MEDTECH ROSAS00134 ROBOT STAND REFERENCE

A standalone HeRO monitor for two infants

The Liberty SRIMPORT software is an interface that is part of the SRIMPORT functionality to import data through a file based transmission. Its intended use is to import results from laboratory instruments, typically chemistry and special chemistry analysers. The interface module contains no interpretation algorithms and serves as a library functions to consolidate pre-determined results from external instruments. The Liberty SRIMPORT Software's indicated use is in the Blood Bank, Donor Centre and Plasma Testing Laboratories as well as Clinical Diagnostic and Screening Laboratories. It may be applied to a group of laboratory instruments that export test results to another device.

The AbutmentCAD module is intended as an aid to the restoration of chewing function in partially or fully edentulous mandibles and maxillae. AbutmentCAD is a software device intended to be used by trained professionals in dental practices or dental laboratories for the design of patient specific implant borne prosthetics such as one-piece abutments, two-piece/hybrid abutments, single or multi-unit screw-retained restorations. The design result is intended to be used by the manufacturer of an endosseous dental implant abutment to create the final device.

For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.

Syringe Stand

The Radlink GPS Tablet Stand functions as a mobile workstation and charger for the Radlink GPS Tablet and Wireless C-Arm Kit. The stand can be connected to a mains electricity source and charge both the GPS Tablet and WCA Kit simultaneously. Accessories for both devices can also be housed in the GPS Tablet Stand.

MR8 Spine Drill Set - IPC Console and Foot Pedal Included.

Stryker CORE 2 5400-052-000 Power Console w/ Stryker 5400-300-000 Pi Drive + Spine Drill. What's Included: Stryker CORE 2 Power Console; (REF 5400-052-000); Qty: 1 Stryker Pi Drive + Spine Drill; (REF 5400-300-000 ); Qty: 1 Stryker Elite 12cm Angled Attachment; (REF 5407-120-472); Qty: 1 Stryker Elite 14cm Straight Attachment; (REF 5407-120-480); Qty: 1 Stryker Elite 12cm Straight Attachment; (REF 5407-120-470); Qty: 1 Stryker Elite 14cm Angled Attachment; (REF 5407-120-482); Qty: 1 Stryker MIS Hub Attachment; (REF 5407-120-900); Qty: 1 Stryker Core Sabre Handswitch; (REF 5400-121); Qty: 1 Stryker CORE Sterilization Case; (REF 5400-277-000); Qty: 1

A standalone HeRO monitor for two infants

The Liberty SRIMPORT software is an interface that is part of the SRIMPORT functionality to import data through a file based transmission. Its intended use is to import results from laboratory instruments, typically chemistry and special chemistry analysers. The interface module contains no interpretation algorithms and serves as a library functions to consolidate pre-determined results from external instruments. The Liberty SRIMPORT Software's indicated use is in the Blood Bank, Donor Centre and Plasma Testing Laboratories as well as Clinical Diagnostic and Screening Laboratories. It may be applied to a group of laboratory instruments that export test results to another device.

The AbutmentCAD module is intended as an aid to the restoration of chewing function in partially or fully edentulous mandibles and maxillae. AbutmentCAD is a software device intended to be used by trained professionals in dental practices or dental laboratories for the design of patient specific implant borne prosthetics such as one-piece abutments, two-piece/hybrid abutments, single or multi-unit screw-retained restorations. The design result is intended to be used by the manufacturer of an endosseous dental implant abutment to create the final device.

For In Vitro Diagnostic UseSectra Digital Pathology Module device is a software intended for viewing and management of digital images of scanned surgical pathology slides prepared from formalin-fixed paraffin embedded (FFPE) tissue. It is an aid to the pathologist to review and interpret these digital images for the purposes of primary diagnosis.Sectra Digital Pathology Module is not intended for use with frozen section, cytology, or non-FFPE hematopathology specimens.It is the responsibility of the pathologist to employ appropriate procedures and safeguards to assure the validity of the interpretation of images using Sectra Digital Pathology Module.Sectra Digital Pathology Module is intended for use with Leica's Aperio AT2 DX scanner and Dell MR2416 monitor.