SHIFENG MEDICAL TECHNOLOGY CO.，LTD. RG3 RG3

ACCU-CHEK 360 INSULIN PUMP CONFIG SW US

Elite Biomedical Solutions Dose Request Cord is a replacement for the BD Alaris PCA Pump Model 8120 syringe infusion pump. Elite Biomedical Solutions does not manufacture the pump. The Dose Request Cord is an accessory for the pump and is available as a replacement part. The Dose Request Cord contains a handpiece with integral cable which plugs into the mating connector on the BD Alaris PCA Pump to allow the patient to request medication within the parameters entered into the syringe/infusion pump by the healthcare provider and the designed limits on the pumps.The Elite Biomedical Solutions Dose Request Cord has the same type of construction and technological characteristics as the predicate device, which is also a replacement bolus cable. Both the subject and predicate device are equivalent to the accessories supplied with the original pump. The Dose Request Cords are passive devices that contain no powered electronic components. They are powered by the mating equipment using low voltages to detect changes in the state of the push button. Shielding and insulation of these devices is substantially equivalent to the predicate device.

UTC 3mL Medication Cartridge: The UTC 3 mL Medication Cartridge is intended for use in hospital and outpatient care environments with the CADD-MS®3 Ambulatory Infusion Pump for subcutaneous infusion of medication in adults

DANA 3cc Syringe is an insulin reservoir for using insulin pump. It is installed into the SOOIL's insulin pump and connected to an infusion set in order to deliver insulin to the patients.

Thermal Angel Ultra Operations Module

Thermal Angel Ultra Emergency Pack, incl 2 IV Fluid Warmers, 2 Ext Sets, Battery, Charger, Cable

Thermal Angel Standard Emergency Pack, incl 4 IV Fluid Warmers, 4 Ext Sets, Battery, Charger, Cable

Thermal Angel Disposable Emergency Pack Reload Kit, incl 4 IV Fluid Warmers, 4 Ext Sets

KIT, TA-200 BLOOD WARMER NON-STERILE DEMO

ACCU-CHEK 360 INSULIN PUMP CONFIG SW US

Elite Biomedical Solutions Dose Request Cord is a replacement for the BD Alaris PCA Pump Model 8120 syringe infusion pump. Elite Biomedical Solutions does not manufacture the pump. The Dose Request Cord is an accessory for the pump and is available as a replacement part. The Dose Request Cord contains a handpiece with integral cable which plugs into the mating connector on the BD Alaris PCA Pump to allow the patient to request medication within the parameters entered into the syringe/infusion pump by the healthcare provider and the designed limits on the pumps.The Elite Biomedical Solutions Dose Request Cord has the same type of construction and technological characteristics as the predicate device, which is also a replacement bolus cable. Both the subject and predicate device are equivalent to the accessories supplied with the original pump. The Dose Request Cords are passive devices that contain no powered electronic components. They are powered by the mating equipment using low voltages to detect changes in the state of the push button. Shielding and insulation of these devices is substantially equivalent to the predicate device.

UTC 3mL Medication Cartridge: The UTC 3 mL Medication Cartridge is intended for use in hospital and outpatient care environments with the CADD-MS®3 Ambulatory Infusion Pump for subcutaneous infusion of medication in adults

DANA 3cc Syringe is an insulin reservoir for using insulin pump. It is installed into the SOOIL's insulin pump and connected to an infusion set in order to deliver insulin to the patients.