INOGEN, INC. IO-300 OxyGo

The PulStar Spine Mobilization Device is intended for use by chiropractors, physical therapists and physicians for mobilization of the spine. The device consists of a hand-held impulse head attached to an electronic control module. The control module is connected to an Apple computer through a USB cable. Appropriate software is used to display the results of tissue compliance measurements.Intended Use and operation: Intended use of the PulStar is for the treatment of musculoskeletal pain due to joint subluxation, restricted joint mobility, myofacial spasm and ligamentous strain. The clinician uses a hand held impulse head to test the stiffness of the patient’s spine at each vertebral level, the results of this procedure are recorded in the patient file in a computer database and displayed on the computer screen. The clinician then decides where therapy is needed and applies multiple impulses with the impulse head to those areas of the body of the patient with the intent of reducing spinal stiffness. After treatment, the clinician repeats the initial test of the patient’s spine to document changes in stiffness effected by the therapy.

Florida Probe Pocket Depth Handpiece. Steam sterilizable periodontal probe with a titanium probe tip.

The SoundBite Hearing System by Sonitus Medical consists of two main components; a behind the ear (BTE) microphone unit and an in the mouth (ITM) hearing device. Accessories include a system charger and programming software. The BTE uses a digital signal processor to process the sound and a wireless chip to transmit the signals to the hearing device worn in the mouth. The ITM hearing device in turn creates imperceptible vibrations using a piezoelectric actuator that are sent via the teeth, through the skull bones, and ultimately to the cochleae.

The Thinklabs One Digital Stethoscope is intended for use as a diagnostic aid in patient diagnosis. It can be used for the amplification of heart, lung, and other body sounds with selective frequency filtering. This product is not designed, sold, or intended for any use except as indicated.The Thinklabs One is designed to be used by medical and allied professionals and trainees enrolled in professional training programs. Operation of the device requires no special training beyond the user following the instructions for use on Thinklabs website. Accurate patient diagnosis with a stethoscope requires the operator to have auscultation skills.

Cap for hair growth, photobiomodulation. 112 laser diode device.

Base unit assembly, 1500 RPM and 3 users, used on the G3 PowerVac G Dry Vacuums.

Midmark PowerVac G Dry vacuums are intended to provide suction during general examinations and procedures conducted by qualified dental professionals. Model: G3, Number of users: 3 - 5, Number of vacuums: 1, Total HP: 3.

The PulStar Spine Mobilization Device is intended for use by chiropractors, physical therapists and physicians for mobilization of the spine. The device consists of a hand-held impulse head attached to an electronic control module. The control module is connected to an Apple computer through a USB cable. Appropriate software is used to display the results of tissue compliance measurements.Intended Use and operation: Intended use of the PulStar is for the treatment of musculoskeletal pain due to joint subluxation, restricted joint mobility, myofacial spasm and ligamentous strain. The clinician uses a hand held impulse head to test the stiffness of the patient’s spine at each vertebral level, the results of this procedure are recorded in the patient file in a computer database and displayed on the computer screen. The clinician then decides where therapy is needed and applies multiple impulses with the impulse head to those areas of the body of the patient with the intent of reducing spinal stiffness. After treatment, the clinician repeats the initial test of the patient’s spine to document changes in stiffness effected by the therapy.

Florida Probe Pocket Depth Handpiece. Steam sterilizable periodontal probe with a titanium probe tip.

The SoundBite Hearing System by Sonitus Medical consists of two main components; a behind the ear (BTE) microphone unit and an in the mouth (ITM) hearing device. Accessories include a system charger and programming software. The BTE uses a digital signal processor to process the sound and a wireless chip to transmit the signals to the hearing device worn in the mouth. The ITM hearing device in turn creates imperceptible vibrations using a piezoelectric actuator that are sent via the teeth, through the skull bones, and ultimately to the cochleae.