Mouthpiece, 22 mm

A device with a handle used to plug the end of an anesthesia circuit/breathing circuit at two possible locations: the Y-piece or the gas sampling elbow. The temporary plugging of the anesthesia breathing circuit allows anesthetic gases to be flushed from the anesthesia machine through the WAG (waste anesthetic gas) scavenging line by way of continuous oxygen/air flow rate over a set amount of time, or by activating the flush valve and applying positive bag pressure in repeated succession. This practice reduces the amount of anesthetic gas released into the operating room and thus reduces harmful gas exposure to operating room personnel and premature anesthetic gas exposure to patients during preoxygenation or mask induction.There is no patient contact as the plug must be removed before the breathing circuit can be attached to a mask, endo/naso-tracheal tube, or any other breathing device.

Tapered Connector - 22mm ID x 27mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 22mm ID x 22mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Swivel Adapter 22mm ID x 15mm ID/22mm OD. Specialty adapter for ventilator circuits/CPAP systems. Swivels 360 degrees. Molded of polypropylene. Single Patient Use.

General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circuit. Molded of polycarbonate. Reusable.

General Adapter - 22mm ID x 22mm ID adapter for use in breathing/ventilator circuit. Molded of polystyrene butadiene, Single Patient Use.

The BE 117-W Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Can be used to easily add a monitoring device such as a temperature probe to the breathing circuit. Dimensions: 22mm O.D. x 22mm I.D. x 15mm I.D./22mm O.D. Single Patient Use. Molded of High Density Polyethylene.

Specialty Adapter - 22mm ID x 22mm OD Adapter for ventilator circuits/CPAP systems. Molded of polystyrene butadiene. Single Patient Use.

The BE 125 Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Dimensions: 22mm O.D. x 15mm I.D./22mm O.D. x 15mm O.D./22mm O.D Reusable.

The BE 125-1 Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Dimensions: 22mm O.D. x 22mm O.D. x 15mm I.D./22mm O.D Reusable.

The BE 125-1T Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Dimensions: 22mm O.D. x 22mm I.D. x 15mm I.D./22mm O.D Reusable.

The BE 125-1TD Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Can be used to easily add a monitoring device such as a temperature probe to the breathing circuit. Dimensions: 22mm O.D. x 22mm I.D. x 15mm I.D. Single Patient Use. Molded of High Density Polyethylene.

BE 127 Wye Connector with (2) 22mm OD ports and (1) 15mm ID/22mm OD port. Fits components of adult ventilator circuits. Reusable.

BE 127-40 Wye Connector with (2) 22mm OD ports, (1) 15mm ID/22mm OD port and (1) barbed pressure port. Fits components of adult ventilator circuits. Reusable.

BE 127-7.5 Wye Connector with (2) 22mm OD ports, (1) 15mm ID/22mm OD port and 7.5mm temperature probe port. Fits components of adult ventilator circuits. Reusable.

BE 127-7.5-40 Wye Connector with (2) 22mm OD ports, (1) 15mm ID/22mm OD port, (1) 7.5mm ID temperature probe port, and (1) barbed pressure port. Fits components of adult ventilator circuits. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 22mm O.D. x 30mm O.D. Molded of polycarbonate. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 22mm I.D. x 30mm I.D. Molded of polycarbonate. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 22mm I.D. x 30mm O.D. Molded of polycarbonate. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 22mm O.D. x 30mm I.D. Molded of polycarbonate. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 15mm I.D./22mm O.D. x 30mm I.D. Molded of polyetherimide. Reusable.

90 degree Elbow Connector - 15mm ID/22mm OD x15mm OD. Molded of polystyrene butadiene. Single patient use.

90 degree Elbow Connector with Luer Lock Port - 15mm ID/22mm OD x15mm OD. Molded of polycarbonate. Reusable.

90 degree Elbow Connector with Barbed Port that fits 3/16" ID tubing - 15mm ID/22mm OD x15mm OD. Molded of polycarbonate. Reusable.

90 degree Elbow Connector - 15mm ID/22mm OD x15mm OD. Molded of polycarbonate. Reusable.

KC 211-D Wye connector with one - 18mm ID/22mm OD nebulizer port x (3) 22mm OD ports. Fits components of adult ventilator circuits. Single Patient Use.

KC 212-D Wye connector with one - 18mm ID/22mm OD nebulizer port x (3) 22mm OD ports. Fits components of adult ventilator circuits. Single Patient Use.

General Adapter - 15mm ID/22mm OD x 15mm ID/22mm OD. Fits components of adult ventilator circuits/CPAP systems. Molded of polystyrene butadiene. Single Patient Use.

Reducing adapter for use in breathing/ventilator circuit. 22mm ID x 22mm OD. Molded of polystyrene butadiene. Single Patient Use.

KC 213-D Wye connector with (3) 22mm OD ports. Fits components of adult ventilator circuits. Single Patient Use.

The KM 030 Disposable Connector with LCD Thermometer is intended for use in a ventilator circuit, or a heated aerosol circuit. The LCD thermometer gives approximate temperature readings only and is not a substitute for definitive temperature monitoring. Dimensions: 22mm O.D. x 22mm I.D. Single Patient Use. Molded of High Density Polyethylene.

Reducing Adapter for use in breathing/ventilator circuit. - 22mm I.D. x 15mm I.D/22mm O.D. Molded of polycarbonate. Reusable.

Reducing Connector - 22mm ID x 15mm ID. Fits components of adult ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 10mm ID x 10mm ID. Fits components of neonatal ventilator circuits. Molded of silicone rubber. Reusable.

Reducing Connector - 15mm ID x 10mm ID. Fits components of pediatric to neonatal ventilator circuits. Molded of silicone rubber. Reusable.

Straight Connector - 15mm ID x 15mm ID. Fits components of pediatric ventilator circuits. Molded of silicone rubber. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 15mm O.D. x 22mm I.D. Molded of polysulfone. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. 15mm ID x 22mm ID. Molded of polystyrene butadiene. Single Patient Use.

General Adapter 10mm OD x 10mm OD. Fits components of neonatal ventilator circuits/CPAP systems. Molded of polysulfone. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 10mm O.D. x 22mm I.D. Molded of polycarbonate. Reusable.

Reducing Adapter for use in breathing/ventilator circuit. - 30mm I.D. x 22mm O.D. Molded of polysulfone. Reusable.

The SG 218 Aerosol Tee Adapter is intended for use in a ventilator, oxygen or BIPAP circuit. Dimensions: 22mm O.D. x 18mm I.D./22mm O.D. x 18mm I.D./22mm O.D Reusable.

Delivery Extension Hose

Extension Hose Kit (with Scavenger)

Scavenger Cap

Universal Analgesia Kit

Exhalation Valve

Ruggedized Patient Breathing Circuit, each

Ruggedized Patient Breathing Circuit, case of 10