RevMed
Home/Specialty/Cardiovascular/Percutaneous Catheter, Ultrasound/Shockwave Medical L6 Intravascular Lithotripsy (IVL) Catheter

Shockwave Medical, Inc. L6IVL080030 Shockwave Medical L6 Intravascular Lithotripsy (IVL) Catheter

Company Name
Shockwave Medical, Inc.
Catalog Number
L6IVL080030
Device Size
  • Catheter Working Length: Centimeter
  • Balloon Proximal Outer Diameter (OD): Inch
  • Balloon Diameter: Millimeter
  • Balloon Length: Millimeter
  • Introducer Sheath Compatibility: French
  • Guidewire Diameter: Inch
  • Balloon Nominal (Inflation) Pressure: Atmosphere
  • Balloon Nominal (Inflation) Pressure: Atmosphere
  • Balloon Nominal (Inflation) Pressure: Atmosphere
  • Balloon Rated Burst Pressure: Atmosphere

Description

The IVL Catheter is a proprietary lithotripsy device delivered through the peripheral arterial system of the lower extremities to the site of an otherwise difficult to treat calcified stenosis. Energizing the lithotripsy device will generate pulsatile mechanical energy within the target treatment site, disrupting calcium within the lesion and allowing subsequent dilation of a peripheral artery stenosis using low balloon pressure. The IVL Catheter is comprised of an integrated balloon with an array of lithotripsy emitters for the localized delivery of pulsatile mechanical energy. The system consists of an IVL Catheter, an IVL Connector Cable and an IVL Generator. The IVL Catheter is available in four (4) sizes: 8.0 x 30mm, 9.0 x 30mm, 10.0 x 30mm, and 12.0 x 30mm. The L6 Peripheral IVL Catheter is compatible with a 7 or 8F sheath and has a working length of 110cm.The Shockwave L6 Peripheral IVL Catheter shaft contains an inflation lumen, a guidewire lumen, and the lithotripsy emitters. The inflation lumen is used for inflation and deflation of the balloon with 50/50 saline/contrast medium. The guidewire lumen enables the use of a 0.018” guidewire to facilitate advancement of the catheter to and through the target stenosis. The system is designed as ‘Over-the-wire’ (OTW) with 110cm shaft working length, so an exchange length (300cm) guidewire is indicated. The emitters are positioned along the length of the balloon working length for delivery of pulsatile mechanical energy. The balloon is located near the distal tip of the catheter. Two radiopaque marker bands within the balloon denote the length of the balloon to aid in positioning of the balloon during treatment. The balloon is designed to provide an expandable segment of known length and diameter at a specific pressure. The proximal hub has three ports: one for inflation/deflation of the balloon, one for guidewire lumen, and one for connection to the IVL Connector Cable.
Have questions or need more information? Contact Us
RevMed is an independent marketplace for reselling medical devices and equipment. We are not affiliated with or endorsed by manufacturers, and all trademarks and brand names belong to their respective owners. Product images and descriptions are for reference only, and RevMed does not provide medical advice, training, or support.
Find Savings Automatically!
Your trusted browsing companion

Additional Details

Device Identifier
00195451000386
Is RX
Yes
Is Over the Counter
No
Requires Sterilization
No
Is Sterile
Yes
Is Single Use
Yes

Barcode Mapping

Unit of MeasurementEachesGTIN
Each100195451000386