RHEIN 83 SRL 880CLR DENTAL ATTACHMENTS

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

REUSABLE and STERILIZABLE device designed to remove a broken prosthetic screw from the inside of a dental implant.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

Burr, Oval, 10 flute, 3.0mm

Capsa Avalo Anesthesia Cart with key lock

BURNISHERS B28/29 TITANIUM OCTAGON HANDLE

TUBE OCCLUDING FORCEPS 6

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

REUSABLE and STERILIZABLE device designed to remove a broken prosthetic screw from the inside of a dental implant.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s). An access channel is required for the Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to it's start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.

The Osseoflex® SB is designed for use in balloon kyphoplasty. The balloon serves to create a cavity in the vertebral body, thereby reducing the fracture while still allowing for cement interdigitation. The balloon catheter is the functional part of the device that creates a cavity and reduces the fracture. The balloon catheter provides a conduit through which the physician can inflate the balloon at the distal end of the catheter. After the bone is disrupted, PMMA is injected through an Osseoflex® SN steerable needle to fill the previously created void(s).An access channel is required for Osseoflex® SB placement. The Osseoflex® SB device does not create an access channel; the Osseoflex® SB is designed to follow a pre-existing channel created by an access channel device.If the balloon has an Articulating Stylet inserted it enables the steerable feature of the balloon. The articulating or steering feature of the device assists the clinician in directing the device through the pre-existing channel. The Osseoflex® SB actuation knob can be turned clockwise to aid in directing the distal portion of the device. Turning the actuation knob counter-clockwise will relax the device and allow the device to be returned to its start position. The device should be manipulated only while under fluoroscopic observation with radiographic equipment that provides high quality images.