Micro-Tech (Nanjing) Co., Ltd. EUS-22-0 MT

Sheath: 1.8mm, Needle: 1.1mm, Needle Length out of sheath: 80mm, Material: 304SS, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

Sheath: 1.8mm, Needle: 1.1mm, Needle Length out of sheath: 80mm, Material: Co-Cr Alloy, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

Sheath: 1.8mm, Needle: 0.5mm, Needle Length out of sheath: 80mm, Material: Co-Cr Alloy, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

Amplatz Type Renal Dilator/Sheath Set

Stryker InstruMed SmartPump Dual Channel Tourniquet System in good working condition. This device offers versatile support for medical procedures involving single cuff, Bier Block, and bilateral procedures on both upper and lower extremities simultaneously. Its Dual Channel system ensures continuous monitoring, control, and real-time display of cuff activities. Additionally, it allows independent management of pressure and inflation time settings for each cuff.

Stryker Tourniquet Dual Channel Pump

ELEVATORS BERNARD OUT

Sheath: 1.8mm, Needle: 0.7mm, Needle Length out of sheath: 80mm, Material: Co-Cr Alloy, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

Sheath: 1.8mm, Needle: 0.5mm, Needle Length out of sheath: 80mm, Material: 304SS, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

Sheath: 1.8mm, Needle: 1.1mm, Needle Length out of sheath: 80mm, Material: 304SS, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

Sheath: 1.8mm, Needle: 1.1mm, Needle Length out of sheath: 80mm, Material: Co-Cr Alloy, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

Sheath: 1.8mm, Needle: 0.5mm, Needle Length out of sheath: 80mm, Material: Co-Cr Alloy, Working channel is more than or equal to 2.8mm, Working Length: 1375~1415mm, EUS FNA needle

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.