meet current AAMI/ANSI/ISO and Federal (U.S.) standards.

The AquaBplus Water Purification Systems are reverse osmosis units intended for use with hemodialysis systems to remove organic and inorganic substances and microbial contaminants from the water used for treating hemodialysis patients or related therapies. These devices are intended to be a component in a complete water purification system, and are not complete water treatment systems.Each reverse osmosis unit must be preceded by pre-treatment devices, and may need to be followed by post-treatment devices as well, to meet current AAMI/ANSI/ISO and Federal (U.S.) standards.

The AquaBplus Water Purification Systems are reverse osmosis units intended for use with hemodialysis systems to remove organic and inorganic substances and microbial contaminants from the water used for treating hemodialysis patients or related therapies. These devices are intended to be a component in a complete water purification system, and are not complete water treatment systems.Each reverse osmosis unit must be preceded by pre-treatment devices, and may need to be followed by post-treatment devices as well, to meet current AAMI/ANSI/ISO and Federal (U.S.) standards.

The AquaBplus Water Purification Systems are reverse osmosis units intended for use with hemodialysis systems to remove organic and inorganic substances and microbial contaminants from the water used for treating hemodialysis patients or related therapies. These devices are intended to be a component in a complete water purification system, and are not complete water treatment systems.Each reverse osmosis unit must be preceded by pre-treatment devices, and may need to be followed by post-treatment devices as well, to meet current AAMI/ANSI/ISO and Federal (U.S.) standards.

Coverslips

The sleep remote is an external device that is about the size of a cell phone and is used by the patient to activate the Inspire system before they go to sleep. The patient places the remote over the implanted IPG site, and uses push buttons on top of the programmer to: a.) turn the therapy ON or OFF, b.) temporarily suspend therapy, or c.) make adjustments to the stimulation strength (within limits set by the physician). The patient’s sleep remote also allows patients to check the status of the IPG battery. There are both visual and audio indicators that provide information on the IPG status (therapy ON/OFF, therapy paused, stimulation level and battery status). The Inspire sleep remote will only communicate with the Inspire IPG.