EAR TECHNOLOGY CORPORATION LB01-Refill LightBeam

Double Tantalum Clip 2mm

REUSABLE and STERILIZABLE device designed to remove a broken prosthetic screw from the inside of a dental implant.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

3M™ ESPE™ Adult Anterior Polycarbonate Replacement Crown, Second Bicuspids, Size 50, 50

50 pcs 1st aid kit

These accessory immobilization devices are intended for use in conjunction with a NeoCoil Flex Coil for patient comfort and stabilization. Please refer to the device labeling for intended use of your particular NeoCoil Flex Coil.

Heating Pad

Equipment for the extracorporeal pneumatically operated ballistic pressure wave therapy.

Double Tantalum Clip 2mm

REUSABLE and STERILIZABLE device designed to remove a broken prosthetic screw from the inside of a dental implant.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.