SONTEC INSTRUMENTS, INC. 400-250Q Micro Surgery Needle Holder

KermaX Product family is designed to be installed in diagnostic x-ray units and is intended to be used for the measurement of Dose Area Product (DAP)/ DAP rate, exposure time.

An individual ophthalmic lens from a trial lens set. (lens holder)

Endopath Echelon Endoscopic Linear Cutter Reloads, Green, 60mm

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.

Straight collar tip 22Fr 7.3mm

2.4mm Round Bur

4.0mm Diamond Round Bur

KermaX Product family is designed to be installed in diagnostic x-ray units and is intended to be used for the measurement of Dose Area Product (DAP)/ DAP rate, exposure time.

An individual ophthalmic lens from a trial lens set. (lens holder)

Endopath Echelon Endoscopic Linear Cutter Reloads, Green, 60mm

The ECHELON, ECHELON ENDOPATH™ and ECHELON FLEX™ families of endoscopic linear cutters and reloads are sterile, single patient use instruments that simultaneously cut and staple tissue. There are six staggered rows of staples, three on either side of the cut line. The 45 mm instruments have a staple line thatis approximately 45 mm long and a cut line that is approximately 42 mm long. The shaft can rotate freely in both directions and an articulation mechanism on articulating instruments enables bending the distal portionof the shaft to facilitate lateral access of the operative site.The instruments are shipped without a reload and must be loaded prior to use. A staple retaining cap on the reload protects the staple leg points during shipping and transportation. The instruments’ lock-out feature is designed to prevent a used reload from being refired.