JOHNSON & JOHNSON SURGICAL VISION, INC. OPOR1521R LAMINAR

Blunt-tipped Kirschner wire (rounded tip) designed to guide the countersink phase without disturbing the cortex.

Reusable Surgical Instrument Set associated to the WasherCap™ Fixation System in order to facilitate its implantation during the surgical process.

Cannulated instrument used to shape the bone cortex to place de cap of the WasherCap™ Fixation System correctly. The countersink is composed by two parts (the stop and the body). Both parts must be assembled to compose the countersink to ensure that it can be used in accordance with its intended use. The countersink need to be disassembled during its reprocessing in order to facilitate the cleaning process. Prior to the steriliation process, both parts should be assembled again in order to prepare the countersink for its next use.

Used to insert the screw of the WasherCap™ Fixation System.

SUTURE ANCHOR, PEEK SUTURETAK 3 X 12.2MM

DBL LOADED 5.5MM PEEK SWVLK

SUTR ANCH,BIO-COMP S-TAK

DB BKT PDS MASTER SERIES UR BICUSPID 022 T-7 A=0 R4M HK MG HGW OFFSET PAD

Motor and cord set - The SM3 is intended for use in dental oral surgery and dental implant. The main unit is designed to be used with a specific dental micromotor that drives dental handpieces fitted with appropriate tools to cut hard tissues in the mouth.

Blunt-tipped Kirschner wire (rounded tip) designed to guide the countersink phase without disturbing the cortex.

Reusable Surgical Instrument Set associated to the WasherCap™ Fixation System in order to facilitate its implantation during the surgical process.

Cannulated instrument used to shape the bone cortex to place de cap of the WasherCap™ Fixation System correctly. The countersink is composed by two parts (the stop and the body). Both parts must be assembled to compose the countersink to ensure that it can be used in accordance with its intended use. The countersink need to be disassembled during its reprocessing in order to facilitate the cleaning process. Prior to the steriliation process, both parts should be assembled again in order to prepare the countersink for its next use.

Used to insert the screw of the WasherCap™ Fixation System.