RHEIN 83 SRL 036PTM9 ENDODONTIC POSTS

Straight Connector - 22mm ID x 22mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Pilot tube repair kit is used to repair a leaking pilot line of endotracheal and tracheostomy tubes with inside diameters of 0.032 inch (21 gauge) to 0.050 inch (18 gauge). Use of a pilot tube repair kit can delay the replacement of the endotracheal or tracheostomy tube thus reducing trauma to the patient.

The reusable BE 131 One-Way Valve is designed for use in any breathing circuit or ventilatory system where "back flow" must be avoided. It is designed to prevent the flow of gas back toward the source.The device includes a silicone rubber connector with 22mm I.D. Inlet.

The reusable BE 117 Non-Rebreathing ‘T’ is designed for use with a spontaneously breathing patient where “back flow” must be avoided. The ‘T’ is designed to prevent the flow of gas back toward the source and to ensure unilateral breathing.

BURNISHERS B28/29 TITANIUM OCTAGON HANDLE

TUBE OCCLUDING FORCEPS 6

Ventilator Tubing Accessory - Swivel Tubing Clamp. Swivels 360 degrees; fits tubing and rails 1/2" to 1" inch diameter.

The BE 139 Pressure Adapter: Dimensions - Barbed port fits 3/16" I.D. tubing x 15mm I.D./22mm O.D. x 15mm O/D.

Swivel Adapter 22mm ID x 15mm ID/22mm OD. Specialty adapter for ventilator circuits/CPAP systems. Swivels 360 degrees. Molded of polypropylene. Single Patient Use.

Tapered Connector - 22mm ID x 27mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 22mm ID x 22mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Pilot tube repair kit is used to repair a leaking pilot line of endotracheal and tracheostomy tubes with inside diameters of 0.032 inch (21 gauge) to 0.050 inch (18 gauge). Use of a pilot tube repair kit can delay the replacement of the endotracheal or tracheostomy tube thus reducing trauma to the patient.

The reusable BE 131 One-Way Valve is designed for use in any breathing circuit or ventilatory system where "back flow" must be avoided. It is designed to prevent the flow of gas back toward the source.The device includes a silicone rubber connector with 22mm I.D. Inlet.

The reusable BE 117 Non-Rebreathing ‘T’ is designed for use with a spontaneously breathing patient where “back flow” must be avoided. The ‘T’ is designed to prevent the flow of gas back toward the source and to ensure unilateral breathing.