Radiometer Medical ApS 905-869 Electrolyte 84

Membraning kit for tc sensor 54, 12 preparators, 1x electrolyte 10 ml.

tc Sensor 54, pCO2

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. The MC is single-use.

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I).

MasimoSET LNCS Neo Neonatal/Adult Pulse Oximeter Adhesive Sensor

BIO-COMP INTERFSCRW CAN-DELTATPR 11X35MM

The Home Access A1c Test kit is an in vitro test for the quantitative measurement of Hemoglobin A1c using capillary blood. Measurements obtained through this test kit can be used for monitoring the long-term control of blood sugar (glucose) in people with diabetes. Contains space for Patient PCP information.

Membraning kit for tc sensor 84, 12 preparators, 1x electrolyte 10 ml.

tc Sensor 84, pCO2/pO2

Electrolyte for tc sensor 54

Membraning kit for tc sensor 54, 12 preparators, 1x electrolyte 10 ml.

tc Sensor 54, pCO2

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. The MC is single-use.

The membrane and the electrolyte of SenTec TC Sensors must be changed periodically. For this purpose the old sensor membrane must be removed, the sensor surface must be cleaned, new electrolyte must be applied and a new sensor membrane must be put on. The patented Membrane Changer (MC-R) is a tool that allows the user to carry out the whole membrane change process by 4 simple press-and-turn steps. To enable an economic and cost saving membrane change, the Membrane Changer after use can be reloaded with a new Membrane Changer Insert (MC-I).