ILLUMINA, INC. DX-410-1001 MiSeqDx Instrument

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

The Illumina NextSeq 550Dx instrument is intended for sequencing DNA libraries prepared by adding sample indices and capture sequences to amplified targets. These libraries are captured on a flow cell and sequenced on the instrument using sequencing by synthesis (SBS) chemistry. SBS chemistry uses a reversible-terminator method to detect single nucleotide bases incorporated into growing DNA strands. Instrument software performs image analysis and base calling, assigning a quality score to each base for each sequencing cycle. When primary analysis finishes, secondary analysis processes base calls on the instrument. The NextSeq 550Dx instrument uses different secondary analysis modules depending on the workflow. For the germline or somatic variant calling modules, data processing includes de-multiplexing, FASTQ file generation, alignment, variant calling, and generation of variant call format (VCF) files containing information regarding variants found at specific positions in a reference genome.

The NovaSeq™ 6000Dx Instrument is intended for sequencing DNA libraries with in vitro diagnostic assays. For its input, the NovaSeq™ 6000Dx uses libraries generated from DNA where sample indexes and capture sequences are added to amplified targets. Sample libraries are captured on a flow cell and sequenced on the instrument using sequencing by synthesis (SBS) chemistry. SBS chemistry uses a reversible-terminator method to detect fluorescently labeled single nucleotide bases as they are incorporated into growing DNA strands. The Real-Time Analysis (RTA) software performs image analysis and base calling and assigns a quality score to each base for each sequencing cycle. When primary analysis finishes, secondary analysis can be executed on the included and required Illumina DRAGEN Server for NovaSeq™ 6000Dx to process base calls. The NovaSeq™ 6000Dx uses different secondary analysis applications depending on the workflow.

The Sentosa® SQ301 Platform is an in vitro diagnostic system composed of a sequencing instrument that measures the hydrogen ions that are generated during the incorporation of nucleotides in the DNA sequencing reaction and the ancillary instrumentation necessary for sample processing. This platform is used in conjunction with instrument-specific library preparation kits, template kits, sequencing kits, chip kits and data analysis software. The Sentosa® SQ301 Platform is intended for targeted sequencing of various biological samples. The Sentosa® SQ301 Platform is not intended for whole genome or de novo sequencing.

Set includes the following: Stryker Items: 3910-500-727 Suture Manipulator 3910-500-742 Suture Cutter 2mm 3910-500-739 Penetrating Grasper 45* 3910-500-738 Penetrating Grasper 30* 3910-500-737 Penetrating Grasper Str. 3910-500-736 Penetrating Grasper L 3910-500-735 Penetrating Grasper R 3910-500-850 5mm Probe x2 3910-500-733 Tissue Liberator Blade Up 3910-500-734 Tissue Liberator Blade Down 3910-500-732 Rasp Down Bend Arthrex Items: AR-13970SR KingFisher Suture Retriever/Tissue Grasper with SR Handle AR-13974SR FiberTape Retriever with SR Handle, Self-Ratcheting AR-11794L Suture Cutter, 4.2 mm, Open-End, Left Notch (Used w/ All Suture) AR-13250 FiberTape Suture Cutter

Burr, Oval, 10 flute, 3.0mm

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

The Illumina MiSeqDx is intended for targeted sequencing of human DNA using Illumina sequencing consumables and libraries prepared from human genomic DNA extracted from peripheral whole blood or formalin-fixed, paraffin-embedded (FFPE) tissue. Libraries are prepared by amplifying targets and adding sample indexes and capture sequences. Sample libraries are captured on a flow cell and sequenced on the instrument using sequencing by synthesis (SBS) chemistry. SBS chemistry uses a reversible-terminator method to detect single nucleotide bases as they are incorporated into growing DNA strands. The Real-Time Analysis (RTA) software performs image analysis and base calling, and assigns a quality score to each base for each sequencing cycle.The MiSeqDx instrument is not intended for whole genome or de novo sequencing. The MiSeqDx instrument is to be used with registered and listed, cleared, or approved IVD reagents and analytical software.

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

The Illumina NextSeq 550Dx instrument is intended for sequencing DNA libraries prepared by adding sample indices and capture sequences to amplified targets. These libraries are captured on a flow cell and sequenced on the instrument using sequencing by synthesis (SBS) chemistry. SBS chemistry uses a reversible-terminator method to detect single nucleotide bases incorporated into growing DNA strands. Instrument software performs image analysis and base calling, assigning a quality score to each base for each sequencing cycle. When primary analysis finishes, secondary analysis processes base calls on the instrument. The NextSeq 550Dx instrument uses different secondary analysis modules depending on the workflow. For the germline or somatic variant calling modules, data processing includes de-multiplexing, FASTQ file generation, alignment, variant calling, and generation of variant call format (VCF) files containing information regarding variants found at specific positions in a reference genome.

The NovaSeq™ 6000Dx Instrument is intended for sequencing DNA libraries with in vitro diagnostic assays. For its input, the NovaSeq™ 6000Dx uses libraries generated from DNA where sample indexes and capture sequences are added to amplified targets. Sample libraries are captured on a flow cell and sequenced on the instrument using sequencing by synthesis (SBS) chemistry. SBS chemistry uses a reversible-terminator method to detect fluorescently labeled single nucleotide bases as they are incorporated into growing DNA strands. The Real-Time Analysis (RTA) software performs image analysis and base calling and assigns a quality score to each base for each sequencing cycle. When primary analysis finishes, secondary analysis can be executed on the included and required Illumina DRAGEN Server for NovaSeq™ 6000Dx to process base calls. The NovaSeq™ 6000Dx uses different secondary analysis applications depending on the workflow.

The Sentosa® SQ301 Platform is an in vitro diagnostic system composed of a sequencing instrument that measures the hydrogen ions that are generated during the incorporation of nucleotides in the DNA sequencing reaction and the ancillary instrumentation necessary for sample processing. This platform is used in conjunction with instrument-specific library preparation kits, template kits, sequencing kits, chip kits and data analysis software. The Sentosa® SQ301 Platform is intended for targeted sequencing of various biological samples. The Sentosa® SQ301 Platform is not intended for whole genome or de novo sequencing.