OSKO, INC. Edge Air Edge Air

Precision Reciprocating (22.5 x 0.64mm)

K-WIRE Trocar POINT BOTH ENDS .035 x 4

KermaX Product family is designed to be installed in diagnostic x-ray units and is intended to be used for the measurement of Dose Area Product (DAP)/ DAP rate, exposure time.

The ClearVision ExamVue Flat Panel Detector consists of a line of 3 different models of solid state x-ray detectors, of differing size and characteristics, designed for use by radiologists and radiology technicians for the acquisition of digital x-ray images. The ClearVision ExamVue Flat Panel Detector captures digital images of anatomy through the conversion of x-rays to electronic signals, eliminating the need for film or chemical processing to create a hard copy image. The ClearVision ExamVue Flat Panel Detector incorporates the ExamVueDR software, which performs the processing, presentation and storage of the image in DICOM format. All models of the ClearVision ExamVue Flat Panel Detector use aSi TFTD for the collection of light generated by a CsI scintillator, for the purpose of creating a digital x-ray image. The three available models are:a. A 14x17in (35x43cm) tethered cassette sized panelb. A 14x17in (35x43cm) wireless cassette sized panel with automatic exposure detectionc. A 17x17in (43x43cm) tethered panel for fixed installations.

X-Ray Detectable Sponge, Sterile, 4" x 4", 16-Ply, 10 per tray

Digital Flat Panel X-Ray Detector used to generate images of any part of the body. The system consists of a scintillator directly coupled to an a-Si TFT sensor. The system generates high-resolution and high-sensitive digital images.

BRAND NEW NEVER BEEN USED Safety at all times: High-end functions for the protection of cell cultures, bacteria cultures or tissue cultures.

Precision Thin Offset (10.0 x 0.38 x 43.0mm)

2108 Series Sagittal Blade (28.9 x 0.64 x 58.7mm)

K-WIRE TROCAR POINT BOTH ENDS .062 X 4

Precision Reciprocating (22.5 x 0.64mm)

K-WIRE Trocar POINT BOTH ENDS .035 x 4

KermaX Product family is designed to be installed in diagnostic x-ray units and is intended to be used for the measurement of Dose Area Product (DAP)/ DAP rate, exposure time.

The ClearVision ExamVue Flat Panel Detector consists of a line of 3 different models of solid state x-ray detectors, of differing size and characteristics, designed for use by radiologists and radiology technicians for the acquisition of digital x-ray images. The ClearVision ExamVue Flat Panel Detector captures digital images of anatomy through the conversion of x-rays to electronic signals, eliminating the need for film or chemical processing to create a hard copy image. The ClearVision ExamVue Flat Panel Detector incorporates the ExamVueDR software, which performs the processing, presentation and storage of the image in DICOM format. All models of the ClearVision ExamVue Flat Panel Detector use aSi TFTD for the collection of light generated by a CsI scintillator, for the purpose of creating a digital x-ray image. The three available models are:a. A 14x17in (35x43cm) tethered cassette sized panelb. A 14x17in (35x43cm) wireless cassette sized panel with automatic exposure detectionc. A 17x17in (43x43cm) tethered panel for fixed installations.