Radiometer Medical ApS 905-866 Electrolyte 54

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. The MC is single-use.

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I).

Adhesive rings N20 kit, dispenser incl. 1 roll of 250 adhesive rings 20 mm, 1x vial contact gel

Fixation kit N20, dispenser incl. 1 roll of 60 fixation rings 20 mm, 1xvial contact gel

BIO-COMP INTERFSCRW CAN-DELTATPR 11X35MM

Membraning kit for tc sensor 54, 12 preparators, 1x electrolyte 10 ml.

tc Sensor 54, pCO2

Electrolyte for tc sensor 84

Membraning kit for tc sensor 84, 12 preparators, 1x electrolyte 10 ml.

tc Sensor 84, pCO2/pO2

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. The MC is single-use.

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I).

Adhesive rings N20 kit, dispenser incl. 1 roll of 250 adhesive rings 20 mm, 1x vial contact gel

Fixation kit N20, dispenser incl. 1 roll of 60 fixation rings 20 mm, 1xvial contact gel