CARGUS INTERNATIONAL, INC 1141 MARK3

K-WIRE TROCAR POINT BOTH ENDS .062 X 4

AR-11910SR: Grasper, Mini Straight Tip, ø2.75 mm 15° Up Curved Shaft w/SR Handle AR-13600SR: Grasper, Alligator Hook Tip, ø4.2 mm, Straight Shaft w/SR Handle AR-12500SR: Grasper, Blunt Straight Tip, ø3.4 mm Straight Shaft w/SR Handle AR-11200: Punch, Large 2.75 mm, Straight Shaft AR-12000: Punch, Standard Straight Tip, ø3.4 mm Straight Shaft AR-12240: Punch, WideBiter 15° Up Tip, ø3.4 mm Straight Shaft AR-12241: Punch, WideBiter 15° Up Tip, ø3.4 mm 15° Up Curved Shaft AR-12530: Punch, Medium Reverse Straight Tip, ø3.4 mm Straight Shaft AR-12800: Punch, Medium 45° Right Angled Tip, ø3.4 mm Straight Shaft AR-12810: Punch, Medium 45° Left Angled Tip, ø3.4 mm Straight Shaft AR-12912: Punch, WideBiter 90° Right Rotary Tip, 3.4 mm Straight Shaft AR-12913: Punch, WideBiter Rotary 90° Left Tip, ø3.4 mm Straight Shaft AR-12950: Punch, Rotary with Scoop 90° Left Tip, ø3.4 mm Straight Shaft AR-12940: Punch, Rotary with Scoop 90° Right Tip, ø3.4 mm Straight Shaft

Fluid transfer set consisting of PVC tubing linking 6 mini-spikes to be used in conjunction with 2 ways transfer set through which the same substance from up to 6 rubber-stoppered glass vials may be delivered into a final IV container. It is equipped with a 0.2 micron hydrophobic air-filter that minimizes the formation of aerosols when preparing and dispensing the source substances. The spike on each line facilitates easy puncture of thick rubber stoppers of small diameter. The device provides fast fluid addition and extraction due to the large surface area of the air-filter that quickly equalizes pressures.

Gri-fill Peristaltic Set is an IV fluid transfer set to be used in conjunction with the Gri-Fill Pharmacy Compounder and ancillary Gri-Fill sets in hospital pharmacy to provide a fluid pathway through which one source substance is channeled repeatedly to an IV container. It consists of a silicone tube linking a male luer-lock connector and a spike (with a 0.2 µm hydrophobic air filter), and a female luer-lock connection.

The Visual LED Indicator is used to remotely monitor the operating status of a connected device (e.g. the reverse osmosis water treatment system).The status of a connected device is signaled:– Visually by three indicator lights (green, yellow, and red)– Acoustically by a sound generatorAn acoustic status signal can be muted temporarily at the touch of a button.The signaling device can currently be operated with the following reverse osmosis systems from Fresenius:– AquaA– AquaBplus