BIO-MED DIAGNOSTICS, INC. 21-593-001 InTray DM-FungID

THD Slide is specifically designed to be immediately used with the THD Evolution/Revolution doppler de-arterialiser. THD Slide is a specifically designed anoscope/proctoscope for improving the THD procedure while treating the higher grades of the haemorrhoidal disease. The specific shape of the anoscope/proctoscope, which includes a sliding part, allows to perform the ligation and the prolapse reduction with the same device and reduces the disease for the patient and speeds up the procedure. The peculiar shape of the anoscope/proctoscope, with the sliding probe holder, allows to perform ligation and prolapse reduction with a single tool. The THD Slide anoscope/proctoscope is made in a clear, medical grade, plastic which allows, with the use of the shaped fibre optic tip, a perfect lightning of the operative field. The particular THD anoscope/proctoscope is designed to maintain the right strain into the anal cavity during the treatment and it presents a lodge for the THD needle holder. The supplied doppler probe lodges into the anoscope/proctosocpe and is in contact with the anal mucosa for an accurate detection of the haemorrhoidal arteries. The THD Slide One box contains 10 individually packed disposable doppler probes, which can be immediately be used without preventive cleaning and sterilisation. The box also con-tains 10 absorbable sutures packs (6 sutures each pack) and 10 THD Spon-Anal haemostatic sponges

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN+ steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existingchannel. The Osseoflex® SB knob can be turned clockwise to aid in directing the distal portion of the device. Turning the knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

Capsa Avalo Anesthesia Cart with key lock

Dental Scanner.

TUBE OCCLUDING FORCEPS 6

BURNISHERS B28/29 TITANIUM OCTAGON HANDLE

Simplex® HV with Gentamicin is a fast-setting acrylic resin with addition of gentamicin sulfate for use in bone surgery. Mixing the two separate sterile components produces a ductile bone cement which, after hardening, fixes the implant and transfers stresses produced during movement evenly to the bone. Simplex® HV with Gentamicinn cement powder also contains insoluble zirconium dioxide as an X-ray contrast medium. Simplex® HV with Gentamicin does not emit a signal and does not pose a safety risk in a magnetic resonance environment.

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

THD Slide is specifically designed to be immediately used with the THD Evolution/Revolution doppler de-arterialiser. THD Slide is a specifically designed anoscope/proctoscope for improving the THD procedure while treating the higher grades of the haemorrhoidal disease. The specific shape of the anoscope/proctoscope, which includes a sliding part, allows to perform the ligation and the prolapse reduction with the same device and reduces the disease for the patient and speeds up the procedure. The peculiar shape of the anoscope/proctoscope, with the sliding probe holder, allows to perform ligation and prolapse reduction with a single tool. The THD Slide anoscope/proctoscope is made in a clear, medical grade, plastic which allows, with the use of the shaped fibre optic tip, a perfect lightning of the operative field. The particular THD anoscope/proctoscope is designed to maintain the right strain into the anal cavity during the treatment and it presents a lodge for the THD needle holder. The supplied doppler probe lodges into the anoscope/proctosocpe and is in contact with the anal mucosa for an accurate detection of the haemorrhoidal arteries. The THD Slide One box contains 10 individually packed disposable doppler probes, which can be immediately be used without preventive cleaning and sterilisation. The box also con-tains 10 absorbable sutures packs (6 sutures each pack) and 10 THD Spon-Anal haemostatic sponges

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN+ steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existingchannel. The Osseoflex® SB knob can be turned clockwise to aid in directing the distal portion of the device. Turning the knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.