SOLTA MEDICAL 130-0105 ORIGINS

The NeoCoil 1.5T l6ch Flex SPEEDER is a receive-only phased array coil system designed to provide high resolution imaging for the upper and lower extremities, chest, abdomen, pelvis, head, neck, and spine. The system is compatible with 2D, 3D, parallel and isotropic imaging, as well as, coil signal intensity correction.

Software dedicated only to the Enbio autoclaves and created by our company. It will be a read-only, visualization software for carried out sterilization or test cycles. This software will not be a software necessary for the proper operation of the device and may not be used by the end user at all. Also will not give the possibility of any interference in the device operating parameters and records of sterilization or tests carried out.

3M™ ESPE™ Adult Anterior Polycarbonate Replacement Crown, Upper Left Centrals, Size 17, 17

FORCEPS MOLARS #17

This attachment to the Valtchev Uterine Mobilizer model VUM-6 is a stainless steel obturator having a length of 45 mm and shaft thickness of 3 mm. The pin on the obturator must slip into the notch of the head of the VUM-6 base instrument. The obturator has no stand alone functionality and is either sold as part of the VUM-6 complete set or as a separate replacement part.

Root elevator "Bein"4.0 mmH-Type C1

TIDI Positioning Aid Kits Kit, Various Sizes 10 per Set

KIT, ROUTINE X-RAY. Includes: 112 - DISC, CIRCULAR, 7” DIAMETER x 1.5” (00810050241175), 114 - RECTANGLE, 2” x 7.5” x 9.5” (00810050241649), 116 - WEDGE, 3” x 4” x 7” (10810050242964), 117 - WEDGE, 2.5” x 7” x 10” (10810050242933), 118 - WEDGE, 7” x 7” x 7” (00810050242387), 121 - BLOCK, OBLIQUE FINGER, 3.13” x 5.5” x 5” (00810050241052), 122 - WEDGE, 3.5” x 7” x 8” (10810050242971)

The NeoCoil 1.5T l6ch Flex SPEEDER is a receive-only phased array coil system designed to provide high resolution imaging for the upper and lower extremities, chest, abdomen, pelvis, head, neck, and spine. The system is compatible with 2D, 3D, parallel and isotropic imaging, as well as, coil signal intensity correction.

Software dedicated only to the Enbio autoclaves and created by our company. It will be a read-only, visualization software for carried out sterilization or test cycles. This software will not be a software necessary for the proper operation of the device and may not be used by the end user at all. Also will not give the possibility of any interference in the device operating parameters and records of sterilization or tests carried out.