This breathing circuit connector is suitable for situation where one arm of the elbow connector should be shortened.

This device can be used with bronchial occluders and allow Magill Medical's Videoscope to visually monitor bronchial airway.

This 90° 3-way elbow connector allows passage for suction cathers and compitable to standard 22mm connector.

A 3-way connector where one of the open is capped. Allow passage of suction cathers or bronchoscopes.

Smoothbore Tube Pediatric 1.1m (43") Reusable 22F-15F (038-02-238RGE)

Split-Lumen Adult 1.8m (71") Circuit 1 (038-01-902eaGE)

Following Device Identifier numbers are included in this KIT:17325710002619,17325710004576,17325710002176,17325710002374

Following Device Identifier numbers are included in this KIT:17325710002503,17325710004576,17325710002367

Following Device Identifier numbers are included in this KIT:17325710002169,17325710004576,17325710002091,17325710002398

Following Device Identifier numbers are included in this KIT:17325710002244,17325710004576,17325710002466

Following Device Identifier number are included in this KIT:17325710002596,17325710004576

Medisize Breathing Circuit Pediatric, 48 inch(120cm)

Medisize Breathing Circuit Pediatric, 60 inch(150cm)

Medisize Breathing Circuit Pediatric, 72 inch(180cm)

Medisize Breathing Circuit Pediatric, 80 inch(210cm)

Medisize Breathing Circuit Adult, 48 inch(120cm)

Medisize Breathing Circuit Adult, 60 inch(150cm)

The O-Two single-use ventilation circuit is designed to be used with ventilators, demand valve or gas mixers to deliver oxygen or nitrous oxide and oxygen mixture gas to patients. It consists of one corrugated breathing hose, an inspiratory one-way valve. The 01CV8010 is specifically designed for use on Bag-Valve-Mask resuscitators and ventilators without demand breathing or patient triggered ventilation modes.

The O-Two single-use ventilation circuit is designed to be used with ventilators, demand valve or gas mixers to deliver oxygen or nitrous oxide and oxygen mixture gas to patients. It consists of one corrugated breathing hose, an inspiratory one-way valve, and a PEEP port. The 01CV8015 with anti-entrainment flapper is specifically designed for use on O-Two automatic resuscitators and transport ventilators and other ventilators that respond to the spontaneous breathing.

The O-Two single-use ventilation circuit is designed to be used with ventilators, demand valve or gas mixers to deliver oxygen or nitrous oxide and oxygen mixture gas to patients. It consists of one corrugated breathing hose, an inspiratory one-way valve, and a PEEP port. The 01CV8016 is specifically designed for use with CAREvent MRI ventilators and is long enough to allow free passage of the patient in and out of the MRI unit without the risk of pulling on the tubing.

The O-Two single-use ventilation circuit is designed to be used with ventilators, demand valve or gas mixers to deliver oxygen or nitrous oxide and oxygen mixture gas to patients. It consists of one corrugated breathing hose, an inspiratory one-way valve, and a PEEP port. The 01CV8019 with anti-entrainment flapper and facemask/mouth piece is specifically designed for use with O-Two Equinox Relieve and Equinox Advantage nitrous oxide and oxygen gas mixing and delivery units.

The O-Two single-use electronic ventilator ventilation circuit consists of a single ventilation corrugated hose and equipped with a flow sensor adapter designed to stream the flow without turbulence and create a differential pressure in two points which are connected to differential pressure sensor used to calculate flow. The unique one-way check valve will only allow flow from ventilator to patient and prevent the exhaled flow flowing back to the ventilator. All exhaled flow will be forced out to the atmosphere through the exhausted port of the breathing valve. The 01CV8030 is specifically designed for use with o_two e700, e600 and e500 electronic transport ventilators.