TRICOR SYSTEMS, INC. DCPW-BL1-MOB Dri-Scope Aid - Cabinet - Pump Wall (P3R) - Series 1840 - Mob Aspects

Dri-Scope Aid-Cabinet; Pump Wall BL1; Series 1840; DSAC-PW3-MOB-R; TRICOR Label; Refurbished;Dri-Scope Aid - Cabinet system is intended to aid in drying and venting internal channels of cleaned and disinfected endoscopes. The system is designed to cost-effectively convert existing passive cabinets (or closets) to active drying cabinets (or closets). The system can process as many as 16 endoscopes that are waiting in the queue. It provides pressure sensitive continuous flow of clean HEPA filtered air. Simply attach the endoscope, press the button to place the endoscope in the processing queue and the system will take care of the rest. After the drying cycle is complete, the system will periodically cycle dry air through the endoscope internal channels on a timed basis indefinitely until the endoscope is removed from the system. This (TRICOR Systems Inc - built / TRICOR Systems Inc - labeled) wall-mounted pump version is one component of the Dri-Scope Aid – Cabinet system that contains an internal pump used to provide HEPA filtered air to other parts of the system. This pump component is used along with 2 (or 1) of the Dri-Scope Aid - Manifolds which together works as a drying system. Note: this system has been programmed to accept external software commands and/or remote monitoring via Mobile Aspects proprietary hardware and software. This component has been refurbished to a condition of safety and effectiveness that is comparable to when new.